NextSDS Logo
Safety Data Sheet NL

Original ATE Brake Fluid SL (DOT 4)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Original ATE Brake Fluid SL (DOT 4)
Product Code
03.9901-58xx.x / 7058xx

Regulatory Identifiers

CAS Number
N/A

Identified Uses

hydraulische vloeistof

Uses advised against

Geen verdere relevante informatie verkrijgbaar.

Manufacturers & Suppliers

C

Continental Aftermarket GmbH

manufacturer

Guerickestr. 7, 60488 Frankfurt a. M.

+49-69-76031

Emergency Contacts

Emergency Contact

+49-6132-84463

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mengsel van na elkaar aangevoerde stoffen met ongevaarlijke bijmengingen.

Chemical Name CAS Number Concentration Hazardous
Ethanol, 2-butoxy-, manufacture of, by-products from EC: 310-287-7 161907-77-3 15% Yes
2,2'-oxydiethanol EC: 203-872-2 111-46-6 10% Yes
1,1'-iminodipropaan-2-ol EC: 203-820-9 110-97-4 2% Yes

Notes

De woordelijke inhoud van de opgegeven aanwijzingen inzake de mogelijke gevaren is te vinden in hoofdstuk 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Frisse lucht toedienen; bij klachten arts ontbieden.

Skin contact

Onmiddellijk met water en zeep afwassen en goed naspoelen.

Eye contact

De ogen gedurende verscheidene minuten onder stromend water afspoelen terwijl de oogspleet geopend blijft. Bij aanhoudende klachten een dokter raadplegen.

Ingestion

Onmiddellijk een dokter bij roepen.

Immediate Medical Attention

Geen verdere relevante informatie verkrijgbaar.

Medical Treatment

Geen verdere relevante informatie verkrijgbaar.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Het handschoenmateriaal moet ondoorlatend en bestand zijn tegen het product / de stof / de bereiding. Kies handschoenmateriaal rekening houdend met de penetratietijden, de permeatiegraden en de degradatie. De keuze van een geschikte handschoen is niet alleen afhankelijk van het materiaal, maar ook van andere kwaliteitskenmerken en verschilt van fabrikant tot fabrikant. Butyl caoutchouc (butyl rubber): minimum doorbraak tijden 180 min; minimale laagdikte: 0,7 mm NBR (nitril rubber): minimale doorbraak tijden 30 min; minimale laagdikte: 0,4 mm De precieze penetratietijd kunt u te weten komen bij de handschoenfabrikant; houd er rekening mee.

Eyes

Veiligheidsbril

Respiratory

Als blootstellingslimieten worden overschreden, gebruik de ademhaling masker (type filter A). Draag selfcontained ademhalingsapparatuur in geval van gevaar van zuurstof verplaatsing.

Environmental

Zie hoofdstuk 6 en 7. Geen verdere maatregelen vereist.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility
---
Properties Status
---
Solidification Point
---
Metal Corrosion
---
Solubility In Water
Volledig mengbaar.
Relative Evaporation Rate
---
Flammability
Niet bruikbaar.
State Under Standard Conditions
---
Melting Point
< -70 C (DIN 51583)
Freezing Point
---
Voc Content
---
Explosive Limits
---
Vapor Density
Niet bepaald.
Density
1,065 g/cm (DIN 51757)
Physical State Data
liquid
Vapor Pressure
< 1 mbar
Partition Coefficient
Niet bepaald.
Appearance
---
Form
Vloeibaar
Molecular Weight
---
Relative Density
Niet bepaald.
Lower Explosive Limit
1,5 Vol % (V)
Crystallisation Point
---
Odor
Karakteristiek
Physical State
Vloeibaar
Kinematic Viscosity
15-17 mm/s (FMVSS 116)
Cloud Point
---
Colour Intensity
---
Odor Threshold
Niet bepaald.
Flash Point
139 C (ASTM D 7094 (closed cup))
Boiling Point
- 260 C (FMVSS 116)
Softening Point
---
Auto Ignition Temperature
- 200 C (DIN 51794)
Ph
8,5 ((FMVSS 116))
Solubility In Fat
---
Upper Explosive Limit
Niet bepaald.
Dynamic Viscosity
Niet bepaald.
Bulk Density
---
Colour
Lichtgeel
Decomposition Temperature
- 360 C (DSC)
Evaporation Rate
Niet bepaald.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
vervalt
Shipping Name
vervalt
Transport Class
vervalt
Packing Group
vervalt
ADR

Niet bruikbaar

IMDG

Niet bruikbaar

IATA

Niet bruikbaar

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Original ATE Brake Fluid SL (DOT 4)?

The signal word is no signal word.

What is the physical form of Original ATE Brake Fluid SL (DOT 4)?

Original ATE Brake Fluid SL (DOT 4) is a vloeibaar with lichtgeel color. It has karakteristiek odor.

What is Original ATE Brake Fluid SL (DOT 4) used for?

hydraulische vloeistof

What is the melting point of Original ATE Brake Fluid SL (DOT 4)?

The melting point is < -70 C (DIN 51583) and the boiling point is - 260 C (FMVSS 116).