NextSDS Logo
Safety Data Sheet EN

Dehydroaripiprazole, 1mg/ml in Methanol

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Dehydroaripiprazole, 1mg/ml in Methanol
Product Form
Mixture
Product Code
LPM-ARP-1883-1LM

Regulatory Identifiers

CAS Number
N/A
UFI Code
KH9G-K0N7-1002-VAQM

Identified Uses

Laboratory use

Uses advised against

No information available

Manufacturers & Suppliers

LGC Limited logo

LGC Limited

manufacturer

Queens Road, Teddington, Middlesex TW11 0LY, UNITED KINGDOM

+44 (0) 20 8943 7000

http://www.lgcstandards.com

Emergency Contacts

CHEMTREC

1-800-424-9300

CHEMTREC

+1 703-741-5970

Emergency Contact

112

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Irrit. Cat. 2 H319
Flam. Liq. Cat. 2 H225

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H225 Highly flammable liquid and vapour
H319 Causes serious eye irritation

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P233 Keep container tightly closed
P337 + P313 If eye irritation persists: Get medical advice/attention
P363 Wash contaminated clothing before reuse
P370 + P378 In case of fire: Use dry chemical, CO2, water spray or alcohol-resistant foam to extinguish
P403 + P235 Store in a well-ventilated place. Keep cool

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of organic compounds.

Chemical Name CAS Number Concentration Hazardous
Ethanol EC: 200-578-6 64-17-5 80 - 100% Yes
Dehydroaripiprazole EC: 802-933-6 129722-25-4 0.1 - 1% Yes

This product does not contain candidate substances of very high concern at a concentration >=0.1% (Regulation (EC) No. 1907/2006 (REACH), Article 59)

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air.

Skin contact

Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.

Symptoms: Burning sensation.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Do not rub affected area. Remove contact lenses, if present and easy to do. Continue rinsing.

Symptoms: Redness and tearing of the eyes.

Ingestion

Rinse mouth. Never give anything by mouth to an unconscious person. Do NOT induce vomiting.

Immediate Medical Attention

Get medical attention if irritation develops and persists. Call a doctor.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry chemical. Carbon dioxide (CO2). Water spray. Alcohol resistant foam.

Unsuitable media

Do not scatter spilled material with high pressure water streams.

Specific hazards

Risk of ignition. Keep product and empty container away from heat and sources of ignition.

Instructions

CAUTION: Use of water spray when fighting fire may be inefficient.

Firefighter Protection

Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak. Do not touch or walk through spilled material.

Environmental

Refer to protective measures listed in Sections 7 and 8. Prevent further leakage or spillage if safe to do so. Prevent product from entering drains.

Cleanup methods

Dam up. Soak up with inert absorbent material. Pick up and transfer to properly labelled containers.

Materials: inert absorbent material

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use personal protection equipment. Avoid breathing vapours or mists. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product.

Storage

Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat, sparks, flame and other sources of ignition (i.e., pilot lights, electric motors and static electricity). Keep in properly labelled containers. Do not store near combustible materials. Keep in an area equipped with sprinklers. Store in accordance with the particular national regulations. Store in accordance with local regulations. Please refer to the manufacturer's certificate for specific storage and transport temperature conditions. Store only in the original receptacle unless other advice is given on the CoA.

Hygiene

Contaminated work clothing should not be allowed out of the workplace. Regular cleaning of equipment, work area and clothing is recommended. Wash hands before breaks and immediately after handling the product. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Wash hands before breaks and after work. Wear suitable gloves and eye/face protection.

Fire prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding and bonding connection when transferring this material to prevent static discharge, fire or explosion. Keep in an area equipped with sprinklers.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.

Hands

Wear protective butyl rubber gloves. Wear suitable gloves. Impervious gloves. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374.

Eyes

Tight sealing safety goggles. Avoid contact with eyes. Wear safety glasses with side shields (or goggles).

Respiratory

No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.

