Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Interflon Fin Lube TF (Aerosol)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Penetrerende smeerolie
Manufacturers & Suppliers
Interflon b.v.
manufacturer
P.O. Box 1070, NL-4700 BB Roosendaal, The Netherlands
+31(0)165.55.39.11
http://www.interflon.com
Emergency Contacts
Emergency Contact
+32 702.452.45
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mengsel van minerale en synthetische olie, paraffinisch oplosmiddel, Teflon®, additieven en drijfgas.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated light EC: 265-149-8 | 64742-47-8 | 50 - 100% | Yes |
| Naphtha (petroleum), hydrotreated heavy EC: 265-150-3 | 64742-48-9 | 10 - 25% | Yes |
| (Z)-N-methyl-N-(1-oxo-9-octadecenyl)glycine EC: 203-749-3 | 110-25-8 | 2.5% | Yes |
| Amines, C11-14-branched alkyl, monohexyl and dihexyl phosphates EC: 279-632-6 | 80939-62-4 | 1% | Yes |
| polyethylene glycol mono tributylphenyl ether | 9046-09-7 | 1% | Yes |
| Mixture of amine neutralized alkylphosphates | --- | 1% | Yes |
| ethanol, 2,2'-[[3-[(2-hydroxyethyl)amino]propyl]imino]bis-, N-talk-alkylderivaten EC: 291-275-8 | 90367-27-4 | 1% | Yes |
De woordelijke inhoud van de opgegeven aanwijzingen inzake de mogelijke gevaren is te vinden in hoofdstuk 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Frisse lucht toedienen; bij klachten arts ontbieden.
Over het algemeen is het product niet prikkelend voor de huid
Ogen bij geopend ooglid meerdere minuten met stromend water spoelen
Geen braken teweegbrengen en onmiddellijk medische hulp raadplegen.
Immediate Medical Attention
Bij klachten arts ontbieden; onmiddellijk medische hulp raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, zand, bluspoeder. Geen water gebruiken.
Krachtige waterstraal
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Damp of nevel niet inademen. Beschermende kleding aantrekken. Niet beschermde personen op afstand houden.
Bij indringen in afvalwater of riolering moet de bevoegde instantie gewaarschuwd worden. Niet in de riolering/het oppervlaktewater/het grondwater laten terechtkomen.
Met vloeistofbindend materiaal opnemen. Niet met water of waterachtige reinigingsmiddelen wegspoelen.
Materials: zand, bergmeel, zuurbinder, universele binder, zaagmeel
Related Products
Similar products with comparable safety profiles
Interflon Lube TF (Aerosol)
UFI: 0630-90YN-200A-5TCJ
Interflon Lube TF (Aerosol)
UFI: 0630-90YN-200A-5TCJ
Interflon Lube TF (Aerosol)
UFI: 0630-90YN-200A-5TCJ
Interflon Lube TF (Aerosol)
UFI: 0630-90YN-200A-5TCJ
Interflon Lube TF (aerosol)
---
Interflon Fin Lube TF
---
Interflon Fin Lube TF
---
Interflon Lube TF
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Niet spuiten in de richting van een vlam of een gloeiend voorwerp. Houder onder druk. Beschermen tegen de zon en niet blootstellen aan een hogere temperatuur dan 50°C, bijv. door gloeilampen. Ook na gebruik niet doorboren of verbranden.
Op een koele plaats bewaren. Koel en droog bewaren in goed gesloten vaten. Tegen hitte en directe zonnestralen beschermen.
Ontstekingsbronnen op afstand houden - niet roken.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Geen aanvullende gegevens. Zie 7.
Niet noodzakelijk.
Nauw aansluitende veiligheidsbril
Bij onvoldoende ventilatie ademhalingsbescherming. Filter A/P2
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Geen gevaarlijke reacties bekend.
Thermische ontleding: >250°C. Spuitbus: vermijdt zonnestraling, doorboren bus. Olie: vermijdt open vuur, hotspots boven 250°C
Sterke zuren, sterke basen en sterke oxidatoren.
Thermische ontledingsprodukten of verbrandingsresten kunnen koolmonoxide en gedeeltelijk verbrande koolwaterstoffen vrijmaken. (Vanaf 400°C kunnen in geringe mate fluorverbindingen worden vrijgemaakt).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Mag niet tesamen met huisvuil gestort worden of in de riolering terechtkomen.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- SPUITBUSSEN (AEROSOLEN), BRANDBAAR
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Het product is volgens de EG-richtlijnen/GefStoffV (de verordening inzake gevaarlijke stoffen) geclassificeerd en gekenmerkt.
Houder onder druk. Beschermen tegen de zon en niet blootstellen aan een hogere temperatuur dan 50° C. Ook na gebruik niet doorboren of verbranden. Buiten bereik van kinderen bewaren.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Interflon Fin Lube TF (Aerosol)?
The signal word is no signal word.
What is the physical form of Interflon Fin Lube TF (Aerosol)?
Interflon Fin Lube TF (Aerosol) is a aërosol, vloeibaar appearing as troebel geelbruin with troebel geelbruin color. It has olieachtig odor.
What is the solubility of Interflon Fin Lube TF (Aerosol)?
Niet resp. gering mengbaar.
What is Interflon Fin Lube TF (Aerosol) used for?
Penetrerende smeerolie
What are the hazard statements for Interflon Fin Lube TF (Aerosol)?
This substance has 2 hazard statements:
- H229: Houder onder druk.
- Recipiënt staat onder druk.
What is the melting point of Interflon Fin Lube TF (Aerosol)?
The melting point is -43 °C and the boiling point is > 182 °C.