Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Buffer solution pH 4 red coloured AVS TITRINORM® (Reagent traceable to SRM from NIST)
- Product Code
- 32044
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- This product is a mixture. See section 3 for EU REACH registration numbers when applicable.
Identified Uses
General chemical reagent
Manufacturers & Suppliers
VWR International Ltd.
distributor
Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN
0800 22 33 44
Emergency Contacts
CareChem24
+44 (0) 1270 502894
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium azide EC: 247-852-1 | 26628-22-8 | 0.01% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration. In case of respiratory tract irritation, consult a physician.
After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. In case of skin reactions, consult a physician.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.
If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Do NOT induce vomiting. Give nothing to eat or drink.
Immediate Medical Attention
Obtain immediate medical attention if accidentally swallowed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The product itself does not burn. Co-ordinate fire-fighting measures to the fire surroundings.
no restriction
In case of fire may be liberated: Pyrolysis products, toxic
Use water spray jet to protect personnel and to cool endangered containers.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
In case of major fire and large quantities: Remove persons to safety.
In case of major fire and large quantities: Remove persons to safety.
Discharge into the environment must be avoided.
Collect in closed and suitable containers for disposal.
Related Products
Similar products with comparable safety profiles
Buffer Solution pH 7 Green Coloured AVS TITRINORM® (Reagent traceable to SRM from NIST)
---
Buffer solution (borate buffer) pH 9 (20°C), blue coloured ± 0.02 pH-units AVS TITRINORM®
CAS: 00-00-0
Buffer solution (citric acid/sodium hydroxide/hydrogen chloride) colour: red traceable to SRM from NIST and PTB pH 4.00 (20 °C) Certipur®
---
Buffer Solution, pH 4.00, Color-Coded Red
---
VWR INT BUFFER SOLUTION PH 4.00 (20C) AVS TITRINORM
---
Buffer solution pH 4.01
---
Buffer solution pH 4 (phthalate) Traceable to NIST
---
Buffer solution pH 4.01 (9863)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
All work processes must always be designed so that the following is as low as possible: Inhalation, skin contact, Eye contact. Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke.
Keep container tightly closed and in a well-ventilated place.
Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,12 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-0998. By long-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,38 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-3717 / 112-1381.
Eye glasses with side protection DIN-/EN-Norms DIN EN 166. Recommendation: VWR 111-0432
Usually no personal respirative protection necessary.
Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.
no data available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
no data available
no data available
no data available
no data available
no data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Buffer solution pH 4 red coloured AVS TITRINORM® (Reagent traceable to SRM from NIST)?
The signal word is no signal word.
What is the physical form of Buffer solution pH 4 red coloured AVS TITRINORM® (Reagent traceable to SRM from NIST)?
Buffer solution pH 4 red coloured AVS TITRINORM® (Reagent traceable to SRM from NIST) is a liquid appearing as red coloured with red coloured color. It has no data available odor.
What is Buffer solution pH 4 red coloured AVS TITRINORM® (Reagent traceable to SRM from NIST) used for?
General chemical reagent
What is the melting point of Buffer solution pH 4 red coloured AVS TITRINORM® (Reagent traceable to SRM from NIST)?
The melting point is no data available and the boiling point is no data available.