Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 5-Methyl-5-phenylimidazolidine-2,4-dione
- Product Code
- BD11793
- Chemical Name
- 5-Methyl-5-phenylimidazolidine-2,4-dione
Regulatory Identifiers
- CAS Number
- 6843-49-8 Check regulations →
Identified Uses
For laboratory research purposes.
Uses advised against
Not for drug or household use.
Manufacturers & Suppliers
Not specified
manufacturer
488 Taoqiao Road, Building 6,1F, HuiNan Town, Pudong New Area, Shanghai 201399, China
86-21-61629022
Emergency Contacts
Emergency Contact
1-352-323-3500
Emergency Contact
400 120 0761
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 5-Methyl-5-phenylimidazolidine-2,4-dione | 6843-49-8 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. Continue rinsing eyes during transport to hospital.
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Immediate Medical Attention
Take victim immediately to hospital.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol-resistant foam, dry chemical or carbon dioxide
no data
In combustion toxic fumes may form.
Firefighter Protection
Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear respiratory protection. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. Do not attempt to take action without suitable protective clothing.
Prevent further leakage or spillage if safe to do so. Do not let product enter drains or river. Alert the neighbourhood to the presence of fumes or gas.
Sweep up and shovel. Transfer to a closable, labelled salvage container for disposal by an appropriate method.
Materials: sand or vermiculite
Related Products
Similar products with comparable safety profiles
3-Methyl-1-phenyl-2-pyrazolin-5-one
CAS: 89-25-8
5-Methylpiperidin-2-one
CAS: 3298-16-6
5-[2-(dimethylamino)ethyl]-1,3,4-thiadiazol-2-amine
---
4,5-dimethyl-2,4-dihydro-3H-pyrazol-3-one
---
N5-(3-(7H-purin-6-yl)pyridin-2-yl)-N1-(4-chlorophenyl)-6-methylisoquinoline-1,5-diamine
CAS: 1093100-40-3
2-amino-N-[2-(2,3-dihydro-1,4-benzodioxin-6-yl)imidazo[1,2-a]pyridin-6-yl]acetamide
CAS: 1181319-27-6
5-Ethyl-2-methylpyridine
---
2-Methylaziridine
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling.
Keep container tightly closed in a dry and well-ventilated area. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Inert atmosphere, 2-8°C
Wash hands thoroughly after handling.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Handle in accordance with good industrial hygiene and safety practice.
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Face shield and safety glasses. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Where risk assessment shows air-purifying respirators are appropriate. Use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Complete suit protecting against chemicals. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No data available
No data available
No data available
Strong oxidizing agents
Carbon monoxide, carbon dioxide, nitrogen oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.6 Other adverse effects
No data available
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Hand over to authorised disposal company as hazardous waste.
Hand over to authorised disposal company as hazardous waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Product is not subject to any additional regulations or provisions
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 5-Methyl-5-phenylimidazolidine-2,4-dione?
The signal word is warning.
What is the physical form of 5-Methyl-5-phenylimidazolidine-2,4-dione?
5-Methyl-5-phenylimidazolidine-2,4-dione is a powder or crystals appearing as white to yellow powder or crystals with white to yellow color. It has no data available odor.
What is 5-Methyl-5-phenylimidazolidine-2,4-dione used for?
For laboratory research purposes.
What are the hazard statements for 5-Methyl-5-phenylimidazolidine-2,4-dione?
This substance has 2 hazard statements:
- H302: Harmful if swallowed
- H319: Causes serious eye irritation
What is the melting point of 5-Methyl-5-phenylimidazolidine-2,4-dione?
The melting point is No data available and the boiling point is No data available.