NextSDS Logo
Safety Data Sheet EN

2-Methylpiperazine

CAS 109-07-9
EC 203-644-2

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
2-Methylpiperazine
Product Code
42786
Chemical Name
(+/-)-2-Methylpiperazine

Regulatory Identifiers

CAS Number
109-07-9 Check regulations →
EC Number
203-644-2 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

During normal business hours (Monday-Friday, 8am-7pm EST)

Carechem 24

(866) 928-0789

After normal business hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Sol. Cat. 2 H228
Skin Corr. Cat. 1B H314
Eye Dam. Cat. 1 H318

GHS Pictograms

GHS02 - Flammable

GHS02

GHS05 - Corrosive

GHS05

Hazard Statements

H228 Flammable solid.
H314 Causes severe skin burns and eye damage.
H318 Causes serious eye damage.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
(+/-)-2-Methylpiperazine EC: 203-644-2 109-07-9 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Symptoms: Causes severe skin burns.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms: Causes serious eye damage.

Ingestion

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR. Penetration time of glove material (in minutes) >480. Glove thickness 0.11 mm.

Eyes

Tightly sealed goggles. Full face protection.

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour Intensity
---
Relative Evaporation Rate
---
Form
---
Kinematic Viscosity
Not applicable.
Bulk Density
---
Vapor Pressure
Not applicable.
Colour
---
Flammability
Highly flammable.
Upper Explosive Limit
Not determined
Odor
Not determined
Solubility
Soluble
Voc Content
---
Auto Ignition Temperature
Not determined.
Solubility In Fat
---
Odor Threshold
Not determined.
Molecular Weight
---
Physical State Data
---
Lower Explosive Limit
Not determined
Relative Density
Not determined.
Properties Status
---
Solidification Point
---
Ph
Not applicable.
Flash Point
65 ℃ (149 ºF)
Freezing Point
---
State Under Standard Conditions
---
Vapor Density
Not applicable.
Partition Coefficient
Not determined.
Crystallisation Point
---
Cloud Point
---
Metal Corrosion
---
Softening Point
---
Decomposition Temperature
Not determined.
Solubility In Water
Soluble
Evaporation Rate
Not applicable.
Density
Not determined
Appearance
Crystalline powder
Explosive Limits
---
Physical State
---
Melting Point
62-66 ℃ (144-151 ºF)
Dynamic Viscosity
Not applicable.
Boiling Point
155-156 ℃ (311-313'ºF)
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN2925
Shipping Name
Flammable solids, corrosive, organic, n.o.s. ((+/-)-2-Methylpiperazine) FLAMMABLE SOLID, CORROSIVE, ORGANIC, N.O.S. ((+/-)-2-Methylpiperazine
Transport Class
4.1 Flammable solids, self-reactive substances and solid desensitised explosives.
Packing Group
III
IMDG

Warning: Flammable solids, self-reactive substances and solid desensitised explosives F-A,S-G

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 2-Methylpiperazine?

The signal word is danger.

What is the solubility of 2-Methylpiperazine?

Soluble

What is 2-Methylpiperazine used for?

SU24 Scientific research and development

What are the hazard statements for 2-Methylpiperazine?

This substance has 3 hazard statements:

  • H228: Flammable solid.
  • H314: Causes severe skin burns and eye damage.
  • H318: Causes serious eye damage.

What is the melting point of 2-Methylpiperazine?

The melting point is 62-66 ℃ (144-151 ºF) and the boiling point is 155-156 ℃ (311-313'ºF).

Compliance Scanner

Scan your compliance