Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- EDTA buffer solution pH 8.0 (0.5 mol/l), sterile BIOTECHNOLOGY GRADE
- Product Code
- E177
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
General chemical reagent
Uses advised against
The product, as such or as a component of a mixture, is not intended to be used by consumers (as defined by the REACH Regulation).
Manufacturers & Suppliers
VWR International Ltd.
national supplier
Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN, UK
0800 22 33 44
Emergency Contacts
CareChem24
+44 (0) 1270 502894
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| EDTA disodium salt dihydrate EC: 205-358-3 | 6381-92-6 | 10 - 20% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. If unconscious but breathing normally, place in recovery position and seek medical advice.
Symptoms: Cough.
Wash off any skin contamination immediately. When in doubt or if symptoms are observed, get medical advice.
Symptoms: No known symptoms to date.
Rinse immediately carefully and thoroughly with eye-bath or water. Remove contact lenses, if present and easy to do. Continue rinsing. When in doubt or if symptoms are observed, get medical advice.
Symptoms: No known symptoms to date.
Rinse mouth thoroughly with water. Do NOT induce vomiting. Call a POISON CENTER.
Symptoms: No known symptoms to date.
Immediate Medical Attention
When in doubt or if symptoms are observed, get medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
ABC-powder, Carbon dioxide (CO2), Dry sand, Nitrogen
Water spray, Full water jet
Non-combustible liquids. Fire may produce irritating, corrosive and/or toxic gases.
Co-ordinate fire-fighting measures to the fire surroundings.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove victim out of the danger area. First Aid, decontamination, treatment of symptoms.
No special environmental measures are necessary.
Take up mechanically, placing in appropriate containers for disposal.
Related Products
Similar products with comparable safety profiles
EDTA (0.5M, pH 7.4)
---
EDTA Solution, 17%
---
EDTA DISODIUM SALT 0.5M (1N) STANDARDIZED SOLUTION
UFI: N6UM-9QA6-EX3G-1VTJ
Tris-Borate-EDTA buffer
UFI: NK12-M629-V99J-C9MW
EDTA Disodium, dihydrate
---
EDTA 1% in DPBS, w/o: Ca and Mg
---
EDTA Tetrasodium Salt 0.800 ± 0.004 M
---
BDH Buffer Solution pH 7.0 (Phosphate)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke. Provide eye shower and label its location conspicuously.
Store in a well-ventilated place. Keep container tightly closed.
Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke.
No special measures are necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374 in the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,12 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-0998. By long-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,38 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-3717 / 112-1381
Eye glasses with side protection DIN-/EN-Norms EN 166. Recommendation: VWR 111-0432
Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (EN 136/140). Recommendation: VWR 111-0206. Suitable material: ABEK2P3. Recommendation: VWR 111-0059
Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.
no data available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
This material is non-reactive under normal conditions.
No information available.
No further relevant information available.
No further relevant information available.
No known hazardous decomposition products. Decomposition products in case of fire: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT/vPvB assessment
The substances in the mixture do not meet the PBT/vPvB criteria according to REACH, annex XIII.
12.6 Endocrine disrupting properties
The product does not contain a substance that has endocrine disrupting properties with respect to the environment.
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal.
Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for EDTA buffer solution pH 8.0 (0.5 mol/l), sterile BIOTECHNOLOGY GRADE?
The signal word is warning.
What is the physical form of EDTA buffer solution pH 8.0 (0.5 mol/l), sterile BIOTECHNOLOGY GRADE?
EDTA buffer solution pH 8.0 (0.5 mol/l), sterile BIOTECHNOLOGY GRADE is a liquid with colourless color. It has no data available odor.
What is EDTA buffer solution pH 8.0 (0.5 mol/l), sterile BIOTECHNOLOGY GRADE used for?
General chemical reagent
What are the hazard statements for EDTA buffer solution pH 8.0 (0.5 mol/l), sterile BIOTECHNOLOGY GRADE?
This substance has 1 hazard statement:
- H373: May cause damage to organs through prolonged or repeated exposure.
What is the melting point of EDTA buffer solution pH 8.0 (0.5 mol/l), sterile BIOTECHNOLOGY GRADE?
The melting point is no data available and the boiling point is no data available.