Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Interflon Fin Lube TF (Aerosol)
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Penetrerende smeerolie
Manufacturers & Suppliers
Interflon b.v.
manufacturer
P.O. Box 1070 NL-4700 BB Roosendaal The Netherlands
+31(0)165.55.39.11
http://www.interflon.com
Emergency Contacts
Emergency Contact
+32 702.452.45
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS04
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated light EC: 265-149-8 | 64742-47-8 | 50 - 100% | Yes |
| Naphtha (petroleum), hydrotreated heavy EC: 265-150-3 | 64742-48-9 | 10 - 25% | Yes |
| (Z)-N-methyl-N-(1-oxo-9-octadecenyl)glycine EC: 203-749-3 | 110-25-8 | 1% | Yes |
| Amines, C11-14-branched alkyl, monohexyl and dihexyl phosphates EC: 279-632-6 | 80939-62-4 | 1% | Yes |
| polyethylene glycol mono tributylphenyl ether | 9046-09-7 | 1% | Yes |
| ethanol, 2,2'-[[3-[(2-hydroxyethyl)amino]propyl]imino]bis- | --- | 1% | Yes |
| N-talk-alkylderivaten EC: 291-275-8 | 90367-27-4 | --- | Yes |
De woordelijke inhoud van de opgegeven aanwijzingen inzake de mogelijke gevaren is te vinden in hoofdstuk 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Frisse lucht toedienen; bij klachten arts ontbieden.
Over het algemeen is het produkt niet prikkelend voor de huid
Ogen bij geopend ooglid meerdere minuten met stromend water spoelen
Geen braken teweegbrengen en onmiddellijk medische hulp raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, zand, bluspoeder. Geen water gebruiken.
Krachtige waterstraal
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Damp of nevel niet inademen. Beschermende kleding aantrekken. Niet beschermde personen op afstand houden.
Niet in de riolering/het oppervlaktewater/het grondwater laten terechtkomen.
Niet met water of waterachtige reinigingsmiddelen wegspoelen.
Materials: vloeistofbindend materiaal
Related Products
Similar products with comparable safety profiles
Interflon Fin Lube TF (Aerosol)
---
Interflon Lube TF (Aerosol)
UFI: 0630-90YN-200A-5TCJ
Interflon Lube TF (Aerosol)
UFI: 0630-90YN-200A-5TCJ
Interflon Lube TF (Aerosol)
UFI: 0630-90YN-200A-5TCJ
Interflon Lube TF (Aerosol)
UFI: 0630-90YN-200A-5TCJ
Interflon Lube TF (Aerosol)
UFI: 0630-90YN-200A-5TCJ
Interflon Lube TF (aerosol)
---
Interflon Fin Lube TF
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Niet eten, drinken of roken tijdens het werk. Rokers dienen er voor te zorgen dat Teflon® produkten niet in aanraking komen met tabak of rookwaar.
Op een koele plaats bewaren. De overheidsbepalingen m.b.t. de opslag van drukgaspakkingen moeten in acht genomen worden. Koel en droog bewaren in goed gesloten vaten. Tegen hitte en directe zonnestralen beschermen.
Niet eten, drinken of roken tijdens het werk.
Niet spuiten in de richting van een vlam of een gloeiend voorwerp. Ontstekingsbronnen op afstand houden - niet roken.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Geen aanvullende gegevens. Zie 7.
Veiligheidshandschoenen. Handschoenmateriaal: Nitrielrubber. De keuze van een geschikte handschoen is niet alleen afhankelijk van het materiaal, maar ook van andere kwaliteitskenmerken en verschilt van fabrikant tot fabrikant. Aangezien het product uit meerdere stoffen is samengesteld, is de duurzaamheid van de handschoenmaterialen niet vooraf berekenbaar en moet derhalve vóór het gebruik worden getest. Doordringingstijd van het handschoenmateriaal: De precieze penetratietijd kunt u te weten komen bij de handschoenfabrikant; houd er rekening mee.
Nauw aansluitende veiligheidsbril
Bij onvoldoende ventilatie ademhalingsbescherming.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Geen gevaarlijke reacties bekend.
Thermische ontleding: >250°C. Spuitbus: vermijdt zonnestraling, doorboren bus. Olie: vermijdt open vuur, hotspots boven 250°C
Sterke zuren, sterke basen en sterke oxidatoren.
Thermische ontledingsprodukten of verbrandingsresten kunnen koolmonoxide en gedeeltelijk verbrande koolwaterstoffen vrijmaken. (Vanaf 400°C kunnen in geringe mate fluorverbindingen worden vrijgemaakt).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- SPUITBUSSEN (AEROSOLEN), BRANDBAAR
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Interflon Fin Lube TF (Aerosol)?
The signal word is warning.
What is the physical form of Interflon Fin Lube TF (Aerosol)?
Interflon Fin Lube TF (Aerosol) is a aërosol appearing as troebel geelbruin with troebel geelbruin color. It has olieachtig odor.
What is Interflon Fin Lube TF (Aerosol) used for?
Penetrerende smeerolie
What are the hazard statements for Interflon Fin Lube TF (Aerosol)?
This substance has 2 hazard statements:
- H280: Houder onder druk.
- Voorzichtig! Recipiënt staat onder druk.
What is the melting point of Interflon Fin Lube TF (Aerosol)?
The melting point is -43°C(olie) and the boiling point is > 182°C.