Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SevoFlo
- Chemical Name
- Sevoflurane
- Synonyms
- 1,1,1,3,3,3-Hexafluoro-2-(fluoromethoxy) propane; Fluoromethyl-2,2,2-trifluoro-1-(trifluoromethyl) ethyl ether
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Veterinary product used as anesthetic agent
Manufacturers & Suppliers
Zoetis Inc.
manufacturer
100 Campus Drive, P.O. Box 651, Florham Park, New Jersey 07932 (USA)
1-800-366-5288
Zoetis Belgium S.A.
national supplier
Mercuriusstraat 20, 1930 Zaventem, Belgium
Emergency Contacts
Rocky Mountain Poison and Drug Center
1-866-531-8896
CHEMTREC
1-800-424-9300
24 hours
CHEMTREC
+1-703-527-3887
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sevoflurane | 28523-86-6 | 100% | Yes |
Ingredient(s) indicated as hazardous have been assessed under standards for workplace safety.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air and keep patient at rest.
Remove contaminated clothing. Flush area with large amounts of water. Use soap.
Flush with water while holding eyelids open for at least 15 minutes.
Never give anything by mouth to an unconscious person. Wash out mouth with water. Do not induce vomiting unless directed by medical personnel.
Immediate Medical Attention
Seek medical attention immediately.
Medical Treatment
May reduce blood pressure. Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder, foam, or water.
Not flammable. Fine particles (such as mists) may fuel fires/explosions.
Firefighter Protection
During all fire fighting activities, wear appropriate protective equipment, including self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Personnel must wear appropriate protective equipment. Contain the source of spill if it is safe to do so. Collect spill with absorbent material. Clean spill area thoroughly. Prevent discharge to drains. For large spills: Non-essential personnel should be evacuated. Report emergency situations immediately. Clean up operations should only be undertaken by trained personnel. Shut off all electrical equipment if it is safe to do so.
Non-essential personnel should be evacuated from affected area. Report emergency situations immediately. Clean up operations should only be undertaken by trained personnel. Provide adequate ventilation. Contain the source of the spill or leak and shut off all electrical equipment if it is safe to do so. Use absorbant material to wipe up spill and place in a sealed container for disposal. Clean spill area thoroughly. Prevent runoff from entering waterways or sewers. Prevent discharge to drains.
Care should be taken to avoid environmental release.
Collect spill with absorbent material. Use absorbant material to wipe up spill and place in a sealed container for disposal.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
When handling, use appropriate personal protective equipment (see Section 8). Use with adequate ventilation. Minimize generating airborne mists and vapors. Avoid open handling. Use local exhaust ventilation or perform work under fume hood/fume cupboard. Restrict access to work area. Avoid breathing vapor or mist. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling.
Keep containers tightly closed in a cool, well-ventilated place. Store as directed by product packaging. Keep out of reach of children.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of use.
No data available
Avoid direct sunlight, conditions that might generate heat, and sources of ignition.
Strong oxidizing agents, strong bases, Alkali metals
Thermal decomposition products may include carbon monoxide, carbon dioxide and other toxic vapors. Thermal decomposition products may include fluorine and Hydrogen fluoride.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
Bio-accumulative Potential
Mobility in Soil
No data available
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste in accordance with all applicable laws and regulations. Member State specific and Community specific provisions must be considered. Considering the relevant known environmental and human health hazards of the material, review and implement appropriate technical and procedural waste water and waste disposal measures to prevent occupational exposure and environmental release. It is recommended that waste minimization be practiced. The best available technology should be utilized to prevent environmental releases. This may include destructive techniques for waste and wastewater.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3334
- Shipping Name
- Aviation regulated liquid, n.o.s. (sevoflurane)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is SevoFlo known by?
SevoFlo is also known as: 1,1,1,3,3,3-Hexafluoro-2-(fluoromethoxy) propane; Fluoromethyl-2,2,2-trifluoro-1-(trifluoromethyl) ethyl ether
What is the hazard signal word for SevoFlo?
The signal word is warning.
What is the physical form of SevoFlo?
SevoFlo is a liquid with clear, colorless color. It has ethereal odor.
What is the solubility of SevoFlo?
Miscible: Ethanol Ether Chloroform Benzene
What is SevoFlo used for?
Veterinary product used as anesthetic agent
What are the hazard statements for SevoFlo?
This substance has 4 hazard statements:
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H336: May cause drowsiness and dizziness
- H412: Harmful to aquatic life with long lasting effects
What is the melting point of SevoFlo?
The melting point is No data available and the boiling point is 58.6C / 137.5F.