Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SYNDUS SP 150
- Product Form
- Mixture
- Product Code
- 306191UO
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Professional use, Consumer use Lubricants and additives
Manufacturers & Suppliers
UNIL OPAL
manufacturer
ZI Clos Bonnet, Boulevard Jean Moulin, P.O. Box BP 88, 49403 SAUMUR Cedex
+33 (0)2.41.40.18.40
Emergency Contacts
National Poisons Information Service (Cardiff Centre) University Hospital Llandough
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated heavy paraffinic; Baseoil— unspecified; [A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil of at least 100 SUS at 100°F (19cSt at 40°C). It contains a relatively large proportion of saturated hydrocarbons.] (Note L) EC: 265-157-1 | 64742-54-7 | 25 - 50% | Yes |
| polysulfures, di-tert-butyl- EC: 956-717-2 | --- | 1% | Yes |
| Amines, C10-14-tert-alkyl EC: 701-175-2 | --- | 0.1% | Yes |
| C16-18-(even numbered, saturated and unsaturated)-alkylamines EC: 627-034-4 | 1213789-63-9 | 0.04% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Allow affected person to breathe fresh air. If symptoms persist, call a physician.
Symptoms: Symptoms may include dizziness, headache, nausea and loss of coordination.
Remove contaminated clothing. Wash with plenty of water/... Seek medical attention if ill effect or irritation develops.
Symptoms: Prolonged or repeated contact with the skin may cause dermatitis. Skin rash/inflammation. Redness. Itching.
Rinse immediately and thoroughly, pulling the eyelids well away from the eye (15 minutes minimum). Remove contact lenses, if present and easy to do. Continue rinsing. Contact ophthalmologist immediately.
Symptoms: May cause slight irritation. Redness. Pain.
If swallowed, rinse mouth with water (only if the person is conscious). Do NOT induce vomiting. Immediately call a POISON CENTER/doctor. Never give anything by mouth to an unconscious person.
Symptoms: Aspiration of this material may cause chemical pneumonia.
Immediate Medical Attention
Contact ophthalmologist immediately. Immediately call a POISON CENTER/doctor.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry powder. Foam. Sand. AFFF foam. Water spray. Carbon dioxide.
Do not use water jet.
On burning: release of harmful/irritant gases/vapours. Carbon oxides (CO, CO2).
Use water spray or fog for cooling exposed containers. Prevent fire fighting water from entering the environment. Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection. Self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Soak up with inert absorbent material (for example sand, sawdust, a universal binder, silica gel). Provide adequate ventilation. Ventilate area. Clean up any spills as soon as possible, using an absorbent material to collect it. Stop leak if safe to do so.
Avoid release to the environment.
Soak up with inert absorbent material (for example sand, sawdust, a universal binder, silica gel). Clean up any spills as soon as possible, using an absorbent material to collect it.
Materials: inert absorbent material (for example sand, sawdust, a universal binder, silica gel)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide good ventilation in process area to prevent formation of vapour. Keep away from sources of ignition - No smoking. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke in areas where product is used.
Keep away from sources of ignition - No smoking. Store in original container. Store in a dry, well ventilated place away from sources of heat, ignition and direct sunlight. Keep container tightly closed. Keep container closed when not in use.
Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this product. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Avoid contact with skin, eyes and clothing.
Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide local exhaust or general room ventilation to minimize mist and/or vapour concentrations.
Wear suitable gloves resistant to chemical penetration. Chemical resistant gloves (according to European standard NF ISO 374-1 or equivalent). Time of penetration is to be checked with the glove producer
Eye protection, including both chemical splash goggles and face shield, must be worn when possibility exists for eye contact due to spraying liquid or airborne particles
Avoid the formation of mists in the atmosphere. Where exposure through inhalation may occur from use, respiratory protection equipment is recommended. respirator with combination filter for vapour/particles
Wear suitable protective clothing. Separate working clothes from town clothes. Launder separately
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at ambient temperature and under normal conditions of use.
No additional information available
No additional information available
All heat sources, including direct sunlight. Sparks. Open flame.
Strong oxidizers. Strong acids. Strong bases.
No additional information available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.1. Toxicity
The substance is not classified for acute aquatic toxicity but is classified as harmful to aquatic life with long-lasting effects.
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
The substance is not rapidly degradable.
12.2. Persistence and degradability
12.2. Persistence and degradability
Not established.
12.2. Persistence and degradability
The substance is rapidly degradable.
12.2. Persistence and degradability
Not established.
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Endocrine disrupting properties
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not discharge into drains or the environment. Dispose in a safe manner in accordance with local/national regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Contains no substance(s) listed on REACH Annex XVII, REACH Annex XIV, REACH Candidate List, PIC list, POP list, Ozone Depletion list, dual-use items list, Explosives Precursors list, or Drug Precursors list.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SYNDUS SP 150?
The signal word is no signal word.
What is the physical form of SYNDUS SP 150?
SYNDUS SP 150 is a liquid with colourless. color. It has not available odor.
What is the solubility of SYNDUS SP 150?
Not available
What is SYNDUS SP 150 used for?
Professional use, Consumer use Lubricants and additives
What are the hazard statements for SYNDUS SP 150?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of SYNDUS SP 150?
The melting point is Not available and the boiling point is Not available.