Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Formaldehyde-oplossing 4%, gebufferd, pH 6,9 (circa 10% formaline-oplossing) voor histologie
- Product Code
- 1.00496
- Chemical Name
- Formaldehyde-oplossing
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Dit product is een mengsel. REACH registratienummer zie hoofdstuk 3.
Identified Uses
In-vitrodiagnosticum, Reagens voor analyse
Uses advised against
Dit product is niet bestemd voor huishoudelijk gebruik.
Manufacturers & Suppliers
Millipore
distributor
Merck Life Science BV/SRL
manufacturer
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inademen: frisse lucht. Direct een arts waarschuwen. Bij ademstilstand: Meteen mechanische beademing, eventueel zuurstof toedienen.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen. Een arts raadplegen.
Na oog contact: uitspoelen met ruim voldoende water. Oogarts raadplegen. Contactlenzen uitnemen.
Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Formaldehyde-oplossing 4%, gebufferd, pH 6,9 (circa 10% formaline-oplossing) voor histologie
---
Formaldehyde-oplossing 4%, gebufferd voor histologie
---
Formaldehyde-oplossing min. 37% zuurvrij gestabiliseerd met ca. 10% methanol en calciumcarbonaat, voor histologie
---
Formaldehyde-oplossing min. 37% zuurvrij gestabiliseerd met ca. 10% methanol en calciumcarbonaat, voor histologie
---
Formaldehyde-oplossing ≥35 %, DAB, voor histologie
---
Formaldehyde 4% oplossing in water, gebufferd Formalin 10%
---
Formaldehyde 4% oplossing in water, gebufferd KLINIPATH® Formalin 10%
CAS: 50-00-0
Formaldehyde 4% oplossing in water, gebufferd KLINIPATH® Formalin 10%
CAS: 50-00-0
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Full contact: Material: Nitrile rubber, Minimum layer thickness: 0.11 mm, Breakthrough time: > 480 min, Tested material: KCL 741 Dermatril® L. Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0.11 mm, Breakthrough time: > 480 min, Tested material: KCL 741 Dermatril® L. Recommendations are for the product mentioned in the safety data sheet for specified applications. For solutions/mixtures or other conditions than EN 16523-1, contact the supplier of CE-approved gloves.
Use face and/or eye protection tested and approved by official institutions such as NIOSH (US) or EN166 (EU). Safety glasses.
Needed if vapors/aerosols are formed. Recommended filter type: Filter type ABEK. Recommendations for respiratory protection filtering are based on DIN EN 143, DIN 14387 and other applicable standards. The employer must ensure maintenance, cleaning, and testing of respiratory protective devices are carried out according to supplier's instructions and documented.
Protective clothing.
Do not allow product to enter sewage system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Not dangerous goods
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Formaldehyde-oplossing 4%, gebufferd, pH 6,9 (circa 10% formaline-oplossing) voor histologie?
The signal word is danger.
What is the physical form of Formaldehyde-oplossing 4%, gebufferd, pH 6,9 (circa 10% formaline-oplossing) voor histologie?
Formaldehyde-oplossing 4%, gebufferd, pH 6,9 (circa 10% formaline-oplossing) voor histologie is a vloeibaar with kleurloos color. It has kenmerkend odor.
What is Formaldehyde-oplossing 4%, gebufferd, pH 6,9 (circa 10% formaline-oplossing) voor histologie used for?
In-vitrodiagnosticum, Reagens voor analyse
What are the hazard statements for Formaldehyde-oplossing 4%, gebufferd, pH 6,9 (circa 10% formaline-oplossing) voor histologie?
This substance has 4 hazard statements:
- H302 + H332: Schadelijk bij inslikken en bij inademing.
- H317: Kan een allergische huidreactie veroorzaken.
- H341: Verdacht van het veroorzaken van genetische schade.
- H350: Kan kanker veroorzaken.
What is the melting point of Formaldehyde-oplossing 4%, gebufferd, pH 6,9 (circa 10% formaline-oplossing) voor histologie?
The melting point is Geen gegevens beschikbaar and the boiling point is circa100 ℃ bij 1.013 hPa.