NextSDS Logo
Safety Data Sheet NL

MARKER PAINT fluo colors

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MARKER PAINT fluo colors
Product Form
Aërosol
Product Code
BDS001592AE

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Professioneel gebruik, Verven

Uses advised against

Geen aanvullende informatie beschikbaar

Manufacturers & Suppliers

CRC Industries Europe B.V. logo

CRC Industries Europe B.V.

distributor

Touwslagerstraat 1, 9240 Zele, Belgium

http://www.crcind.com

Emergency Contacts

CRC Industries Europe B.V.

+32(0)52/45.60.11

9-17h CET

Centre Anti-Poisons/Antigifcentrum c/o Hôpital Militaire Reine Astrid

+32 70 245 245

Centre Anti-Poisons/Antigifcentrum c/o Hôpital Militaire Reine Astrid

02 264 96 30

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H336

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H222 Zeer licht ontvlambare aerosol.
H229 Houder onder druk: kan open barsten bij verhitting.
H319 Veroorzaakt ernstige oogirritatie.
H336 Kan slaperigheid of duizeligheid veroorzaken.

Precautionary Statements

P102 Buiten het bereik van kinderen houden.
P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P211 Niet in een open vuur of op andere ontstekingsbronnen spuiten.
P251 Ook na gebruik niet doorboren of verbranden.
P261 Inademing van damp/spuitnevel vermijden.
P280 Draag beschermende handschoenen/oogbescherming.
P410+P412 Tegen zonlicht beschermen. Niet blootstellen aan temperaturen boven 50 ℃.
P501 Inhoud/verpakking afvoeren naar een verzamelpunt voor gevaarlijk of speciaal afval, overeenkomstig de lokale, regionale, nationale en/of internationale regelgeving.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mengsels van verschillende chemicaliën met specifieke concentraties en hazard classificaties.

Chemical Name CAS Number Concentration Hazardous
dimethylether EC: 204-065-8 115-10-6 30 - 50% Yes
ethylacetaat EC: 205-500-4 141-78-6 20 - 30% Yes
n-butylacetaat EC: 204-658-1 123-86-4 10 - 20% Yes
2-methoxy-1-methylethylacetaat EC: 203-603-9 108-65-6 2.5 - 5% Yes
formaldehyde EC: 200-001-8 50-00-0 0.05% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

De persoon in de frisse lucht brengen en ervoor zorgen dat deze gemakkelijk kan ademen. Roep medische hulp in indien verschijnselen/symptomen zich voordoen.

Symptoms: Kan slaperigheid of duizeligheid veroorzaken.

Skin contact

De huid met overvloedig water wassen. Medische hulp inroepen indien irritatie ontstaat.

Symptoms: Herhaalde blootstelling kan een droge of een gebarsten huid veroorzaken.

Eye contact

Voorzichtig afspoelen met water gedurende een aantal minuten. Contactlenzen verwijderen, indien mogelijk. Blijven spoelen. Bij aanhoudende oogirritatie: een arts raadplegen. Medische hulp inroepen indien irritatie ontstaat.

Symptoms: Irritatie van de ogen.

Ingestion

Bij onwel voelen een antigifcentrum of een arts raadplegen.

Immediate Medical Attention

Zorg voor algemene ondersteunende maatregelen en behandel symptomatisch. Hou het slachtoffer onder toezicht. Symptomen kunnen zich pas na enige tijd openbaren.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Er moet een goede algehele ventilatie worden gebruikt. Ventilatiesnelheden moeten zijn aangepast aan de omstandigheden. Gebruik, indien van toepassing, afgesloten procesruimten, plaatselijke afzuiging of andere technische middelen om de concentraties in de lucht onder de aanbevolen blootstellingslimieten te houden. Wanneer er geen blootstellingslimieten zijn vastgesteld, houd dan de concentraties in de lucht op een aanvaardbaar niveau.

Hands

Draag geschikte handschoenen die getest zijn volgens EN374. De doorbraaktijd van de handschoen moet langer zijn dan de totale duur van het gebruik van het product. Als de werkzaamheden met het product langer duurt dan de doorbraaktijd van de handschoen, moet die tussenin vervangen worden. Handschoenen van nitril zijn aan te bevelen. Beschermende handschoenen van butylrubber.

Eyes

Oogbescherming gebruiken in overeenstemming met EN 166. Veiligheidsbril met zijkleppen.

Respiratory

Bij ontoereikende ventilatie een geschikt ademhalingsapparaat gebruiken. Goedgekeurd gasmasker voor organische dampen. Type filter: A

Skin/Body

Draag geschikte beschermende kleding

Environmental

Voorkom lozing in het milieu. Emissies van ventilatie- of procesapparatuur moet worden gecontroleerd om na te gaan dat zij voldoen aan de vereisten van milieubeschermingswetten.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Form
---
Solubility In Water
niet oplosbaar in water.
Flash Point
- 39 ℃ (gesloten beker)
Partition Coefficient
Niet van toepassing
Solubility
niet oplosbaar in water.
Freezing Point
Niet beschikbaar
Physical State Data
liquid
Solubility In Fat
---
Evaporation Rate
---
Colour Intensity
---
State Under Standard Conditions
---
Auto Ignition Temperature
240 ℃
Boiling Point
- 25 °℃ (DME)
Properties Status
---
Kinematic Viscosity
Niet beschikbaar
Odor Threshold
---
Dynamic Viscosity
---
Decomposition Temperature
Niet beschikbaar
Vapor Density
---
Metal Corrosion
---
Density
0,802 g/cm3 bij 20℃
Upper Explosive Limit
Niet beschikbaar
Relative Evaporation Rate
---
Lower Explosive Limit
Niet beschikbaar
Melting Point
Niet van toepassing
Vapor Pressure
< 300 kPa
Molecular Weight
---
Odor
karakteristiek.
Physical State
Vloeibaar
Relative Density
0,802 bij 20°℃
Explosive Limits
---
Crystallisation Point
---
Colour
Zie kleur dop.
Softening Point
---
Voc Content
712 g/l
Appearance
Vloestof in spuitbus met DME drijfgas.
Flammability
Zeer licht ontvlambare aerosol.
Cloud Point
---
Solidification Point
---
Bulk Density
---
Ph
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN 1950
Shipping Name
SPUITBUSSEN (AËROSOLEN)
Transport Class
2.1
Packing Group
Niet van toepassing
ADR

Bijzondere bepalingen (ADR): 190, 327, 344, 625

IMDG

Bijzondere bepaling (IMDG): 63, 190, 277, 327, 344, 381, 959

IATA

Bijzondere bepalingen (IATA): A145, A167, A802

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MARKER PAINT fluo colors?

The signal word is danger.

What is the physical form of MARKER PAINT fluo colors?

MARKER PAINT fluo colors is a vloeibaar appearing as vloestof in spuitbus met dme drijfgas. with zie kleur dop. color. It has karakteristiek. odor.

What is the solubility of MARKER PAINT fluo colors?

niet oplosbaar in water.

What is MARKER PAINT fluo colors used for?

Professioneel gebruik, Verven

What are the hazard statements for MARKER PAINT fluo colors?

This substance has 4 hazard statements:

  • H222: Zeer licht ontvlambare aerosol.
  • H229: Houder onder druk: kan open barsten bij verhitting.
  • H319: Veroorzaakt ernstige oogirritatie.
  • H336: Kan slaperigheid of duizeligheid veroorzaken.

What is the melting point of MARKER PAINT fluo colors?

The melting point is Niet van toepassing and the boiling point is - 25 °℃ (DME).