Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Polyethylene glycol 6000 for synthesis
- Product Code
- 8.07491, 807491
- Chemical Name
- Polyethylene glycol 6000
Regulatory Identifiers
- CAS Number
- 25322-68-3 Check regulations →
Identified Uses
Chemical for synthesis
Manufacturers & Suppliers
Merck Life Science (Pty) Ltd.
manufacturer
1 Friesland Drive, Longmeadow Business Estate, MODDERFONTEIN, 1609, SOUTH AFRICA
+27 +27 (0) 8600 63725
Emergency Contacts
Emergency Contact
0-800-983-611
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
No hazardous ingredients
First Aid Measures
Emergency procedures for chemical exposure incidents
Fresh air.
Take off immediately all contaminated clothing. Rinse skin with water/ shower.
Rinse out with plenty of water. Remove contact lenses.
Make victim drink water (two glasses at most). Consult doctor if feeling unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, Foam, Carbon dioxide (CO2), Dry powder
For this substance/mixture no limitations of extinguishing agents are given.
Combustible. Development of hazardous combustion gases or vapours possible in the event of fire.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up dry. Dispose of properly. Clean up affected area.
Related Products
Similar products with comparable safety profiles
Polyethylene glycol 6000 for synthesis
---
Polyethylene glycol 1000 for synthesis
CAS: 25322-68-3
Polyethylene glycol 20000 (stabilised) for synthesis
CAS: 25322-68-3
Polyethylene glycol 400
CAS: 25322-68-3
Polyethylene glycol 400
CAS: 25322-68-3
Triethylene glycol for synthesis
CAS: 112-27-6
Diethylene glycol diethyl ether for synthesis
CAS: 112-36-7
Poly(ethylene glycol)
CAS: 25322-68-3
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Change contaminated clothing. Wash hands after working with substance. For precautions see section 2 GHS label elements
Tightly closed. Dry.
Change contaminated clothing. Wash hands after working with substance.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material : Nitrile rubber, Break through time : 480 min, Glove thickness : 0,11 mm, Protective index : Full contact / Splash contact, Manufacturer : KCL 741 Dermatril® L. Remarks : This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter : Filter type P1 type: The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.
No data available
no information available
Strong oxidizing agents
For Hazardous combustion products in the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.6 Endocrine disrupting properties
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste material must be disposed of in accordance with the national and local regulations.
Leave chemicals in original containers. No mixing with other waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Polyethylene glycol 6000 for synthesis?
The signal word is no signal word.
What is the physical form of Polyethylene glycol 6000 for synthesis?
Polyethylene glycol 6000 for synthesis is a solid (20 °c, 1.013 hpa) with white color. It has no data available odor.
What is Polyethylene glycol 6000 for synthesis used for?
Chemical for synthesis
What is the melting point of Polyethylene glycol 6000 for synthesis?
The melting point is 55 - 61 °C and the boiling point is No data available.