Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BIS SG CONTROL BS 5G*12 NLFR
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Colle
Manufacturers & Suppliers
UHU GmbH & Co.KG
manufacturer
Herrmannstraße 7, D-77815 Bühl (Baden)
0049-(0)7223-284-0
Bison International
distributor
Excelsiorlaan 27, B 3, B-1930 Zaventem
+32 3 710 92 92
Emergency Contacts
Centre Antipoisons
070 245245
Luxembourg
8002 - 5500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Colle
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-cyanoacrylate d'éthyle EC: 230-391-5 | 7085-85-0 | 50 - 100% | Yes |
Pour le libellé des phrases de risque citées, se référer au chapitre 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
En cas d'inconscience, coucher et transporter la personne en position latérale stable.
Laver immédiatement à l'eau et au savon et bien rincer.
Rincer les yeux, pendant plusieurs minutes, sous l'eau courante en écartant bien les paupières. Si les troubles persistent, consulter un médecin.
Si les troubles persistent, consulter un médecin.
Medical Treatment
Pas d'autres informations importantes disponibles.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Sans autre indication, voir point 7.
Le matériau des gants doit être imperméable et résistant au produit / à la substance / à la préparation. Choix du matériau des gants en fonction des temps de pénétration, du taux de perméabilité et de la dégradation. Épaisseur du matériau recommandée: > 0,12 mm. Nitrile gloves with a material thickness of > 0.1 mm (penetration time < 30s). Protective nitrile rubber gloves according to EN 374 are recommended for prolonged contact. Material thickness > 0.4 mm. Breakthrough time > 30 minutes. Caoutchouc nitrile. Pour le mélange des produits chimiques mentionnés ci-dessous, le temps de pénétration doit être d'au moins 10 minutes (perméabilité selon la norme EN 374 section 3: taux 1).
Lunettes de protection. Lunettes de protection hermétiques. Lunettes de protection recommandées pour le transvasement.
N'est pas nécessaire.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- l'ONU néant
- Transport Class
- néant
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BIS SG CONTROL BS 5G*12 NLFR?
The signal word is warning.
What is the physical form of BIS SG CONTROL BS 5G*12 NLFR?
BIS SG CONTROL BS 5G*12 NLFR is a liquide with selon désignation produit color. It has caractéristique odor.
What is the solubility of BIS SG CONTROL BS 5G*12 NLFR?
Pas ou peu miscible
What is BIS SG CONTROL BS 5G*12 NLFR used for?
Colle
What are the hazard statements for BIS SG CONTROL BS 5G*12 NLFR?
This substance has 3 hazard statements:
- H315: Provoque une irritation cutanée.
- H319: Provoque une sévère irritation des yeux.
- H335: Peut irriter les voies respiratoires.
What is the melting point of BIS SG CONTROL BS 5G*12 NLFR?
The melting point is Non déterminé. and the boiling point is 60 ℃.