Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Naphthol AS-BI β-D-glucuronide
- Product Code
- N1875
Regulatory Identifiers
- CAS Number
- 37-87-6 Check regulations →
Identified Uses
Laboratory chemicals, Synthesis of substances
Uses advised against
The product is being supplied under the TSCA R&D Exemption (40 CFR Section 720.36). It is the recipient's responsibility to comply with the requirements of the R&D exemption. The product may not be used for a non-exempt commercial purpose under TSCA unless appropriate consent is granted in writing by MilliporeSigma.
Manufacturers & Suppliers
Sigma-Aldrich Inc.
manufacturer
3050 SPRUCE ST, ST. LOUIS MO 63103, UNITED STATES
+1 314 771-5765
Emergency Contacts
CHEMTREC
800-424-9300
24 Hours/day; 7 Days/week
CHEMTREC
+1-703-527-3887
24 Hours/day; 7 Days/week
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
No hazardous ingredients according to the OSHA Hazard Communication Standard 29CFR 19101200.
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.
After eye contact: rinse out with plenty of water. Remove contact lenses.
After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
For this substance/mixture no limitations of extinguishing agents are given.
Suppress (knock down) gases/vapors/mists with a water spray jet.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up dry. Clean up affected area.
Related Products
Similar products with comparable safety profiles
Naphthol As-bi N-acetyl-β-d-glucosaminide
CAS: 3395-37-7
Naphthol AS-D acetate
CAS: 528-66-5
2-Naphthol
CAS: 135-19-3
N,N'-Diacetylbenzidine
CAS: 613-35-4
1-Naphthylacetic acid
CAS: 86-87-3
β-Glucan Assay Kit
---
Hydroxy naphthol blue disodium salt
CAS: 165660-27-5
3-Hydroxy-2-naphthoic acid, 98%
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For precautions see section 2.2.
Tightly closed. Dry.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No data available
Material: Nitrile rubber Break through time: 480 min Glove thickness: 0.11 mm Protective index: Full contact Manufacturer: KCL 741 Dermatril® L Material: Nitrile rubber Break through time: 480 min Glove thickness: 0.11 mm Protective index: Splash contact Manufacturer: KCL 741 Dermatril® L Remarks: Handle with impervious gloves. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P1. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
No data available
No data available
no information available
No data available
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Ecotoxicity
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Results of PBT and vPvB assessment
Endocrine disrupting properties
Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste material must be disposed of in accordance with the national and local regulations. Leave chemicals in original containers. No mixing with other waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Product contains substance(s) not listed on TSCA inventory.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Naphthol AS-BI β-D-glucuronide?
The signal word is no signal word.
What is the physical form of Naphthol AS-BI β-D-glucuronide?
Naphthol AS-BI β-D-glucuronide is a solid appearing as powder with white color.
What is Naphthol AS-BI β-D-glucuronide used for?
Laboratory chemicals, Synthesis of substances
What are the hazard statements for Naphthol AS-BI β-D-glucuronide?
This substance has 1 hazard statement:
- Not a hazardous substance or mixture.