Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sika Poxitar® F Part A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Corrosion protection
Manufacturers & Suppliers
Sika Deutschland GmbH
manufacturer
Kornwestheimer Str. 103-107 D-70439 Stuttgart
+49 711 8009 0
Emergency Contacts
GBK GmbH Global Regulatory Compliance
+49(0)6132-84463
24-Hour-Number
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C10-C13, aromatics, <1% naphthalene EC: 922-153-0 | 64742-94-5 | 5 - 10% | Yes |
| 2,2'-dimethyl-4,4'-methylenebis(cyclohexylamine) EC: 229-962-1 | 6864-37-5 | 5 - 10% | Yes |
| 2-phenylphenol (ISO) EC: 201-993-5 | 90-43-7 | 2.5 - 5% | Yes |
| Hydrocarbons, C9, aromatics EC: 918-668-5 | --- | 2.5 - 5% | Yes |
| (Z)-N-9-octadecenylpropane-1,3-diamine EC: 230-528-9 | 7173-62-8 | 1 - 2.5% | Yes |
| Anthracene oil; Anthracene oil EC: 292-602-7 | 90640-80-5 | 5 - 10% | Yes |
| xylene EC: 215-535-7 | 1330-20-7 | 1 - 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Consult a physician after significant exposure.
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Remove contact lenses. Keep eye wide open while rinsing.
Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness.
Do not induce vomiting without medical advice. Rinse mouth with water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
In case of fire, use water/water spray/water jet/carbon dioxide/sand/foam/alcohol resistant foam/chemical powder for extinction.
Do not allow run-off from fire fighting to enter drains or water courses.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Deny access to unprotected persons.
Do not flush into surface water or sanitary sewer system. If the product contaminates rivers and lakes or drains inform respective authorities.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid exceeding the given occupational exposure limits (see section 8). Do not get in eyes, on skin, or on clothing. Persons with a history of skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used. Smoking, eating and drinking should be prohibited in the application area. Follow standard hygiene measures when handling chemical products
Keep container tightly closed in a dry and well-ventilated place. Store in accordance with local regulations.
Handle in accordance with good industrial hygiene and safety practice. When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. This can be achieved by local exhaust extraction or by general ventilation. (EN 689 - Methods for determining inhalation exposure). This applies in particular to the mixing / stirring area.
Chemical-resistant, impervious gloves complying with an approved standard must be worn at all times when handling chemical products. Reference number EN 374. Follow manufacturer specifications. Suitable for short time use or protection against splashes: Butyl rubber/nitrile rubber gloves (0,4 mm) Contaminated gloves should be removed. Suitable for permanent exposure: Viton gloves (0.4 mm), breakthrough time >30 min.
Safety glasses with side-shields conforming to EN166. Eye wash bottle with pure water. Wear eye/face protection.
In case of inadequate ventilation wear respiratory protection. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. organic vapor (Type A) and particulate filter A1: < 1000 ppm; A2: < 5000 ppm; A3: < 10000 ppm P1: Inert material; P2, P3: hazardous substances. In case this is not sufficient to keep the concentrations under the occupational exposure limits then respiration protection measures must be used.
Protective clothing (e.g. Safety shoes acc. to EN ISO 20345, long-sleeved working clothing, long trousers). Rubber aprons and protective boots are additionally recommended for mixing and stirring work.
Do not flush into surface water or sanitary sewer system. If the product contaminates rivers and lakes or drains inform respective authorities.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
No dangerous reaction known under conditions of normal use.
Stable under recommended storage conditions.
No data available
No data available
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance/mixture contains components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB).
12.5 Results of PBT and vPvB assessment
The substance is assessed as both a PBT and vPvB substance.
12.6 Other adverse effects
An environmental hazard cannot be excluded in the event of unprofessional handling or disposal. Very toxic to aquatic life with long lasting effects.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
In accordance with the EWC Waste Regulation the classification of waste is to be assigned to the jurisdiction of the origin of waste.
It is not possible to assign a particular waste identification number.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1760
- Shipping Name
- CORROSIVE LIQUID, N.O.S.
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
All substances contained in our Products are registered by our upstream suppliers, and/or registered by us, and/or excluded from the regulation, and/or exempted from the registration.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sika Poxitar® F Part A?
The signal word is danger.
What is the physical form of Sika Poxitar® F Part A?
Sika Poxitar® F Part A is a liquid appearing as liquid with various color. It has slight odor.
What is Sika Poxitar® F Part A used for?
Corrosion protection
What are the hazard statements for Sika Poxitar® F Part A?
This substance has 5 hazard statements:
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
- H361fd: Suspected of damaging fertility. Suspected of damaging the unborn child.
- H373: May cause damage to organs through prolonged or repeated exposure if swallowed.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Sika Poxitar® F Part A?
The melting point is No data available and the boiling point is No data available.