Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 2-Chloroacetamide
- Product Code
- A15238
- Chemical Name
- 2-Chloroacetamide
- Synonyms
- Chloroacetamide; alpha-Chloroacetamide; 2-Chloroethanamide.
Regulatory Identifiers
- CAS Number
- 79-07-2 Check regulations →
Identified Uses
Laboratory chemicals.
Uses advised against
Food, drug, pesticide or biocidal product use.
Manufacturers & Suppliers
Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
800-343-0660
http://www.alfa.com
Emergency Contacts
Emergency Contact
(800) 343-0660
Monday-Friday, 8am-7pm EST
Carechem 24
(866) 928-0789
After normal business hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS06
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-Chloroacetamide | 79-07-2 | 98% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from exposure, lie down. Remove to fresh air. If not breathing, give artificial respiration. Immediate medical attention is required.
Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Immediate medical attention is required.
Symptoms: May cause allergic skin reaction.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Call a physician immediately. Clean mouth with water.
Immediate Medical Attention
Immediate medical attention is required.
Medical Treatment
Treat symptomatically
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Carbon dioxide (CO₂). Dry chemical. Chemical foam.
No information available
Fine dust dispersed in air may ignite.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
See Section 12 for additional Ecological Information.
Sweep up and shovel into suitable containers for disposal.
Materials: suitable containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe dust. Do not get in eyes, on skin, or on clothing. Do not ingest. If swallowed then seek immediate medical assistance.
Keep in a dry, cool and well-ventilated place. Refer product specification and/or product label for specific storage temperature requirement. Keep container tightly closed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas.
Wear appropriate protective gloves
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Wear appropriate protective gloves and clothing to prevent skin exposure.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known, based on information available
None under normal processing.
To avoid thermal decomposition, do not overheat. Incompatible products.
Strong oxidizing agents, Strong bases, Strong reducing agents
Nitrogen oxides (NOx), Carbon monoxide (CO), Carbon dioxide (CO₂), Ammonia, Hydrogen chloride gas
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Persistence and Degradability
Soluble in water Persistence is unlikely based on information available.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Bioaccumulation/ Accumulation
No information available.
12.1 Toxicity
12.4 Mobility in soil
The substance is expected to be mobile in the environment due to its water solubility.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2811
- Shipping Name
- TOXIC SOLID, ORGANIC, N.O.S.
- Transport Class
- 6.1
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is 2-Chloroacetamide known by?
2-Chloroacetamide is also known as: Chloroacetamide; alpha-Chloroacetamide; 2-Chloroethanamide.
What is the hazard signal word for 2-Chloroacetamide?
The signal word is danger.
What is the physical form of 2-Chloroacetamide?
2-Chloroacetamide is a powder solid appearing as white . It has odorless odor.
What is the solubility of 2-Chloroacetamide?
No information available
What is 2-Chloroacetamide used for?
Laboratory chemicals.
What are the hazard statements for 2-Chloroacetamide?
This substance has 4 hazard statements:
- H301: Toxic if swallowed
- H317: May cause an allergic skin reaction
- H361f: Suspected of damaging fertility
- May form combustible dust concentrations in air
What is the melting point of 2-Chloroacetamide?
The melting point is 116 - 120 °C / 240.8 - 248 °F and the boiling point is 224.5 °C / 436.1 °F @ 760 mmHg.