Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- VWR Int Buffer Solution pH 4.00 (20C) AVS TITRINORM
- Synonyms
- Buffer Solution pH 4.00 (20C) (Potassium hydrogen phthalate) +/- 0.02 pH units AVS TITRINORM
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Use according to manufacturer's directions. For laboratory use and chemical production.
Manufacturers & Suppliers
Bio-Strategy Pty Ltd
national supplier
Unit 1A/60 Enterprise Place QLD 4173 Australia
1300 727 696
http://www.bio-strategy.com.au
Emergency Contacts
Emergency Contact
07 3009 4188
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| potassium hydrogen phthalate | 877-24-7 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If fumes or combustion products are inhaled remove from contaminated area. Lay patient down. Keep warm and rested. Prostheses such as false teeth, which may block airway, should be removed, where possible, prior to initiating first aid procedures. Apply artificial respiration if not breathing, preferably with a demand valve resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if necessary. Transport to hospital, or doctor, without delay.
Immediately remove all contaminated clothing, including footwear. Flush skin and hair with running water (and soap if available). Seek medical attention in event of irritation.
Wash out immediately with fresh running water. Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids. Seek medical attention without delay; if pain persists or recurs seek medical attention. Removal of contact lenses after an eye injury should only be undertaken by skilled personnel.
If swallowed do NOT induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain open airway and prevent aspiration. Observe the patient carefully. Never give liquid to a person showing signs of being sleepy or with reduced awareness; i.e. becoming unconscious. Give water to rinse out mouth, then provide liquid slowly and as much as casualty can comfortably drink. Seek medical advice.
Immediate Medical Attention
Seek medical attention without delay; if pain persists or recurs seek medical attention. Transport to hospital, or doctor, without delay.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
There is no restriction on the type of extinguisher which may be used. Use extinguishing media suitable for surrounding area.
Non combustible. Not considered a significant fire risk, however containers may burn. May emit poisonous fumes. May emit corrosive fumes.
Alert Fire Brigade and tell them location and nature of hazard. Prevent, by any means available, spillage from entering drains or water courses. Use fire fighting procedures suitable for surrounding area.
Firefighter Protection
Wear breathing apparatus plus protective gloves in the event of a fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Clear area of personnel and move upwind. Alert Fire Brigade and tell them location and nature of hazard.
Clean up all spills immediately. Avoid breathing vapours and contact with skin and eyes. Control personal contact with the substance, by using protective equipment. Contain and absorb spill with sand, earth, inert material or vermiculite.
Moderate hazard. Clear area of personnel and move upwind. Alert Fire Brigade and tell them location and nature of hazard. Wear breathing apparatus plus protective gloves.
Clean up all spills immediately. Contain and absorb spill with sand, earth, inert material or vermiculite.
Materials: sand, earth, inert material or vermiculite
Related Products
Similar products with comparable safety profiles
VWR INT BUFFER SOLUTION PH 4.00 (20C) AVS TITRINORM
---
Buffer solution pH 4 red coloured AVS TITRINORM® (Reagent traceable to SRM from NIST)
---
VWR Int Sodium Hydroxide 0.1 mol/l (0.1N) AVS TITRINORM
---
Buffer solution (borate buffer) pH 9 (20°C), blue coloured ± 0.02 pH-units AVS TITRINORM®
CAS: 00-00-0
Buffer solution (phthalate phosphate buffer) pH 7.00 (20°C), green coloured ± 0.02 pH-units AVS TITRINORM®
CAS: 00-00-0
Buffer Solution pH 7 Green Coloured AVS TITRINORM® (Reagent traceable to SRM from NIST)
---
pH 4.01 Buffer Solution
---
pH 4.01 Buffer Solution
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid all personal contact, including inhalation. Wear protective clothing when risk of exposure occurs. Use in a well-ventilated area. Avoid contact with moisture. DO NOT allow clothing wet with material to stay in contact with skin
Store in original containers. Keep containers securely sealed. Store in a cool, dry, well-ventilated area. Store away from incompatible materials and foodstuff containers.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
▶ Unstable in the presence of incompatible materials. ▶ Product is considered stable. ▶ Hazardous polymerisation will not occur.
See section 7
See section 7
See section 7
See section 7
See section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Toxicity
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Results of PBT and vPvB assessment
Endocrine disrupting properties
Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Legislation addressing waste disposal requirements may differ by country, state and/or territory. Each user must refer to laws operating in their area. In some areas, certain wastes must be tracked. A Hierarchy of Controls seems to be common - the user should investigate: Reduction, Reuse, Recycling, Disposal (if all else fails). Recycle wherever possible. Consult manufacturer for recycling options or consult local or regional waste management authority for disposal if no suitable treatment or disposal facility can be identified. Dispose of by: burial in a land-fill specifically licensed to accept chemical and / or pharmaceutical wastes or incineration in a licensed apparatus (after admixture with suitable combustible material).
This material may be recycled if unused, or if it has not been contaminated so as to make it unsuitable for its intended use.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
POTASSIUM HYDROGEN PHTHALATE(877-24-7) IS FOUND ON THE FOLLOWING REGULATORY LISTS
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is VWR Int Buffer Solution pH 4.00 (20C) AVS TITRINORM known by?
VWR Int Buffer Solution pH 4.00 (20C) AVS TITRINORM is also known as: Buffer Solution pH 4.00 (20C) (Potassium hydrogen phthalate) +/- 0.02 pH units AVS TITRINORM
What is the hazard signal word for VWR Int Buffer Solution pH 4.00 (20C) AVS TITRINORM?
The signal word is warning.
What is the physical form of VWR Int Buffer Solution pH 4.00 (20C) AVS TITRINORM?
VWR Int Buffer Solution pH 4.00 (20C) AVS TITRINORM is a liquid appearing as liquid . It has not available odor.
What is VWR Int Buffer Solution pH 4.00 (20C) AVS TITRINORM used for?
Use according to manufacturer's directions. For laboratory use and chemical production.
What are the hazard statements for VWR Int Buffer Solution pH 4.00 (20C) AVS TITRINORM?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
What is the melting point of VWR Int Buffer Solution pH 4.00 (20C) AVS TITRINORM?
The melting point is Not Available and the boiling point is Not Available.