Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Difenyl|methaan-4,4'-di|isocyanaat (mengsel van di- en triisocyanaten) voor synthese
- Product Code
- 8.20797
- Chemical Name
- Difenyl|methaan-4,4'-di|isocyanaat
Regulatory Identifiers
- CAS Number
- 101-68-8 Check regulations →
- REACH No.
- Een registratienummer is niet beschikbaar voor deze stof omdat de stof of het gebruik is uitgezonderd voor registratie of voor het jaarlijks volume geen registratie vereist is.
Identified Uses
Synthese chemicalie
Manufacturers & Suppliers
Millipore
distributor
Merck Life Science BV/SRL
distributor
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| difenylmethaan-4,4'-diisocyanaat (mengsel met diisocyanaten en triisocyanaten) EC: 202-966-0 | 101-68-8 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inademen: frisse lucht. Direct een arts waarschuwen. Bij ademstilstand: Meteen mechanische beademing, eventueel zuurstof toedienen.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen. Een arts raadplegen.
Na oog contact: uitspoelen met ruim voldoende water. Oogarts raadplegen. Contactlenzen uitnemen.
Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Difenylmethaan-4,4'-diisocyanaat (mengsel van di- en triisocyanaten) voor synthese
---
difenylmethaandiisocyanaat, isomeren en homologen
---
isoforon|diamine (mengsel van stereoisomeren) voor synthese
CAS: 2855-13-2
isoforon|diamine (mengsel van stereoisomeren) voor synthese
CAS: 2855-13-2
tert-Dodecaanthiol (mengsel van isomeren) voor synthese
CAS: 25103-58-6
1-Fenyldodecaan voor synthese
CAS: 123-01-3
Natrium-dichloorisocyanuraat dihydraat
CAS: 51580-86-0
Decahydronaftaleen (mengsel van cis- en trans-Isomeren) synthese kwaliteit
CAS: 91-17-8
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Deze aanbeveling heeft alleen betrekking op het in het veiligheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN 16523-1 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Spad contact Materiaal: butylrubber Minimale laagdikte: 0,7 mm Doorbraaktijd: 120 min Getest materiaal: Butoject® (KCL 898)
Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU).
Aanbevolen filtertype: Filter B-(P3). De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.
beschermende kleding
Product niet in de riolering laten komen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Niet-gevaarlijke goederen
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Difenyl|methaan-4,4'-di|isocyanaat (mengsel van di- en triisocyanaten) voor synthese?
The signal word is danger.
What is the physical form of Difenyl|methaan-4,4'-di|isocyanaat (mengsel van di- en triisocyanaten) voor synthese?
Difenyl|methaan-4,4'-di|isocyanaat (mengsel van di- en triisocyanaten) voor synthese is a vloeibaar with bruin color.
What is Difenyl|methaan-4,4'-di|isocyanaat (mengsel van di- en triisocyanaten) voor synthese used for?
Synthese chemicalie
What are the hazard statements for Difenyl|methaan-4,4'-di|isocyanaat (mengsel van di- en triisocyanaten) voor synthese?
This substance has 8 hazard statements:
- H315: Veroorzaakt huidirritatie.
- H317: Kan een allergische huidreactie veroorzaken.
- H319: Veroorzaakt ernstige oogirritatie.
- H332: Schadelijk bij inademing.
- H334: Kan bij inademing allergie- of astmasymptomen of ademhalingsmoeilijkheden veroorzaken.
- H335: Kan irritatie van de luchtwegen veroorzaken.
- H351: Verdacht van het veroorzaken van kanker.
- H373: Kan schade aan organen (Ademhalingsstelsel) veroorzaken bij langdurige of herhaalde blootstelling bij inademing.
What is the melting point of Difenyl|methaan-4,4'-di|isocyanaat (mengsel van di- en triisocyanaten) voor synthese?
The melting point is 39 - 43 ºC and the boiling point is > 300 °C.