Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- USIP Black Stencil Ink
- Product Code
- 20111, 20121
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Not intended for food contact.
Uses advised against
Keep out of reach of children.
Manufacturers & Suppliers
U-Mark, Inc
manufacturer
102 Iowa Ave., Belleville, IL 62220
618-235-7500
Emergency Contacts
Infotrac
1-800-535-5053
Infotrac
1-352-323-3500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Diacetone Alcohol | 123-42-2 | 70% | No |
| C.I. Solvent Black 7 | 8005-02-5 | 10% | No |
| Aniline | 62-53-3 | 0.25% | No |
| Diphenylamine | 122-39-4 | 0.25% | No |
| Nitrobenzene | 98-95-3 | 0.02% | No |
* Denotes components that are subject to the reporting requirements of Section 313 of the Emergency Planning and Community Right to Know Act of 1986 (EPCRA or SARA Title III) and 40 CFR 372.
First Aid Measures
Emergency procedures for chemical exposure incidents
If symptoms develop, immediately move individual away from exposure and into fresh air. Seek immediate medical attention; keep person warm and quiet. If person is not breathing, begin artificial respiration. If breathing difficult, administer oxygen.
Remove contaminated clothing. Flush exposed area with large amounts of soap and water. Launder clothing before reuse.
Wash eyes immediately with water or saline solution for 20 to 30 minutes. If symptoms persist or there is visual difficulty, seek medical attention.
If victim is conscious and breathing- do not induce vomiting! Give 1 to 2 glasses of water to dilute the chemical and immediately call a Poison Control center or doctor. If the victim is unconscious or convulsing- do not give anything by mouth. Ensure victim's airway is open. Lay the victim on his or her side with the head lower than the body. Do not induce vomiting- seek immediate medical attention.
Immediate Medical Attention
Seek immediate medical attention; keep person warm and quiet. If symptoms persist or there is visual difficulty, seek medical attention. Immediately call a Poison Control center or doctor.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water fog, CO2, dry chemical
Material may show self-heating properties if stored above 140 °C / 284 °F.
Use extinguishing media appropriate to materials stored nearby.
Firefighter Protection
Firefighters should be equipped with self-contained breathing apparatus and turn-out gear. Wear positive pressure self-contained breathing apparatus (SCBA). Structural firefighter's protective clothing provides limited protection in fire situations only; it is not effective in spill situations where direct contact with the product is possible.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate area. Remove all sources of ignition. Only personnel with emergency response training and the appropriate personal protective equipment should attempt spill clean-up.
Prevent from entering drains, sewers, streams or other bodies of water.
Dampen the solid spill material with methanol, and then transfer the dampened material to a suitable container. Use absorbent paper dampened with methanol to pick up any remaining material.
Materials: methanol, absorbent paper
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well ventilated areas. Do not breathe dust. Prevent deposition of dust. Do not expose to friction or shock. Prevent electrical / static discharges by grounding and use of explosion proof equipment. Keep containers cool before opening. Use care when opening containers.
Store in a cool, dry place away from sources of ignition and from freezing. Ensure adequate ventilation. Store locked up.
Store away from sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Hazardous Polymerization will not occur.
excessive heat, open flames, and sources of ignition
oxidizing agents
Carbon Monoxide, Carbon Dioxide, and Nitrogen Oxide(s)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
Persistence and Degradability
Bioaccumulative Potential
Mobility in soil
Results of PBT and vPvB assessment
The product does not meet the REACH criteria for PBT or vPvB.
Other Adverse Effects
The acute and chronic effect on the aquatic environment could not be classified due to product's poor solubility.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local, State, and Federal regulations.
Dispose of in accordance with local, State, and Federal regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1210
- Shipping Name
- Printing Ink
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for USIP Black Stencil Ink?
The signal word is warning.
What is the physical form of USIP Black Stencil Ink?
USIP Black Stencil Ink is a liquid . It has mild alcohol odor.
What is the solubility of USIP Black Stencil Ink?
< 0.1mg/L at 20°C (water)
What is USIP Black Stencil Ink used for?
Not intended for food contact.
What are the hazard statements for USIP Black Stencil Ink?
This substance has 7 hazard statements:
- H303: May be harmful if swallowed
- H313: May be harmful in contact with skin
- H317: May cause an allergic skin reaction
- H333: May be harmful if inhaled
- H351: Suspected of causing cancer
- H361: Suspected of damaging fertility
- H373: May cause damage to cardiovascular system, blood, bladder, kidneys, and liver through prolonged or repeated exposure