Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- AQUAMET M
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For industrial use only.
Manufacturers & Suppliers
Nouryon Surface Chemistry AB
manufacturer
Stenunge Alle 3, Stenungsund 444 85, SE
+4630385000
Emergency Contacts
Kemiakuten
020 99 60 00
Emergency Contact
+31 57 06 79 211
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium dimethyldithiocarbamate | 128-04-1 | 40 - 50% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathed in, move person into fresh air. Consult a physician after significant exposure.
Take off contaminated clothing and shoes immediately. Rinse immediately with plenty of water.
Rinse with plenty of water. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. Obtain medical attention.
Symptoms: Causes serious eye irritation.
Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Obtain medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Do not allow run-off from fire fighting to enter drains or water courses.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Only qualified personnel equipped with suitable protective equipment may intervene. Prevent unauthorized persons entering the zone.
Do not flush into surface water or sanitary sewer system. Discharge into the environment must be avoided.
Contain spillage, soak up with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and transfer to a container for disposal according to local / national regulations (see section 13). Keep in suitable, closed containers for disposal. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal.
Materials: sand, earth, diatomaceous earth, vermiculite, sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, eyes and clothing. Smoking, eating and drinking should be prohibited in the application area. For personal protection see section 8.
Keep container tightly closed in a dry and well-ventilated place. Do not freeze. Do not store near acids.
Smoking, eating and drinking should be prohibited in the application area.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Stable under normal conditions.
Exothermic reaction with strong acids.
Extremes of temperature and direct sunlight.
Reacts with copper, aluminum, zinc and their alloys, Oxidizing agents, Acids
Sulphur dioxide, Hydrogen sulfide, Carbon disulphide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Toxicity
Elimination information (persistence and degradability)
Bioaccumulative potential
Mobility in soil
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container in accordance with local regulation.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Sodium dimethyldithiocarbamate)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for AQUAMET M?
The signal word is warning.
What is the physical form of AQUAMET M?
AQUAMET M is a liquid appearing as liquid, yellow green with yellow green color. It has sulfurous odor.
What is AQUAMET M used for?
For industrial use only.
What are the hazard statements for AQUAMET M?
This substance has 2 hazard statements:
- H319: Causes serious eye irritation.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of AQUAMET M?
The melting point is 0 °C and the boiling point is > 100 °C.