NextSDS Logo
Safety Data Sheet NL

MOBIL 1 FS 0W-40

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MOBIL 1 FS 0W-40
Product Code
2015101010W6

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Motorolie

Uses advised against

Geen, tenzij elders in dit veiligheidsinformatieblad aangegeven.

Manufacturers & Suppliers

ExxonMobil Petroleum & Chemical BVBA logo

ExxonMobil Petroleum & Chemical BVBA

manufacturer

Polderdijkweg, B-2030 Antwerpen, België

+32 3 543 3111

www.msds.exxonmobil.com

Emergency Contacts

Antigifcentrum

+32 28 083 237 (CHEMTREC)

24 uur

Emergency Contact

070 245 245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Dit product is gedefinieerd als een mengsel.

Chemical Name CAS Number Concentration Hazardous
1-deceen, homopolymeer, gehydrogeneerd 1- deceen, oligomeren, gehydrogeneerd 68037-01-4 10 - 20% Yes
C14-16-18 alkylfenol EC: 931-468-2 --- 0.1 - 1% Yes
Destillaten, zwaar, C18-50 vertakt, cyclisch en lineair 848301-69-9 60 - 70% Yes
Zinkdithiofosfaat EC: 298-577-9 93819-94-4 0.1 - 1% Yes

Notes

Te rapporteren gevaarlijke stof(fen) in overeenstemming met de classificatiecriteria en/of met een grenswaarde voor blootstelling (OEL)

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Indien de ademhaling gestopt is, een beademingstoestel gebruiken of mond-op-mondbeademing toepassen.

Symptoms: Irritatie van de ademhalingswegen, duizeligheid, misselijkheid, bewusteloosheid.

Skin contact

De plaatsen waar de stof de huid geraakt heeft met zeep en water wassen. Injectie van het product in of onder de huid of in een ander lichaamsdeel is een noodsituatie die onmiddellijk door een arts onderzocht moet worden.

Symptoms: Plaatselijke necrose, kenbaar door vertraagd optreden van pijn en weefselbeschadiging.

Eye contact

Met veel water spoelen. In geval van irritatie, medische hulp vragen.

Symptoms: Irritatie.

Ingestion

Eerstehulp is normaal niet vereist. Medische hulp vragen wanneer ongemak optreedt.

Symptoms: Ongemak.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Geen speciale vereisten voor gewone gebruiksomstandigheden indien de ventilatie doeltreffend is.

Hands

Alle specifieke informatie over handschoenen is gebaseerd op gepubliceerde vakliteratuur en gegevens van de handschoenfabrikant. De geschiktheid van de handschoenen en de doorbraaktijd zullen verschillen naargelang de specifieke gebruiksomstandigheden. Contacteer de fabricant voor specifiek advies over de keuze van handschoen en doorbraaktijd voor uw gebruiksomstandigheden. Inspecteer en vervang versleten of beschadigde handschoenen. In gewone gebruiksomstandigheden is normaliter geen bescherming vereist.

Eyes

Indien contact mogelijk is, wordt een veiligheidsbril met zijkapjes aanbevolen.

Respiratory

Indien de ingezette voorzorgsmaatregelen ontoereikend zijn om de concentratie verontreinigingen in de lucht op een voor de gezondheid van de werknemers aanvaardbaar peil te houden, kan het nodig zijn een goedgekeurd ademhalingstoestel te gebruiken. Keuze, gebruik en onderhoud van het toestel moeten in overeenstemming zijn met de wettelijke bepalingen, indien van toepassing. Geen speciale vereisten voor gewone gebruiksomstandigheden indien de ventilatie doeltreffend is. In geval van hoge concentraties in de lucht, een goedgekeurd ademhalingstoestel met luchtaanvoer onder overdruk gebruiken. Ademhalingstoestellen met luchttoevoer en vluchtcilinder zijn aangewezen wanneer de zuurstofconcentratie ontoereikend is, de gas/damp waarschuwingsgegevens beperkt zijn, of wanneer de luchtfilter capaciteit/graad overschreden kan worden.

Skin/Body

In gewone gebruiksomstandigheden is normaliter geen huidbescherming vereist. In overeenstemming met goede procedures inzake arbeidshygiëne moeten voorzorgen genomen worden om contact met de huid te voorkomen.

Environmental

Voldoe aan de toepasselijke milieuwetgevingen inzake de beperkingen op uitstoot naar lucht, water en grond. Bescherm het milieu door de geschikte beheersmaatregelen te nemen om emissies te voorkomen of te beperken.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Evaporation Rate
---
Crystallisation Point
---
Explosive Limits
---
Ph
Technisch onmogelijk
Properties Status
---
Solubility In Water
---
Colour
Bruin
Softening Point
---
Odor Threshold
Geen gegevens beschikbaar
Odor
Typerend
Physical State Data
liquid
Melting Point
Technisch onmogelijk
Appearance
---
Evaporation Rate
Geen gegevens beschikbaar
Solubility
water Verwaarloosbaar
Physical State
Vloeistof
Density
---
Voc Content
---
State Under Standard Conditions
---
Metal Corrosion
---
Kinematic Viscosity
70.8 cSt (70.8 mm2/sec) bij 40°C | 13.23 cSt (13.23 mm2/sec) bij 100°C [ASTM D 445]
Solidification Point
---
Cloud Point
---
Vapor Density
> 2 bij 101 kPa [testmethode niet beschikbaar]
Colour Intensity
---
Solubility In Fat
---
Auto Ignition Temperature
Geen gegevens beschikbaar
Relative Density
0.846 [ASTM D4052]
Partition Coefficient
> 3.5 [testmethode niet beschikbaar]
Form
---
Boiling Point
> 316℃ (600°F) [testmethode niet beschikbaar]
Upper Explosive Limit
7.0
Decomposition Temperature
Geen gegevens beschikbaar
Dynamic Viscosity
---
Freezing Point
Geen gegevens beschikbaar
Bulk Density
---
Flash Point
>200°C (392ºF) [ASTM D-92]
Lower Explosive Limit
0.9
Molecular Weight
---
Flammability
Technisch onmogelijk
Vapor Pressure
< 0.013 kPa (0.1 mm Hg) bij 20℃ [testmethode niet beschikbaar]
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MOBIL 1 FS 0W-40?

The signal word is no signal word.

What is the physical form of MOBIL 1 FS 0W-40?

MOBIL 1 FS 0W-40 is a vloeistof with bruin color. It has typerend odor.

What is the solubility of MOBIL 1 FS 0W-40?

water Verwaarloosbaar

What is MOBIL 1 FS 0W-40 used for?

Motorolie

What is the melting point of MOBIL 1 FS 0W-40?

The melting point is Technisch onmogelijk and the boiling point is > 316℃ (600°F) [testmethode niet beschikbaar].

Compliance Scanner

Scan your compliance