NextSDS Logo
Safety Data Sheet NL

PT181 POWERTINT(R) YELLOW OXIDE

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
PT181 POWERTINT(R) YELLOW OXIDE
Product Code
PT181

Regulatory Identifiers

CAS Number
N/A

Identified Uses

SU 3, SU 22; PC9a, PC9b

Uses advised against

Het product is alleen bestemd voor industrieel en/of professioneel gebruik, niet voor enig huishoudelijk gebruik.

Manufacturers & Suppliers

Axalta Coating Systems Germany GmbH logo

Axalta Coating Systems Germany GmbH

manufacturer

Horbeller Str. 15, 50858 Köln

+49(0) 2234 6019-01

http://www.cromax.com/

Emergency Contacts

Fabrikant

+31 (0)78 630-1899

Nationaal telefoonnummer voor noodgevallen

070 245.245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Flam. Liq. Cat. 3 H226
STOT SE Cat. 3 H336
EUH066
EUH208

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H226 Ontvlambare vloeistof en damp.
H336 Kan slaperigheid of duizeligheid veroorzaken.

Precautionary Statements

P210 Verwijderd houden van warmte/vonken/open vuur/hete oppervlakken. - Niet roken.
P261 Inademing van stof/ damp/ spuitnevel vermijden.
P403 + P233 Op een goed geventileerde plaats bewaren. In goed gesloten verpakking bewaren.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mengsel uit synthetische kunstharsen, pigmenten en oplosmiddelen.

Chemical Name CAS Number Concentration Hazardous
n-butylacetaat EC: 204-658-1 123-86-4 20 - 25% Yes
heptaan-2-on EC: 203-767-1 110-43-0 1 - 2% Yes
2-hydroxyethylmethacrylaat EC: 212-782-2 868-77-9 0.1 - 0.2% Yes
methylmethacrylaat EC: 201-297-1 80-62-6 0.1 - 0.2% Yes

Volledige tekst van de R-zinnen: zie hoofdstuk16. Volledige tekst van de H-zinnen: zie hoofdstuk16.

Notes

Informatie over gezondheidsgevaren is gebaseerd op de bestanddelen.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Voorkom inademing van damp of nevel. In de frisse lucht brengen na onopzettelijk inademen van dampen. Bij onregelmatige ademhaling of ademstilstand kunstmatige beademing toepassen. Bij bewusteloosheid de patiënt in stabiele zijligging leggen en medische hulp inroepen. Indien symptomen aanhouden, een arts raadplegen.

Skin contact

Geen oplosmiddelen of verdunners gebruiken! Verontreinigde kleding onmiddellijk uittrekken.

Eye contact

Contactlenzen uitnemen. Oogleden openhouden en minstens 15 minuten met veel water spoelen. Medische hulp inroepen.

Ingestion

In geval van inslikken onmiddellijk een arts raadplegen en verpakking of etiket tonen. GEEN braken opwekken. Rustig houden.

Immediate Medical Attention

Bij bewusteloosheid de patiënt in stabiele zijligging leggen en medische hulp inroepen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Zorg voor voldoende luchtverversing. Dit kan bereikt worden door goede algemene afzuiging of, waar praktisch uitvoerbaar, plaatselijke afzuigventilatie. Als deze maatregelen niet voldoende blijken om de stofconcentratie en oplosmiddelconcentratie beneden de MAC waarde te houden moet geschikte adembescherming worden gedragen. Masker met gasfilter, type A (EN 141)

Hands

De doordringingtijd van de handschoenen voor de stof zelf is onbekend. Het omschreven materiaal voor de handsschoenen wordt aanbevolen op basis van de bestanddelen van het preparaat. Voor bescherming bij spuiten moet een beschermende nitrilhandschoen van de chemicaliënbestendigheidsgroep 3 (bijvoorbeeld een Dermatril®-handschoen) worden gebruikt. Na verontreiniging moet de handschoen worden verwisseld. Als het onderdompelen van de handen in het product niet te voorkomen is, moet een butyl- of fluorrubber handschoen worden gedragen. De beschermende handschoenen moeten bij beschadiging of de eerste tekenen van slijtage meteen worden vervangen. Handschoenmaterialen en eigenschappen: Viton (R) ®, 0,7 mm dikte, penetratietijd 10 min; Nitrilrubber, 0,33 mm dikte, penetratietijd 30 min.

Eyes

Ter bescherming van spatten van het oplosmiddel veiligheidsbril dragen.

Respiratory

Als stofconcentratie en oplosmiddelconcentratie boven de MAC waarde komen, moet geschikte adembescherming worden gedragen. Masker met gasfilter, type A (EN 141). Indien personeel wordt blootgesteld aan een niveau boven het maximum, dan moeten zij gebruik maken van de juiste, goedgekeurde ademhalingsbescherming.

Skin/Body

Draag geschikte beschermende kleding. Antistatische kleding uit natuurlijke vezels (katoen) of synthetische vezels dragen die bestand is tegen hitte.

Environmental

Product niet in de riolering laten komen. Zie hoofdstuk 12 voor ecologische informatie.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solidification Point
---
Odor Threshold
---
Density
---
Freezing Point
---
Decomposition Temperature
This product is a mixture. See section 10 for further information.
Lower Explosive Limit
1.7 vol-% based on the content of organic solvent
Odor
no odor detectable
Vapor Pressure
3.8 hPa
Melting Point
---
Form
liquid
Cloud Point
---
Crystallisation Point
---
Physical State
liquid
Metal Corrosion
---
Properties Status
---
Ph
pH cannot be measured due to lower solubility in water.
Softening Point
---
Boiling Point
126 ℃
Appearance
---
Explosive Limits
---
Flash Point
30 ℃
Evaporation Rate
Slower than ether
Partition Coefficient
---
Colour Intensity
---
Solubility In Fat
miscible with most organic solvents
Dynamic Viscosity
---
Auto Ignition Temperature
393 °C
Solubility In Water
partially miscible
Physical State Data
liquid
Relative Density
1.53 g/cm3
Solubility
partially miscible
State Under Standard Conditions
---
Upper Explosive Limit
7.6 vol-% based on the content of organic solvent
Vapor Density
---
Kinematic Viscosity
23 s
Relative Evaporation Rate
---
Bulk Density
---
Molecular Weight
---
Flammability
not relevant, since the product is liquid
Voc Content
26.9 %
Colour
yellow
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1263
Shipping Name
VERF
Transport Class
3
Packing Group
III
ADR

640E

IMDG

F-E,S-E

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for PT181 POWERTINT(R) YELLOW OXIDE?

The signal word is warning.

What is the physical form of PT181 POWERTINT(R) YELLOW OXIDE?

PT181 POWERTINT(R) YELLOW OXIDE is a liquid with yellow color. It has no odor detectable odor.

What is the solubility of PT181 POWERTINT(R) YELLOW OXIDE?

partially miscible

What is PT181 POWERTINT(R) YELLOW OXIDE used for?

SU 3, SU 22; PC9a, PC9b

What are the hazard statements for PT181 POWERTINT(R) YELLOW OXIDE?

This substance has 2 hazard statements:

  • H226: Ontvlambare vloeistof en damp.
  • H336: Kan slaperigheid of duizeligheid veroorzaken.