Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- COLORMARK Spot Marker / Fluo / Allround / temporary
- Product Code
- 201479, 201486, 201493, 201509, 201516, 201523, 201530, 201547, 201554, 201561, 201578, 201585, 201592, 201608, 201615, 201622, 220739, 220746, 220753, 220760, 220777, 220784, 226847, 226854, 226861, 226878, 226885, 226892, 226908, 226915, 226922, 226939, 230721, 230738, 230745, 230752, 230769, 230776, 252914, 252981, 257650, 278280, 318993, 404474, 410970, 410987
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lak
Manufacturers & Suppliers
MOTIP DUPLI GmbH
manufacturer
Kurt Vogelsang Strasse 6, D-74855 Haßmersheim
+49/6266/75-0
Emergency Contacts
NVIC
030-2748888
24 uur per dag
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mengsel van na elkaar aangevoerde stoffen met ongevaarlijke bijmengingen.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| nafta (aardolie), met waterstof behandeld zwaar EC: 265-150-3 | 64742-48-9 | 20 - 25% | Yes |
| propaan EC: 200-827-9 | 74-98-6 | 12.5 - 20% | Yes |
| butaan EC: 203-448-7 | 106-97-8 | 12.5 - 20% | Yes |
| ethylacetaat EC: 205-500-4 | 141-78-6 | 5 - 10% | Yes |
| isobutaan EC: 200-857-2 | 75-28-5 | 5 - 10% | Yes |
| Kohlenwasserstoffe, C9-C10, n-Alkane, Isoalkane, Cycloalkane <2% Aromaten EC: 927-241-2 | --- | 5 - 10% | Yes |
| n-butylacetaat EC: 204-658-1 | 123-86-4 | 2.5 - 5% | Yes |
The content of Benzene (EINECS-Nr. 200-753-7) in the ingredients is less than 0,1% (Note P Annex 1 67/548 EU), so the classification as carcinogen need not to apply.
First Aid Measures
Emergency procedures for chemical exposure incidents
Frisse lucht toedienen; bij klachten arts ontbieden.
Over het algemeen is het product niet prikkelend voor de huid
Ogen met open ooglid een aantal minuten onder stromend water afspoelen en dokter raadplegen.
Drink zeer veel water en voer verse lucht aan. Onmiddellijk een dokter waarschuwen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, bluspoeder of waterstraal. Grotere brand met waterstraal bestrijden of met schuim, dat tegen alcohol bestand is.
Krachtige waterstraal
Geen verdere relevante informatie verkrijgbaar.
Firefighter Protection
Geen bijzondere maatregelen nodig.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Beschermende kleding aantrekken. Niet beschermde personen op afstand houden.
Niet in de riolering/het oppervlaktewater/het grondwater laten terechtkomen.
Niet met water of waterachtige reinigingsmiddelen wegspoelen.
Related Products
Similar products with comparable safety profiles
Spotmark, various colours / Fluo / 360° / Temporary 500ml
---
MARKER PAINT fluo colors
---
MARKERINGSVERF -A- VARIOUS COLOURS 600 ML
---
MOTIP MARKERINGSPRAY Blauw / Rood / Wit / Geel
---
Aerosol Markierungsfarbe fluorescent orange
---
Finixa fluo markeerstift
---
MOTIP MARKERINGSPRAY Blauw / Rood / Wit / Geel / Zwart / Grijs
---
MOTIP MARKERINGSPRAY Blauw / Rood / Wit / Geel / Zwart / Grijs
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Tanks voorzichtig openen en behandelen.
Op een koele plaats bewaren. De overheidsbepalingen m.b.t. de opslag van drukgaspakkingen moeten in acht genomen worden. Koel en droog bewaren in goed gesloten vaten. Tegen hitte en directe zonnestralen beschermen.
Onstekingsbronnen op afstand houden - niet roken. Maatregelen treffen tegen ontlading van statische elektriciteit.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Veiligheidshandschoenen. Handschoenen / bestand tegen oplosmiddelen. In case of contact with spray dust protective gloves made of butyl should be used (min. 0.4 mm thick), e.g. KCL Camatril, article no. 898 or similar products. Het handschoenmateriaal moet ondoorlatend en bestand zijn tegen het product / de stof / de bereiding. Kies handschoenmateriaal rekening houdend met de penetratietijden, de permeatiegraden en de degradatie. Handschoenmateriaal: Natuurrubber (latex), Butylrubber. Doordringingstijd van het handschoenmateriaal: Butyl rubber gloves with a thickness of 0.4 mm are resistant to: Acetone: 480 min, Butyl acetate: 60 min, Ethyl acetate: 170 min, Xylene: 42 min.
Veiligheidsbril
Bij goede ventilatie niet noodzakelijk. Anders filter klasse A / P 2 of zelf-onafhankelijk.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Geen afbraak bij gebruik volgens voorschrift.
Geen gevaarlijke reacties bekend.
Geen verdere relevante informatie verkrijgbaar.
Geen verdere relevante informatie verkrijgbaar.
Geen gevaarlijke ontbindingsproducten bekend.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- SPUITBUSSEN
- Transport Class
- 2
- Packing Group
- vervalt
Waarschuwing: Gassen
Waarschuwing: Gassen
Waarschuwing: Gassen
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for COLORMARK Spot Marker / Fluo / Allround / temporary?
The signal word is danger.
What is the physical form of COLORMARK Spot Marker / Fluo / Allround / temporary?
COLORMARK Spot Marker / Fluo / Allround / temporary is a aërosol appearing as volgens de productbeschrijving with volgens de productbeschrijving color. It has karakteristiek odor.
What is COLORMARK Spot Marker / Fluo / Allround / temporary used for?
Lak
What are the hazard statements for COLORMARK Spot Marker / Fluo / Allround / temporary?
This substance has 1 hazard statement:
- H222: Zeer licht ontvlambare aerosol. Houder onder druk: kan openbarsten bij verhitting.
What is the melting point of COLORMARK Spot Marker / Fluo / Allround / temporary?
The melting point is Niet bepaald. and the boiling point is Vanwege aerosol niet bruikbaar..