NextSDS Logo
Safety Data Sheet NL

Ijzer(III)chloride, oplossing (40%)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Ijzer(III)chloride, oplossing (40%)
Product Form
Mengsel
Chemical Name
Ijzer(III)chloride, oplossing (40%)

Regulatory Identifiers

CAS Number
N/A
REACH No.
01-2119497998-05

Identified Uses

Zie tabel op de eerste pagina van de bijlage.

Uses advised against

Dit product wordt niet aanbevolen voor industrieel, beroepsmatig of consumentengebruik anders dan vermeld in tabel op de eerste pagina van de bijlage.

Manufacturers & Suppliers

BRENNTAG N.V. logo

BRENNTAG N.V.

national supplier

Nijverheidslaan 38 - BE-8540 DEERLIJK

+32(0)56/77.69.44

http://www.brenntag.be

BRENNTAG Nederland B.V. logo

BRENNTAG Nederland B.V.

national supplier

Donker Duyvisweg 44 - NL-3316 BM DORDRECHT

+31(0)78/65.44.944

http://www.brenntag.nl

Emergency Contacts

Antigifcentrum - Brussel

+32(0)70/245.245

Nationaal Vergiftigingen Informatie Centrum - Bilthoven

+31(0)30/274.88.88

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Acute Tox. Cat. 4 H302
Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H290 Kan bijtend zijn voor metalen.
H302 Schadelijk bij inslikken.
H315 Veroorzaakt huidirritatie.
H318 Veroorzaakt ernstig oogletsel.

Precautionary Statements

P280 Beschermende handschoenen, oog- of gelaatsbescherming dragen.
P301 + P312 NA INSLIKKEN : Bij onwel voelen een ANTIGIFCENTRUM of een arts raadplegen.
P302 + P352 BIJ CONTACT MET DE HUID : Met veel water en zeep wassen.
P305 + P351 + P338 BIJ CONTACT MET DE OGEN : Voorzichtig afspoelen met water gedurende een aantal minuten. Contactlenzen verwijderen, indien mogelijk. Blijven spoelen.
P310 Onmiddellijk een ANTIGIFCENTRUM of een arts raadplegen.
P501 Deze stof en de verpakking naar inzamelpunt voor gevaarlijk of bijzonder afval brengen.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Ijzer(III)chloride and Zoutzuur

Chemical Name CAS Number Concentration Hazardous
Ijzer(III)chloride EC: 231-729-4 7705-08-0 39 - 41% Yes
Zoutzuur ...% EC: 231-595-7 7647-01-0 1 - 2% Yes

Notes

Nota B (Verordening (EG) nr. 1272/2008) is van toepassing voor het product of voor één of meerdere van zijn bestanddelen. Nota: SCL van toepassing (Zoutzuur ...%)

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Het slachtoffer in de frisse lucht brengen. Slachtoffer rustig houden, in halfzittende houding. Als het slachtoffer niet of onregelmatig ademt, kunstmatige beademing toepassen. Een arts raadplegen.

Skin contact

Verontreinigde kledij uittrekken. Huid onmiddellijk spoelen met veel water en zeep. (ev. douchen). Een arts raadplegen.

Eye contact

Onmiddellijk grondig en langdurig (minstens 15 min.) spoelen met veel water. Contactlenzen verwijderen. Daarna naar oogarts brengen. Oog blijven spoelen of druppelen tijdens vervoer.

Ingestion

NIET LATEN BRAKEN. De mond spoelen met water. Bij onwel voelen een ANTIGIFCENTRUM of een arts raadplegen.

Immediate Medical Attention

Voor specialistisch advies dient de arts contact op te nemen met het NVCI of het Belgisch Antigifcentrum.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Bluspoeder, Schuim, Koolstofdioxide (CO2), Sproeistraalwater.

Unsuitable media

Sterke waterstraal.

Specific hazards

Bij brand kunnen giftige en bijtende dampen vrijkomen. (O.a. Chloor, Waterstofchloride).

Instructions

Gebruik (verneveld) water om de naburige verpakkingen en constructies af te koelen.

Firefighter Protection

In de onmiddellijke nabijheid van het vuur een onafhankelijk ademhalingstoestel en beschermende kledij dragen.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ontruim onmiddellijk de besmette ruimtes en zorg voor voldoende ventilatie. Vermijd inademing van de dampen en aanraking met de ogen, de huid en de kledij.

Environmental

Verhinder dat het product in open water, riolering of de bodem terechtkomt.

Cleanup methods

Lekvloeistof opvangen in afsluitbare afvalvaten. Gemorst product zo snel mogelijk opruimen d.m.v. een inert, absorberend product. Verdun de morsvloeistof onmiddellijk met veel water en neutraliseer met base.

