Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Methane
- Product Code
- 20919
Regulatory Identifiers
- CAS Number
- 74-82-8 Check regulations →
- EC Number
- 200-812-7 Check regulations →
Identified Uses
SU24 Scientific research and development
Manufacturers & Suppliers
Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
www.alfa.com
Emergency Contacts
Emergency Contact
(800) 343-0660
Monday-Friday, 8am-7pm EST
Carechem 24
(866) 928-0789
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS04
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Methane EC: 200-812-7 | 74-82-8 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.
Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Seek medical treatment.
Immediate Medical Attention
Seek immediate medical advice.
Medical Treatment
Seek medical treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Stop flow of gas. Do not extinguish fire unless flow of gas can be stopped. Use water spray to keep container cool.
If this product is involved in a fire, the following can be released:
Firefighter Protection
Wear self-contained respirator. Wear fully protective impervious suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation.
Do not allow material to be released to the environment without proper governmental permits.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep container tightly sealed. Store in cool, dry place in tightly closed containers. Keep away from heat and direct sunlight. Ensure good ventilation at the workplace. Open and handle container with care.
Store in a cool location. Store in cool, dry conditions in well sealed containers. Keep container tightly sealed. Protect from heat and direct sunlight.
Protect against electrostatic charges. Keep ignition sources away.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer.
Use suitable respirator when high concentrations are present. Use suitable respiratory protective device in case of insufficient ventilation.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No information known.
Reacts with halogenated compounds, Reacts violently with interhalogens, Reacts with oxidizing agents, Reacts with oxygen.
No further relevant information available.
Oxidizing agents, Halogens, Interhalogens, Oxygen.
None known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Consult state, local or national regulations to ensure proper disposal.
Consult state, local or national regulations to ensure proper disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1971
- Shipping Name
- Methane, compressed
- Transport Class
- 2.1
- Packing Group
- Not applicable
Warning: Gases
Warning: Gases
Warning: Gases
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Methane?
The signal word is danger.
What is the physical form of Methane?
Methane is a gaseous appearing as colorless with colorless color. It has odorless odor.
What is Methane used for?
SU24 Scientific research and development
What are the hazard statements for Methane?
This substance has 2 hazard statements:
- H220: Extremely flammable gas.
- H280: Contains gas under pressure; may explode if heated.
What is the melting point of Methane?
The melting point is -182.48 °C (-296 °F) and the boiling point is -164 °C (-263 °F).