Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOTIP GRAFFITI-EX
- Product Code
- 4110
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Graffitiverwijderaar
Manufacturers & Suppliers
MOTIP DUPLI GmbH
manufacturer
Kurt Vogelsang Strasse 6 D-74855 Hamersheim
+49/6266/75-0
Emergency Contacts
NVIC
030-2748888
24 uur per dag
Belgisch Antigifcentrum
070 245 245
elke dag, 24 op 24 uur
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mengsel van na elkaar aangevoerde stoffen met ongevaarlijke bijmengingen.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| propaan EC: 200-827-9 | 74-98-6 | 5 - 10% | Yes |
| butaan EC: 203-448-7 | 106-97-8 | 5 - 10% | Yes |
| isobutaan EC: 200-857-2 | 75-28-5 | 2.5% | Yes |
De benzeen-gehalte (EINECS-Nr. 200-753-7) ligt in de afzonderlijke componenten onder de 0,1% (Nota P van bijlage I bij Richtlijn 67/548 / EEG). De woordelijke inhoud van de opgegeven aanwijzingen inzake de mogelijke gevaren is te vinden in hoofdstuk 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air; if symptoms occur, call a doctor.
Rinse eyes with running water for several minutes while holding eyelids open.
Drink plenty of water and provide fresh air. Immediately call a doctor.
Immediate Medical Attention
Immediately call a doctor if ingested; if symptoms occur after inhalation, call a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Geen aanvullende gegevens. Zie 7.
Veiligheidshandschoenen. Handschoenen / bestand tegen oplosmiddelen. In case of contact with spray dust protective gloves made of butyl shoud be used (min. 0.4 mm thick), e.g. KCL Camatril, article no. 898 or similar products. Het handschoenmateriaal moet ondoorlatend en bestand zijn tegen het product / de stof / de bereiding. Kies handschoenmateriaal rekening houdend met de penetratietijden, de permeatiegraden en de degradatie. Handschoenmateriaal: Natuurrubber (latex), Butylrubber. Doordringingstijd van het handschoenmateriaal: Butyl rubber gloves with a thickness of 0.4 mm are resistant to: Acetone: 480 min, Butyl acetate: 60 min, Ethyl acetate: 170 min, Xylene: 42 min.
Veiligheidsbril
Niet noodzakelijk.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- SPUITBUSSEN
- Transport Class
- 2
- Packing Group
- vervalt
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOTIP GRAFFITI-EX?
The signal word is danger.
What is the physical form of MOTIP GRAFFITI-EX?
MOTIP GRAFFITI-EX is a arosol with volgens de produktbeschrijving color. It has karakteristiek odor.
What is MOTIP GRAFFITI-EX used for?
Graffitiverwijderaar
What are the hazard statements for MOTIP GRAFFITI-EX?
This substance has 2 hazard statements:
- H222: Zeer licht ontvlambare aerosol.
- H229: Houder onder druk: kan open barsten bij verhitting.
What is the melting point of MOTIP GRAFFITI-EX?
The melting point is Niet bepaald. and the boiling point is Vanwege aerosol niet bruikbaar..