Materials: inert, absorberend product

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

STRENGE HYGIENE ! VERMIJD VORMING VAN NEVEL ! Vermijd inademing van de dampen en aanraking met de ogen, de huid en de kledij. Draag geschikte, persoonlijke veiligheidsuitrusting. Vermijd opwarming, spatten en dampvorming bij leegmaken, overgieten, verdunnen of oplossen van het product. Niet eten, drinken, of roken tijdens gebruik.

Storage

Uitsluitend in de oorspronkelijke, goed gesloten verpakking bewaren op een goed geventileerde, koele en donkere plaats.

Hygiene

STRENGE HYGIENE ! Niet eten, drinken, of roken tijdens gebruik.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ventilatie, Plaatselijke afzuiging.

Hands

Geschikt materiaal voor veiligheidshandschoenen (EN 374): Aangezien het product een mengsel is van verschillende stoffen, kan de duurzaamheid van de handschoenmaterialen niet vooraf berekend worden en moet het vóór gebruik getest worden. - materiaal : PVC - dikte : 0,7 mm - doorbraaktijd > 480' - materiaal : Neopreen, Nitrilrubber - dikte : 0,5 mm - doorbraaktijd : > 480'

Eyes

Aansluitende veiligheidsbril of gelaatsscherm.

Respiratory

CE-goedgekeurd masker voor zure gassen en dampen (type E, geel).

Skin/Body

Corrosiebestendige beschermingskledij.

Environmental

Zie rubrieken 6, 7, 12 en 13.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Upper Explosive Limit
Niet van toepassing.
Relative Density
1,4
Odor
Prikkelende geur.
Solubility In Water
Volledig oplosbaar
Explosive Limits
---
Decomposition Temperature
315 °C
Colour
Donkerbruin.
Properties Status
---
Kinematic Viscosity
---
Colour Intensity
---
Lower Explosive Limit
Niet van toepassing.
Boiling Point
100 - 105 °C
Evaporation Rate
Geen gegevens beschikbaar.
Bulk Density
---
Metal Corrosion
---
Auto Ignition Temperature
Geen gegevens beschikbaar.
Physical State
Vloeistof.
Solubility In Fat
---
Cloud Point
---
Voc Content
---
Flammability
Niet van toepassing.
Partition Coefficient
-4
Odor Threshold
Geen gegevens beschikbaar.
Vapor Pressure
Geen gegevens beschikbaar.
Softening Point
---
Ph
< 1
Molecular Weight
---
Appearance
Donkerbruin.
Flash Point
Niet van toepassing.
Physical State Data
liquid
Solidification Point
---
State Under Standard Conditions
---
Dynamic Viscosity
5 - 20 mPas
Density
1,41 - 1,45 kg/l
Freezing Point
-50 °C
Relative Evaporation Rate
---
Melting Point
-50 °C
Vapor Density
---
Form
---
Crystallisation Point
---
Solubility
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stabiel bij normale omstandigheden.

Reactivity

Reageert heftig met basen.

Hazardous reactions

Bij contact met metalen stoffen kan ontvlambaar waterstofgas gevormd worden. Vorming van: Zoutzuur).

Avoid

Hoge temperaturen, Bevriezing.

Incompatible

Basen, Lichte metalen, Halogeenkoolwaterstoffen, Metalen.

Decomposition

Chloor, Waterstofchloride, Waterstofgas.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Het product moet vernietigd worden volgens de nationale en lokale wettelijke bepalingen, door een wettelijk erkende verwerver van gevaarlijke afvalproducten.

Waste Codes

XXXXXX Europese afvalstoffencode. Deze code wordt toegewezen op basis van de meest courante toepassingen en kunnen niet representatief zijn voor de verontreinigingen die bij het effectief gebruik van het product ontstaan. De producent van het afval moet zelf zijn proces evalueren en de gepaste afval codering toekennen. EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
2582
Shipping Name
Ijzer(III)chloride, oplossing
Transport Class
8
Packing Group
III
IMDG

F-A , S-B

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Performed

NFPA-nr. : 3-0-0

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Ijzer(III)chloride, oplossing (40%)?

The signal word is danger.

What is the physical form of Ijzer(III)chloride, oplossing (40%)?

Ijzer(III)chloride, oplossing (40%) is a vloeistof. appearing as donkerbruin. with donkerbruin. color. It has prikkelende geur. odor.

What is Ijzer(III)chloride, oplossing (40%) used for?

Zie tabel op de eerste pagina van de bijlage.

What are the hazard statements for Ijzer(III)chloride, oplossing (40%)?

This substance has 4 hazard statements:

  • H290: Kan bijtend zijn voor metalen.
  • H302: Schadelijk bij inslikken.
  • H315: Veroorzaakt huidirritatie.
  • H318: Veroorzaakt ernstig oogletsel.

What is the melting point of Ijzer(III)chloride, oplossing (40%)?

The melting point is -50 °C and the boiling point is 100 - 105 °C.