Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Potassium chloride 3 mol/l (3 N) in aqueous solution AVS TITRINORM® electrolytic solution
- Product Code
- 83605
Regulatory Identifiers
- CAS Number
- 7447-40-7 Check regulations →
Identified Uses
General chemical reagent
Uses advised against
The product, as such or as a component of a mixture, is not intended to be used by consumers (as defined by the REACH Regulation).
Manufacturers & Suppliers
VWR International GmbH
national supplier
Hilpertstraße 20a, 64295 Darmstadt, Deutschland
0800-702 00 07
Emergency Contacts
CareChem24
+44 (0) 1270 502894
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS07
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This mixture does not contain any substances presenting a health or environmental hazard within the meaning of the Dangerous Substances Directive 67/548/EEC or Regulation (EC) No. 1272/2008, assigned a Community workplace exposure limit, classified as PBT/vPvB or included in the Candidate List.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. Obtain medical attention if symptoms appear.
Gently wash with plenty of soap and water. In case of skin reactions, consult a physician.
Rinse immediately carefully and thoroughly with eye-bath or water. Obtain medical attention if symptoms appear.
Rinse mouth thoroughly with water. Call a doctor if you feel unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The product itself does not burn. Co-ordinate fire-fighting measures to the fire surroundings. Water. Foam. Alcohol resistant foam. Dry extinguishing powder.
Full water jet.
In case of fire may be liberated: Hydrogen chloride (HCl)
Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
Do not breathe gas/fumes/vapour/spray.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove victim out of the danger area. First Aid, decontamination, treatment of symptoms.
No special environmental measures are necessary.
Take up mechanically, placing in appropriate containers for disposal.
Related Products
Similar products with comparable safety profiles
Potassium chloride solution 3 mol/l
---
Potassium chloride 3 mol/l
CAS: 7447-40-7
Potassium chloride 3 mol/l
CAS: 7447-40-7
Potassium chloride solution
---
Potassium Chloride 3 M
CAS: 7447-40-7
Electrolyte KCl 3 mol/l AgCl saturated (9811)
---
Potassium chloride
CAS: 7447-40-7
Potassium chloride
CAS: 7447-40-7
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke. Provide eye shower and label its location conspicuously.
Keep container tightly closed and in a well-ventilated place.
Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke.
No special measures are necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,12 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-0998
Eye glasses with side protection DIN-/EN-Norms EN 166. Recommendation: VWR 111-0432
Usually no personal respirative protection necessary.
Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
This material is non-reactive under normal conditions.
No further relevant information available.
No further relevant information available.
No further relevant information available.
No known hazardous decomposition products. Decomposition products in case of fire: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil:
12.5 Results of PBT/vPvB assessment
The substances in the mixture do not meet the PBT/vPvB criteria according to REACH, annex XIII.
12.6 Endocrine disrupting properties
The product does not contain any substances identified as having endocrine disrupting properties with respect to the environment.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal. The waste is to be kept separate from other types of waste until its disposal.
Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Potassium chloride 3 mol/l (3 N) in aqueous solution AVS TITRINORM® electrolytic solution?
The signal word is no signal word.
What is the physical form of Potassium chloride 3 mol/l (3 N) in aqueous solution AVS TITRINORM® electrolytic solution?
Potassium chloride 3 mol/l (3 N) in aqueous solution AVS TITRINORM® electrolytic solution is a liquid with colourless color. It has no data available odor.
What is Potassium chloride 3 mol/l (3 N) in aqueous solution AVS TITRINORM® electrolytic solution used for?
General chemical reagent
What is the melting point of Potassium chloride 3 mol/l (3 N) in aqueous solution AVS TITRINORM® electrolytic solution?
The melting point is no data available and the boiling point is ~ 100°C.