Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- COLORMATIC 1K FILLER BEIGE 400 ML
- Product Code
- 856556
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
MOTIP DUPLI B.V.
manufacturer
Wolfraamweg 2, NL-8471 XC Wolvega, The Netherlands
+31 (0)561 694400
Emergency Contacts
Emergency Contact
+31 (0)561-694400
09:00h - 17:00h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| acetone EC: 200-662-2 | 67-64-1 | 20 - 25% | Yes |
| n-butyl acetate EC: 204-658-1 | 123-86-4 | 12.5 - 20% | Yes |
| dimethyl ether EC: 204-065-8 | 115-10-6 | 12.5 - 20% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 5 - 10% | Yes |
| butane EC: 203-448-7 | 106-97-8 | 2.5 - 5% | Yes |
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 2.5 - 5% | Yes |
| isobutane EC: 200-857-2 | 75-28-5 | 2.5 - 5% | Yes |
| cellulose nitrate | 9004-70-0 | 2.5 - 5% | Yes |
| butan-1-ol EC: 200-751-6 | 71-36-3 | 2.5% | Yes |
| propan-2-ol EC: 200-661-7 | 67-63-0 | 2.5% | Yes |
| trizinc bis(orthophosphate) EC: 231-944-3 | 7779-90-0 | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Immediate Medical Attention
Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
During heating or in case of fire poisonous gases are produced.
Firefighter Protection
Mouth respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Keep away from ignition sources. Mount respiratory protective device. Wear protective equipment. Keep unprotected persons away.
Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
Related Products
Similar products with comparable safety profiles
COLORMATIC 1K SPRAY PUTTY 400 ML
---
COLORMATIC PRE-FILL STANDARD 275 ML
---
COLORMATIC PRE-FILL STANDARD 275 ML
---
COLORMATIC PRE-FILL CONVERTER 2 325 ML
---
COLORMATIC PRE-FILL STANDARD 112,5 ML
---
Aerosol 2K Fill In + 100ml 2K Epoxy Primer beige
---
Aerosol 2K Fill In + 100ml Lack 2K BHS CAT BLACK
---
COLORMARK LINEMARKER WHITE 500 ML
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Keep respiratory protective device available. Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50°C, i.e. electric lights. Do not pierce or burn, even after use.
Keep container tightly sealed. Observe official regulations on storing packagings with pressurised containers.
Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.1 Toxicity
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- not regulated
Warning: Gases.
Warning: Gases. Stowage Code: SW1 Protected from sources of heat. SW22 For AEROSOLS with a maximum capacity of 1 litre: Category A. For AEROSOLS with a capacity above 1 litre: Category B. For WASTE AEROSOLS: Category C, Clear of living quarters. Segregation Code: SG69 For AEROSOLS with a maximum capacity of 1 litre: Segregation as for class 9. Stow "separated from" class 1 except for division 1.4. For AEROSOLS with a capacity above 1 litre: Segregation as for the appropriate subdivision of class 2. For WASTE AEROSOLS: Segregation as for the appropriate subdivision of class 2.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for COLORMATIC 1K FILLER BEIGE 400 ML?
The signal word is danger.
What is the physical form of COLORMATIC 1K FILLER BEIGE 400 ML?
COLORMATIC 1K FILLER BEIGE 400 ML is a aerosol with beige color. It has solvent-like odor.
What are the hazard statements for COLORMATIC 1K FILLER BEIGE 400 ML?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of COLORMATIC 1K FILLER BEIGE 400 ML?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..