Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- IJzer(III) chloride-oplossing 40 %
- Product Code
- 7750
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- niet relevant (mengsel)
- UFI Code
- 07V2-10WJ-800E-4P3P
Identified Uses
Laboratoriumchemicaliën, Analytische en laboratoriumtoepassingen
Uses advised against
Niet te gebruiken voor privédoeleinden (huishouden). Eet- en drinkwaren en diervoeder.
Manufacturers & Suppliers
Carl Roth GmbH + Co. KG
manufacturer
Schoemperlenstr. 3-5, D-76185 Karlsruhe, Duitsland
+49 (0) 721 - 56 06 0
https://www.carlroth.de
CARL ROTH GmbH + Co. KG
importer
België
+32 3 2834710 (Vlaanderen) / +32 80 447958 (Wallonie)
https://www.carlroth.be
Emergency Contacts
Centre Antipoisons c/o Hôpital Militaire Reine Astrid
+32 70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Voor verse lucht zorgen. Bij twijfel of bij aanhoudende symptomen een arts raadplegen.
Huid met water afspoelen/afdouchen. Na aanraking met de huid onmiddellijk wassen met veel water. In geval van huidreacties arts consulteren. In geval van huidirritatie arts raadplegen.
Symptoms: Irritatie, Allergische reacties, Corrosie
Bij contact met de ogen direct met geopende oogleden 10 tot 15 minuten met stromend water spoelen en oogarts consulteren.
Symptoms: Gevaar voor ernstig oogletsel, Gevaar voor blindheid
Meteen mond uitspoelen en veel water drinken. Mond met water spoelen (alleen als de persoon bij bewustzijn is). Onmiddellijk een arts raadplegen.
Symptoms: Braken, Corrosie, Maagperforatie
Immediate Medical Attention
Onmiddellijk een arts raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
IJzer(III) chloride-oplossing 40 %
---
IJzer(III) chloride-oplossing 40 %
UFI: 07V2-10WJ-800E-4P3P
Ijzer(III)chloride, oplossing (40%)
---
Ijzer(III)chloride, oplossing (40%)
---
Ijzer(III)chloride, oplossing (40%)
---
Ijzer(III)chloride ongeveer 40% TECHNICAL aqueous solution
---
IJzer (III) chloride
UFI: 7P9C-J2C5-7X0Q-DFQN
IJzer (II) chloride-tetrahydraat ≥99 %, zuiver
CAS: 13478-10-9
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves. Gloves tested according to EN 374 against chemicals are suitable. It is recommended to check the chemical resistance of the aforementioned safety gloves with the glove supplier for special applications. The times are estimated values from measurements at 22°C and permanent contact. Increased temperatures due to heated substances, body heat, etc., and a reduction in effective layer thickness due to stretching can lead to a significant shortening of the breakthrough time. In case of doubt, contact the manufacturer. With approximately 1.5 times greater/smaller layer thickness, the respective breakthrough time is doubled/halved. The data only applies to the pure substance. When transferred to mixtures of substances, they should only be considered as a guideline. Material type: NBR (Nitrile rubber), Material thickness: 0.3 mm, Breakthrough time: >480 minutes (permeation level: 6). Include rest periods for skin regeneration. Preventive skin protection (skin-protective creams) is recommended.
Wear safety glasses with side protection.
Respiratory protection is necessary for: Aerosol or mist formation. Type: B-P2 (combination filter for acidic gases and particles, color code: grey/white).
Prevent the product from entering drains, surface water, or groundwater.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 2582
- Shipping Name
- Ferric chloride solution
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for IJzer(III) chloride-oplossing 40 %?
The signal word is danger.
What is the physical form of IJzer(III) chloride-oplossing 40 %?
IJzer(III) chloride-oplossing 40 % is a vloeibaar with donkerbruin color. It has scherp odor.
What is the solubility of IJzer(III) chloride-oplossing 40 %?
in elke verhouding mengbaar
What is IJzer(III) chloride-oplossing 40 % used for?
Laboratoriumchemicaliën, Analytische en laboratoriumtoepassingen
What are the hazard statements for IJzer(III) chloride-oplossing 40 %?
This substance has 5 hazard statements:
- H290: Kan bijtend zijn voor metalen
- H302: Schadelijk bij inslikken
- H315: Veroorzaakt huidirritatie
- H317: Kan een allergische huidreactie veroorzaken
- H318: Veroorzaakt ernstig oogletsel
What is the melting point of IJzer(III) chloride-oplossing 40 %?
The melting point is -12 C and the boiling point is niet bepaald.