NextSDS Logo
Safety Data Sheet NL

MOBILUBE LS 85W-90

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MOBILUBE LS 85W-90
Product Form
Basisolie met additieven
Product Code
201520504510, 511287-60

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Tandwielolie

Uses advised against

Geen, tenzij elders in dit veiligheidsinformatieblad aangegeven.

Manufacturers & Suppliers

ExxonMobil Petroleum & Chemical BVBA logo

ExxonMobil Petroleum & Chemical BVBA

national supplier

Polderdijkweg, B-2030 Antwerpen, België

+32 3 790 3111

http://www.msds.exxonmobil.com

Emergency Contacts

CHEMTREC

+32 28 083 237

24 uur

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

This product is defined as a mixture.

Chemical Name CAS Number Concentration Hazardous
Reactieproducten van alcoholen, C14-18, C18 onverzadigd, veresterd met fosforpentoxide en verzouten met amines, C12-14,-tert-alkyl EC: 939-591-3 --- 1 - 5% Yes
(Z)-octadec-9-enylamine, C16-18-(even genummerd, verzadigd en onverzadigd)alkylamines EC: 627-034-4 112-90-3 0.1 - 1% Yes
Olefine sulfide 68511-50-2 1 - 5% Yes
Reactieproducten van 4-methyl-2-pentanol en difosforpentasulfide, gepropoxyleerd, veresterd met difosforpentaoxide en verzouten met amines, C12-14,-tert-alkyl EC: 931-384-6 91745-46-9 1 - 2.5% Yes
Reactieproducten van 1,3,4-thiadiazolidine-2,5-dithion, formaldehyde en fenol, heptyl derivaten EC: 939-460-0 --- 0.1 - 1% Yes

Notes

Note: classifications in brackets are part of GHS that were not included by the EU in the CLP Regulation (No. 1272/2008) and are therefore not applicable in EU or non-EU countries that have implemented the CLP Regulation. This classification is shown for informational purposes only. All concentrations are expressed in weight percent unless the product is a gas. Gas concentrations are expressed in volume percent. Note: See Section 16 of this SDS for the full text of the hazard statements.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Aan verdere blootstelling onttrekken. Indien de ademhaling gestopt is, een beademingstoestel gebruiken of mond-op-mondbeademing toepassen.

Symptoms: irritatie van de ademhalingswegen, duizeligheid, misselijkheid of bewusteloosheid

Skin contact

De plaatsen waar de stof de huid geraakt heeft met zeep en water wassen. Injectie van het product in of onder de huid of in een ander lichaamsdeel is een noodsituatie die onmiddellijk door een arts onderzocht moet worden, welke het uitzicht of de afmetingen van de wonde ook zijn. Zelfs als de eerste symptomen van de hogedrukinjectie verwaarloosbaar of afwezig zijn, kan een medische behandeling binnen de eerste uren na het voorval de uiteindelijke ernst van de verwonding sterk verminderen.

Symptoms: Plaatselijke necrose, kenbaar door vertraagd optreden van pijn en weefselbeschadiging enkele uren na injectie.

Eye contact

Met veel water spoelen.

Symptoms: irritatie

Ingestion

Eerstehulp is normaal niet vereist.

Symptoms: ongemak

Immediate Medical Attention

Onmiddellijk medische hulp vragen in geval van irritatie van de ademhalingswegen, duizeligheid, misselijkheid of bewusteloosheid. Injectie van het product in of onder de huid of in een ander lichaamsdeel is een noodsituatie die onmiddellijk door een arts onderzocht moet worden, welke het uitzicht of de afmetingen van de wonde ook zijn. Zelfs als de eerste symptomen van de hogedrukinjectie verwaarloosbaar of afwezig zijn, kan een medische behandeling binnen de eerste uren na het voorval de uiteindelijke ernst van de verwonding sterk verminderen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Geen speciale vereisten voor gewone gebruiksomstandigheden indien de ventilatie doeltreffend is.

Hands

In gewone gebruiksomstandigheden is normaliter geen bescherming vereist. Nitrile. De geschiktheid van de handschoenen en de doorbraaktijd zullen verschillen naargelang de specifieke gebruiksomstandigheden. Contacteer de fabricant voor specifiek advies over de keuze van handschoen en doorbraaktijd voor uw gebruiksomstandigheden. Inspecteer en vervang versleten of beschadigde handschoenen.

Eyes

Indien contact mogelijk is, wordt een veiligheidsbril met zijkapjes aanbevolen.

Respiratory

Indien de ingezette voorzorgsmaatregelen ontoereikend zijn om de concentratie verontreinigingen in de lucht op een voor de gezondheid van de werknemers aanvaardbaar peil te houden, kan het nodig zijn een goedgekeurd ademhalingstoestel te gebruiken. Keuze, gebruik en onderhoud van het toestel moeten in overeenstemming zijn met de wettelijke bepalingen, indien van toepassing. Geen speciale vereisten voor gewone gebruiksomstandigheden indien de ventilatie doeltreffend is. In geval van hoge concentraties in de lucht, een goedgekeurd ademhalingstoestel met luchtaanvoer onder overdruk gebruiken. Ademhalingstoestellen met luchttoevoer en vluchtcilinder zijn aangewezen wanneer de zuurstofconcentratie ontoereikend is, de gas/damp waarschuwingsgegevens beperkt zijn, of wanneer de luchtfilter capaciteit/graad overschreden kan worden.

Skin/Body

In gewone gebruiksomstandigheden is normaliter geen huidbescherming vereist. In overeenstemming met goede procedures inzake arbeidshygiëne moeten voorzorgen genomen worden om contact met de huid te voorkomen.

Environmental

Voldoe aan de toepasselijke milieuwetgevingen inzake de beperkingen op uitstoot naar lucht, water en grond. Bescherm het milieu door de geschikte beheersmaatregelen te nemen om emissies te voorkomen of te beperken.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Vloeistof
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Bruin
Colour Intensity
---
Form
---
Odor
Typerend
Odor Threshold
Geen gegevens beschikbaar
Ph
Technisch onmogelijk
Melting Point
Technisch onmogelijk
Boiling Point
- 316C (600F) [Geschat]
Flash Point
>216C (421F) [ASTM D-92]
Freezing Point
Geen gegevens beschikbaar
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
Geen gegevens beschikbaar
Evaporation Rate
---
Vapor Pressure
< 0.013 kPa (0.1 mm Hg) bij 20C [Geschat]
Vapor Density
---
Relative Density
0.899 [ASTM D1298]
Bulk Density
---
Density
---
Flammability
Technisch onmogelijk
Upper Explosive Limit
7.0
Lower Explosive Limit
0.9
Explosive Limits
---
Auto Ignition Temperature
Geen gegevens beschikbaar
Decomposition Temperature
Geen gegevens beschikbaar
Solubility
---
Partition Coefficient
- 3.5 [Geschat]
Solubility In Water
Verwaarloosbaar
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
153 cSt (153 mm2/sec) bij 40C | 15.4 cSt (15.4 mm2/sec) bij 100C [ASTM D 445]
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MOBILUBE LS 85W-90?

The signal word is no signal word.

What is the physical form of MOBILUBE LS 85W-90?

MOBILUBE LS 85W-90 is a vloeistof with bruin color. It has typerend odor.

What is MOBILUBE LS 85W-90 used for?

Tandwielolie

What is the melting point of MOBILUBE LS 85W-90?

The melting point is Technisch onmogelijk and the boiling point is - 316C (600F) [Geschat].