Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOTIP CLEAR VARNISH High Gloss
- Product Code
- 04009, 02001
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Paint
Manufacturers & Suppliers
MOTIP DUPLI B.V.
manufacturer
Wolframweg 2, NL-8471 XC Wolvega, The Netherlands
+31 (0)561 694400
Emergency Contacts
Emergency Contact
+31 (0)561 694400
08.00 / 17.00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| dimethyl ether EC: 204-065-8 | 115-10-6 | 50 - 75% | Yes |
| Solvent naphtha (petroleum), light arom. EC: 265-199-0 | 64742-95-6 | 10 - 12.5% | Yes |
| xylene EC: 215-535-7 | 1330-20-7 | 5 - 10% | Yes |
| Naphtha (petroleum), hydrotreated light EC: 265-151-9 | 64742-49-0 | 5 - 10% | Yes |
| butan-1-ol EC: 200-751-6 | 71-36-3 | 5 - 10% | Yes |
For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation. Provide fresh air.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water.
Drink plenty of water.
Immediate Medical Attention
If symptoms persist, consult a doctor. Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Water with full jet
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation
Do not allow product to reach sewage system or any water course. Do not allow to enter sewers/ surface or ground water.
Ensure adequate ventilation.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special measures required. Ensure good ventilation/exhaustion at the workplace. Open and handle receptacle with care.
Store in a cool location. Observe official regulations on storing packagings with pressurized containers. Keep container tightly sealed. Do not seal receptacle gas tight. Store in cool, dry conditions in well sealed receptacles. Protect from heat and direct sunlight.
Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No dangerous reactions known.
No decomposition if used according to specifications.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials.
Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use. Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition - No smoking. Keep out of the reach of children.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOTIP CLEAR VARNISH High Gloss?
The signal word is danger.
What is the physical form of MOTIP CLEAR VARNISH High Gloss?
MOTIP CLEAR VARNISH High Gloss is a aerosol with according to product specification color. It has characteristic odor.
What is MOTIP CLEAR VARNISH High Gloss used for?
Paint
What are the hazard statements for MOTIP CLEAR VARNISH High Gloss?
This substance has 7 hazard statements:
- H220: Extremely flammable gas.
- H222: Extremely flammable aerosol.
- H312: May be harmful in contact with skin.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of MOTIP CLEAR VARNISH High Gloss?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..