Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Hematoxylin Powder
- Product Code
- 3803815
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Nuclear stain.
Uses advised against
All other uses.
Manufacturers & Suppliers
Leica Biosystems Richmond, Inc
manufacturer
5205 Route 12 Richmond, IL 60071
800-225-3035
Emergency Contacts
ChemTrec
1-800-424-9300
Emergency Contact
+1 703-527-3887
Australia 24 Hr Poisons Information Centre
13 11 26
Emergency Contact
1-800-225-3035
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
No ingredients are classified as hazardous.
First Aid Measures
Emergency procedures for chemical exposure incidents
Call medical doctor or poison control center immediately. Move exposed person to fresh air. If not breathing, if breathing is irregular, or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Loosen tight clothing, such as a collar, tie, belt, or waistband. Get medical attention if symptoms occur.
Symptoms: No known significant effects or critical hazards.
In case of contact, immediately flush skin with plenty of water for at least 20 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Clean shoes thoroughly after handling. Get medical attention if symptoms occur.
Symptoms: No known significant effects or critical hazards.
Check for and remove any contact lenses. Immediately flush eyes with plenty of water for at least 20 minutes, occasionally lifting upper and lower eyelids. Get medical attention if symptoms occur.
Symptoms: No known significant effects or critical hazards.
Wash out mouth with water. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention if symptoms occur.
Symptoms: No known significant effects or critical hazards.
Immediate Medical Attention
Call medical doctor or poison control center immediately.
Medical Treatment
No immediate treatment is normally required. No specific treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use dry chemical, alcohol foam, carbon dioxide (CO₂), or water spray.
None known.
Unusual fire and explosion hazards : None known.
Determine the need to evacuate or isolate the area according to your local emergency plan. Use water spray to keep fire exposed containers cool.
Firefighter Protection
Self-contained breathing apparatus and protective clothing should be worn in fighting large fires involving chemicals.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop spill at the source if it is safe to do so. Collect material in a manner that minimizes the generation of airborne dusts, and place in appropriate container for disposal.
Stop spill at the source if it is safe to do so. Collect material in a manner that minimizes the generation of airborne dusts, and place in appropriate container for disposal.
Prevent entry in storm sewers and waterways.
Collect material in a manner that minimizes the generation of airborne dusts, and place in appropriate container for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin, and clothing. Avoid breathing dusts. Use with adequate ventilation.
Store in a cool area. Keep containers closed when not in use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use with adequate local exhaust ventilation to maintain exposure levels below the occupational exposure limits.
Impervious gloves recommended (butyl rubber).
Wear safety glasses or chemical goggles.
None needed with adequate ventilation. If the occupational exposure limit is exceeded, use an approved organic vapor respirator. Selection of respiratory protection depends on the contaminant type, form, and concentration. Select in accordance with OSHA 1910.134 or other applicable regulations and good industrial hygiene practice.
Impervious clothing as needed to avoid skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Normally stable.
This material is not reactive under normal conditions.
Reaction with oxidizers may generate heat and cause fire.
Extreme heat. Darkens on exposure to light and air.
Oxidizing agents.
Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: oxides of carbon.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No data available.
12.2 Persistence and degradability
No data available.
12.3 Bioaccumulative potential
No data available.
12.4 Mobility in soil
12.5 Results of PVT and vPvB assessment
No data available.
12.6 Other adverse effects
No data available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The generation of waste should be avoided or minimized wherever possible. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.
Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Hematoxylin Powder?
The signal word is no signal word.
What is the physical form of Hematoxylin Powder?
Hematoxylin Powder is a solid appearing as light tan powder with light tan color. It has sweet odor.
What is the solubility of Hematoxylin Powder?
Moderately soluble in water
What is Hematoxylin Powder used for?
Nuclear stain.