NextSDS Logo
Safety Data Sheet EN

SOLVO KLEEN 40

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SOLVO KLEEN 40
Product Code
0642G

Regulatory Identifiers

CAS Number
N/A
UFI Code
PWT3-T0G6-M009-Y26Q

Identified Uses

Solvent degreaser.

Manufacturers & Suppliers

NCH UK & Ireland logo

NCH UK & Ireland

national supplier

Arrowmere House, Bilston, WV14 0QL

042 939 5502

http://www.ncheurope.com

Emergency Contacts

NCH UK

01902 510200

available during Office Hours

Republic of Ireland

01 809 2166

available from 8am to 10pm daily

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 3 H226
Asp. Tox. Cat. 1 H304
Aquatic Chronic Cat. 2 H411
EUH066 EUH066

GHS Pictograms

GHS02 - Flammable

GHS02

GHS08 - Serious health hazard

GHS08

GHS09 - Environmental hazard

GHS09

Hazard Statements

H226 Flammable liquid and vapour
H304 May be fatal if swallowed and enters airways
H411 Toxic to aquatic life with long lasting effects

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P273 Avoid release to the environment
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTRE or doctor.
P331 Do NOT induce vomiting
P370 + P378 In case of fire, use water spray/foam/chemical powder to extinguish.
P391 Collect spillage

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
HYDROCARBONS, C10-C12, ISOALKANES, < 2% AROMATICS EC: 923-037-2 --- 50 - 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If problems with breathing occur, move to fresh air. If symptoms persist, call a doctor. If exposed to high concentrations of the vapours / mists, move to fresh air.

Symptoms: Inhalation of mists may result in irritation to the respiratory tract. May cause headaches, dizziness, drowsiness and nausea.

Skin contact

Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes. Get medical attention if irritation develops and persists.

Symptoms: Prolonged contact will dry and defat the skin and may cause irritation such as itching and redness.

Eye contact

In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Call a doctor immediately.

Symptoms: May cause irritation as itching and redness.

Ingestion

Rinse mouth with water. If swallowed, do not induce vomiting - seek medical advice.

Symptoms: Aspiration into lungs on ingestion or vomiting may cause bronchopneumonia or pulmonary oedema which can be fatal.

Immediate Medical Attention

Get medical attention immediately if symptoms occur.

Medical Treatment

Treat symptomatically. Aspiration hazard if swallowed - can enter lungs and cause damage.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use.: Dry powder. Alcohol-resistant foam. Water spray.

Unsuitable media

Water jet.

Specific hazards

When exposed to high temperatures, the preparation may release dangerous decomposition products such as carbon monoxide and dioxide, smoke and/or nitrogen oxide.

Firefighter Protection

Firefighters should wear a self-contained breathing apparatus and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid contact with skin, eyes, and clothing. Use personal protective equipment. See chapter 8. Prevent further leakage or spillage if safe to do so. Material can create slippery conditions. Remove all sources of ignition. Ventilate the area. Evacuate personnel to safe areas.

Environmental

Avoid release of neat product into surface water and sanitary sewage system. Prevent further leakage or spillage if safe to do so. Insoluble in water and hence will float on the surface.

Cleanup methods

Take up mechanically and collect in suitable container for disposal. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). For the non volatile residues.: Clean preferably with a detergent, do not use solvents.

Materials: sand, silica gel, acid binder, universal binder, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid breathing vapours or mists. Do not eat, drink or smoke when using this product. Keep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharges. Never siphon by mouth.

Storage

Store in original container. Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat and sources of ignition. P401 - Store in accordance with local regulations.

Hygiene

Do not eat, drink or smoke when using this product.

Fire prevention

Keep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Local ventilation is suggested to control exposure from operations that can generate significant levels of vapour, mist or fumes. Ensure adequate ventilation, especially in confined areas.

Hands

Wear suitable protective gloves conforming to EN 374. Type of gloves suggested : Solvent-resistant gloves (butyl-rubber). Fluorinated rubber. Polyvinyl alcohol. Minimum breakthrough time of the glove material (protective index 4, breakthrough time: >120 min). Suitability and durability of a glove is dependent upon usage factors such as frequency, duration of use, temperature and chemical resistance. The use of a chemical-protective glove may in practice be much shorter than the permeation time determined through testing. For break through times, refer to glove manufacturers recommendations.

Eyes

Safety glasses if the method of use presents the likelihood of eye contact. Approved to EN 166.

Respiratory

In case of inadequate ventilation wear respiratory protection. Conforming to EN 14387 (organic vapours). Do not breathe vapours or spray mist.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Fat
---
Freezing Point
---
Vapor Density
---
Decomposition Temperature
No information available
Density
---
Relative Density
0.75
Physical State
Liquid
Form
---
Flash Point
40 °C
Partition Coefficient
---
Colour Intensity
---
Crystallisation Point
---
Boiling Point
160 - 200 °C
Solubility In Water
Insoluble in water
Properties Status
---
Auto Ignition Temperature
260 °C
Kinematic Viscosity
< 2 cst at 40 °C
Cloud Point
---
Vapor Pressure
> 0.01 kPa at 20°C
Odor
Hydrocarbon
Metal Corrosion
---
Explosive Limits
---
State Under Standard Conditions
---
Colour
Colourless
Bulk Density
---
Softening Point
---
Ph
Not applicable
Molecular Weight
---
Evaporation Rate
0.18 (Butyl acetate=1)
Relative Evaporation Rate
---
Flammability
---
Lower Explosive Limit
0.6
Upper Explosive Limit
7.0
Odor Threshold
---
Physical State Data
liquid
Appearance
Colourless
Solubility
Insoluble in water
Melting Point
No data available
Voc Content
100 %
Dynamic Viscosity
---
Solidification Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

Not considered as highly reactive. See further information below.

Hazardous reactions

The mixture itself will not dangerously react or polymerise to create hazardous conditions in normal use.

Avoid

Heat, flames, and sparks.

Incompatible

Strong oxidising agents.

Decomposition

None under normal storage conditions and use. When exposed to high temperatures, the preparation may release dangerous decomposition products such as carbon monoxide and dioxide, smoke and/or nitrogen oxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of in accordance with local regulations.

Waste Codes

14 06 03* other solvents and solvent mixtures EWC
07 07 04* other organic solvents, washing liquids and mother liquors EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3295
Shipping Name
Hydrocarbons, liquid, n.o.s.
Transport Class
3
Packing Group
III
ADR

No special precautions.

IMDG

No special precautions.

IATA

No special precautions.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SOLVO KLEEN 40?

The signal word is danger.

What is the physical form of SOLVO KLEEN 40?

SOLVO KLEEN 40 is a liquid appearing as colourless with colourless color. It has hydrocarbon odor.

What is the solubility of SOLVO KLEEN 40?

Insoluble in water

What is SOLVO KLEEN 40 used for?

Solvent degreaser.

What are the hazard statements for SOLVO KLEEN 40?

This substance has 3 hazard statements:

  • H226: Flammable liquid and vapour
  • H304: May be fatal if swallowed and enters airways
  • H411: Toxic to aquatic life with long lasting effects

What is the melting point of SOLVO KLEEN 40?

The melting point is No data available and the boiling point is 160 - 200 °C.