NextSDS Logo
Safety Data Sheet NL

Formaldehyde-oplossing 4%, gebufferd, pH 6,9 (circa 10% formaline-oplossing) voor histologie

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Formaldehyde-oplossing 4%, gebufferd, pH 6,9 (circa 10% formaline-oplossing) voor histologie
Product Code
100496

Regulatory Identifiers

CAS Number
N/A
REACH No.
Dit product is een mengsel. REACH registratienummer zie hoofdstuk 3.

Identified Uses

In-vitrodiagnosticum, Reagens voor analyse. Meer informatie over het gebruik vindt u op het portaal Merck Chemicals (www.merckgroup.com).

Manufacturers & Suppliers

M

Merck KGaA

manufacturer

64271 Darmstadt, Duitsland

Emergency Contacts

Merck KGaA

+49 6151 722440

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4 H302
Skin Sens. Cat. 1 H317
Muta. Cat. 2 H341
Carc. Cat. 1B H350

GHS Pictograms

GHS08 - Serious health hazard

GHS08

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Schadelijk bij inslikken.
H317 Kan een allergische huidreactie veroorzaken.
H341 Verdacht van het veroorzaken van genetische schade.
H350 Kan kanker veroorzaken.

Precautionary Statements

P201 Alvorens te gebruiken de speciale aanwijzingen raadplegen.
P280 Beschermende handschoenen dragen.
P302 + P352 BIJ CONTACT MET DE HUID: met veel water en zeep wassen.
P308 + P313 NA (mogelijke) blootstelling: een arts raadplegen.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Waterige oplossing van anorganische en organische verbindingen.

Chemical Name CAS Number Concentration Hazardous
formaldehyde 50-00-0 1 - 5% Yes
Methanol 67-56-1 1 - 3% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

frisse lucht. Arts waarschuwen.

Symptoms: irritatie van de slijmvliezen, hoesten en ademnood.

Skin contact

Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen. Een arts raadplegen.

Symptoms: irritatie bij oog- en huidcontact. Ontvettend effect, met vorming van droge en klovende huid. Allergische reactie

Eye contact

uitspoelen met ruim voldoende water. Oogarts raadplegen. Contactlenzen uitnemen.

Symptoms: irritatie bij oog- en huidcontact.

Ingestion

slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Technische maatregelen en geschikte werkprocedures zouden prioriteit moeten hebben boven het gebruik van persoonlijke beschermingsmiddelen. Zie paragraaf 7.1.

Hands

Voor volledig contact: Handschoenenmateriaal: Nitrilrubber, Handschoendikte: 0,11 mm, Doorbraaktijd: > 480 min. Voor spatcontact: Handschoenenmateriaal: Nitrilrubber, Handschoendikte: 0,11 mm, Doorbraaktijd: > 480 min. De te gebruiken beschermende handschoenen moeten voldoen aan de specificaties van EG regeling 89/686/EEG en de daaruit voortkomende norm EN374, bijvoorbeeld KCL 741 Dermatril L (volledig contact), KCL 741 Dermatril L (spat contact). De bovengenoemde doorbraaktijden werden met materiaalproeven van de aanbevolen handschoenen door KCL in laboratoriummetingen volgens EN374 onderzocht. Deze aanbeveling heeft alleen betrekking op het in het veiligheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN374, neem dan contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Eyes

Veiligheidsbril

Respiratory

Nodig indien dampen/aerosolen gevormd worden. Aanbevolen filtertype: filter ABEK. De ondernemer moet ervoor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenterd.

Skin/Body

Beschermende kleding

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Appearance
---
Odor
kenmerkend
Upper Explosive Limit
---
Evaporation Rate
---
Solubility In Water
---
Form
vloeibaar
Flash Point
---
Lower Explosive Limit
---
State Under Standard Conditions
---
Relative Evaporation Rate
---
Odor Threshold
---
Relative Density
---
Softening Point
---
Density
1,017 g/cm3 bij 20
Vapor Density
---
Melting Point
---
Boiling Point
circa 100 bij 1.013 hPa
Partition Coefficient
---
Solubility In Fat
---
Metal Corrosion
---
Explosive Limits
---
Properties Status
---
Colour
kleurloos
Flammability
---
Solidification Point
---
Freezing Point
---
Bulk Density
---
Ph
---
Cloud Point
---
Molecular Weight
---
Physical State Data
liquid
Kinematic Viscosity
---
Solubility
---
Decomposition Temperature
---
Colour Intensity
---
Dynamic Viscosity
---
Auto Ignition Temperature
---
Voc Content
---
Physical State
vloeibaar
Crystallisation Point
---
Vapor Pressure
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Formaldehyde-oplossing 4%, gebufferd, pH 6,9 (circa 10% formaline-oplossing) voor histologie?

The signal word is danger.

What is the physical form of Formaldehyde-oplossing 4%, gebufferd, pH 6,9 (circa 10% formaline-oplossing) voor histologie?

Formaldehyde-oplossing 4%, gebufferd, pH 6,9 (circa 10% formaline-oplossing) voor histologie is a vloeibaar with kleurloos color. It has kenmerkend odor.

What is Formaldehyde-oplossing 4%, gebufferd, pH 6,9 (circa 10% formaline-oplossing) voor histologie used for?

In-vitrodiagnosticum, Reagens voor analyse. Meer informatie over het gebruik vindt u op het portaal Merck Chemicals (www.merckgroup.com).

What are the hazard statements for Formaldehyde-oplossing 4%, gebufferd, pH 6,9 (circa 10% formaline-oplossing) voor histologie?

This substance has 4 hazard statements:

  • H302: Schadelijk bij inslikken.
  • H317: Kan een allergische huidreactie veroorzaken.
  • H341: Verdacht van het veroorzaken van genetische schade.
  • H350: Kan kanker veroorzaken.