Skin/Body

Long sleeved clothing. Chemical resistant apron. Antistatic boots. Wear suitable protective clothing.

Environmental

Do not allow into any sewer, on the ground or into any body of water.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Liquid
Colour
colourless
Colour Intensity
---
Form
---
Odor
Alcohol.
Odor Threshold
No information available
Ph
No data available
Melting Point
-114.1 °C
Boiling Point
78.3 °C
Flash Point
13 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
No data available
Vapor Density
---
Relative Density
No data available
Bulk Density
No data available
Density
---
Flammability
No data available
Upper Explosive Limit
3.1% - 59 g/m³
Lower Explosive Limit
27.7% - 532 g/m³
Explosive Limits
---
Auto Ignition Temperature
No data available °C
Decomposition Temperature
---
Solubility
---
Partition Coefficient
No data available
Solubility In Water
No data available
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
1.2 mPa·s
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

No information available.

Hazardous reactions

None under normal processing.

Avoid

Sensitivity to static discharge Yes.

Incompatible

None known based on information supplied.

Decomposition

None known based on information supplied.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Ecotoxicity Toxic to aquatic life. Unknown aquatic toxicity Contains 0 % of components with unknown hazards to the aquatic environment. | Chemical name | Algae/aquatic plants | Fish | Toxicity to microorganisms | Crustacea | | --- | --- | --- | --- | --- |

The product is classified as toxic to aquatic life.

12.2 Persistence and degradability

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.1. Toxicity

| Chemical name | Algae/aquatic plants | Fish | Toxicity to microorganisms | Crustacea | | --- | --- | --- | --- | --- | | Ethanol | - | LC50: 12.0 - 16.0mL/L (96h, Oncorhynchus mykiss) LC50: 13400 - 15100mg/L (96h, Pimephales promelas) LC50: >100mg/L (96h, Pimephales promelas) | - | LC50: 9268 - 14221mg/L (48h, Daphnia magna) EC50: =2mg/L (48h, Daphnia magna) |

12.2. Persistence and degradability

Persistence and degradability No information available.

No information available.

12.3. Bioaccumulative potential

Bioaccumulation There is no data for this product. Component Information | Chemical name | Partition coefficient | | --- | --- |

There is no data for this product.

12.3. Bioaccumulative potential

| Chemical name | Partition coefficient | | --- | --- | | Ethanol | -0.35 |

Mobility in soil

No information available.

12.5. Results of PBT and vPvB assessment

PBT and vPvB assessment The product does not contain any substance(s) classified as PBT or vPvB. | Chemical name | PBT and vPvB assessment | | --- | --- | | Ethanol | The substance is not PBT / vPvB PBT assessment does not apply |

The product does not contain any substance(s) classified as PBT or vPvB. Ethanol is not considered PBT or vPvB.

12.6. Endocrine disrupting properties

Endocrine disrupting properties No information available.

No information available.

12.7. Other adverse effects

No information available.

No information available.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.

Disposal

Should not be released into the environment.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1170
Shipping Name
Ethanol mixture
Transport Class
3
Packing Group
II
IMDG

Special Provisions 144

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Safety data sheet created pursuant to the requirements of: Regulation (EC) No. 1907/2006 and Regulation (EC) No. 1272/2008

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Dehydroaripiprazole, 1mg/ml in Methanol?

The signal word is danger.

What is the physical form of Dehydroaripiprazole, 1mg/ml in Methanol?

Dehydroaripiprazole, 1mg/ml in Methanol is a liquid appearing as liquid with colourless color. It has alcohol. odor.

What is Dehydroaripiprazole, 1mg/ml in Methanol used for?

Laboratory use

What are the hazard statements for Dehydroaripiprazole, 1mg/ml in Methanol?

This substance has 2 hazard statements:

  • H225: Highly flammable liquid and vapour
  • H319: Causes serious eye irritation

What is the melting point of Dehydroaripiprazole, 1mg/ml in Methanol?

The melting point is -114.1 °C and the boiling point is 78.3 °C.