NextSDS Logo
Safety Data Sheet EN

Osmium tetroxide, 2% solution in water

CAS 7732-18-5
EC 231-791-2

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Osmium tetroxide, 2% solution in water
Product Code
AGR1019, AGR1021, AGR1022

Regulatory Identifiers

CAS Number
7732-18-5 Check regulations →
EC Number
231-791-2 Check regulations →

Identified Uses

Fixative for electron microscope.

Manufacturers & Suppliers

A

Agar Scientific Ltd

manufacturer

Parsonage Lane, Stansted CM24 8GF, United Kingdom

+44 (0) 1279 813 519

Emergency Contacts

Emergency Contact

+44 (0)1856 407333

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 3 H301
Acute Tox. Cat. 3 H311
Acute Tox. Cat. 3 H331
Repr. Cat. 2 H361
Eye Dam. Cat. 1 H318
Skin Irrit. Cat. 2 H315

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS06 - Acute toxicity

GHS06

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H301 + H311 + H331 Toxic if swallowed, in contact with skin or if inhaled.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H361 Suspected of damaging fertility or the unborn child.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read carefully and follow all instructions.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P321 Specific treatment (see on this label).
P330 Rinse mouth.
P361 + P364 Take off immediately all contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Water EC: 231-791-2 7732-18-5 --- No
Sodium tetraoxide EC: 244-058-7 20816-12-0 2% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air or oxygen; call for doctor.

Symptoms: No adverse effects are anticipated from inhalation.

Skin contact

Wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Do not induce vomiting; call for medical help immediately.

Immediate Medical Attention

Do not induce vomiting; call for medical help immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use fire extinguishing methods suitable to surrounding conditions.

Specific hazards

No further relevant information available.

Firefighter Protection

Positive pressure self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Dilute with plenty of water.

Cleanup methods

Absorb with liquid-binding material

Materials: sand, diatomite, acid binders, universal binders, sawdust

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Open and handle receptacle with care.

Storage

Keep container tightly sealed.

Fire prevention

Extinguishing media: Water fog - dried resin only.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Eyes

Tightly sealed goggles

Respiratory

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Fluid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Fluid
Colour
According to product specification
Colour Intensity
---
Form
Fluid
Odor
Characteristic
Odor Threshold
Not determined.
Ph
Not determined.
Melting Point
0 °C
Boiling Point
100 °C
Flash Point
Not applicable.
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined.
Vapor Pressure
23 hPa
Vapor Density
Not determined.
Relative Density
Not determined.
Bulk Density
---
Density
4.9 g/cm³
Flammability
Not applicable.
Upper Explosive Limit
Not determined.
Lower Explosive Limit
Not determined.
Explosive Limits
---
Auto Ignition Temperature
Not determined.
Decomposition Temperature
Not determined.
Solubility
---
Partition Coefficient
Not determined.
Solubility In Water
Fully miscible.
Solubility In Fat
---
Molecular Weight
---
Voc Content
0.00 %
Metal Corrosion
---
Dynamic Viscosity
0.952 mPas
Kinematic Viscosity
Not determined.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used according to specifications.

Reactivity

No further relevant information available.

Hazardous reactions

No dangerous reactions known.

Avoid

No further relevant information available.

Incompatible

No further relevant information available.

Decomposition

No dangerous decomposition products known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Aquatic toxicity: No further relevant information available.

No further relevant information available.

12.2 Persistence and degradability

No further relevant information available.

No further relevant information available.

12.3 Bioaccumulative potential

No further relevant information available.

No further relevant information available.

12.4 Mobility in soil

No further relevant information available.

12.5 Results of PBT and vPvB assessment

PBT: Not applicable. vPvB: Not applicable.

The substance is not considered to be PBT or vPvB.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Disposal must be made according to official regulations.

Disposal

Must not be disposed together with household garbage.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3287
Shipping Name
TOXIC LIQUID, INORGANIC, N.O.S. (OSMIUM TETROXIDE)
Transport Class
6.1
Packing Group
II
ADR

Warning: Toxic substances.

IMDG

Warning: Toxic substances.

IATA

Warning: Toxic substances.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Osmium tetroxide, 2% solution in water?

The signal word is danger.

What is the physical form of Osmium tetroxide, 2% solution in water?

Osmium tetroxide, 2% solution in water is a fluid appearing as fluid with according to product specification color. It has characteristic odor.

What is Osmium tetroxide, 2% solution in water used for?

Fixative for electron microscope.

What are the hazard statements for Osmium tetroxide, 2% solution in water?

This substance has 4 hazard statements:

  • H301 + H311 + H331: Toxic if swallowed, in contact with skin or if inhaled.
  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.
  • H361: Suspected of damaging fertility or the unborn child.

What is the melting point of Osmium tetroxide, 2% solution in water?

The melting point is 0 °C and the boiling point is 100 °C.