Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 2-Mercaptoethanol
- Product Code
- 1610710, 1610710EDU, 1610710XTU
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals
Manufacturers & Suppliers
Bio-Rad Laboratories Inc.
manufacturer
1000 Alfred Nobel Drive, Hercules, CA 94547, USA
Bio-Rad Laboratories, Life Science Group
manufacturer
2000 Alfred Nobel Drive, Hercules, California 94547, USA
Bio-Rad Laboratories
manufacturer
2000 Alfred Nobel Drive, Hercules, California 94547
1-800-424-6723
Emergency Contacts
CHEMTREC USA
1 (800) 424-9300
24 Hour
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-Mercaptoethanol | 60-24-2 | 50 - 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Get medical attention immediately if symptoms occur. If breathing has stopped, give artificial respiration. Get medical attention immediately. Immediate medical attention is required. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. If breathing is difficult, (trained personnel should) give oxygen.
Symptoms: Coughing and/ or wheezing. Difficulty in breathing.
Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Get immediate medical advice/attention.
Symptoms: May cause an allergic skin reaction.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Do not rub affected area. Remove contact lenses, if present and easy to do. Continue rinsing. Get immediate medical advice/attention.
Rinse mouth. Never give anything by mouth to an unconscious person. Get immediate medical advice/attention.
Immediate Medical Attention
Immediate medical attention is required.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical. Carbon dioxide (CO2). Water spray. Alcohol resistant foam.
Keep product and empty container away from heat and sources of ignition. In the event of fire, cool tanks with water spray. Product is or contains a sensitizer. May cause sensitization by skin contact.
In the event of fire, cool tanks with water spray.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Do not touch or walk through spilled material. Keep people away from and upwind of spill/leak.
Take precautionary measures against static discharges. Dam up. Soak up with inert absorbent material. Pick up and transfer to properly labeled containers.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use personal protection equipment. Do not breathe vapor or mist. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharges. Avoid contact with skin, eyes or clothing. Take off contaminated clothing and wash before reuse. In case of insufficient ventilation, wear suitable respiratory equipment.
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat, sparks, flame and other sources of ignition (i.e., pilot lights, electric motors and static electricity). Keep in properly labeled containers. Store in accordance with the particular national regulations. Store in accordance with local regulations. Keep out of the reach of children. Store locked up. Store according to product and label instructions.
Handle in accordance with good industrial hygiene and safety practice. Do not eat, drink or smoke when using this product.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Showers Eyewash stations Ventilation systems.
Wear suitable gloves. Impervious gloves.
Tight sealing safety goggles.
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.
Wear suitable protective clothing. Long sleeved clothing. Impervious clothing. Chemical resistant apron.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No information available.
None under normal processing.
Heat, flames and sparks. Excessive heat.
Strong acids. Strong bases. Strong oxidizing agents.
None known based on information supplied.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Ecotoxicity
Toxic to aquatic life with long lasting effects.
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.3 Bioaccumulative potential
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2966
- Shipping Name
- THIOGLYCOL
- Transport Class
- 6.1
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Contact supplier for inventory compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 2-Mercaptoethanol?
The signal word is danger.
What is the physical form of 2-Mercaptoethanol?
2-Mercaptoethanol is a liquid appearing as liquid with light yellow color. It has sulfurous odor.
What is 2-Mercaptoethanol used for?
Laboratory chemicals
What are the hazard statements for 2-Mercaptoethanol?
This substance has 8 hazard statements:
- H227: Combustible liquid
- H301: Toxic if swallowed
- H310: Fatal in contact with skin
- H315: Causes skin irritation
- H317: May cause an allergic skin reaction
- H318: Causes serious eye damage
- H331: Toxic if inhaled
- H372: May cause damage to organs through prolonged or repeated exposure
What is the melting point of 2-Mercaptoethanol?
The melting point is -100 °C / -148 °F and the boiling point is 158 °C / 316.4 °F.