Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RAPID BOND CLEAR 50 ML Part A
- Product Code
- 86856A
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- YD84-60NY-6004-662H
Identified Uses
Kleefmiddel (ENKEL VOOR PROFESSIONEEL EN INDUSTRIEEL GEBRUIK)
Manufacturers & Suppliers
KENT Belux BV
manufacturer
4 Armen-Building, Steenweg op Mechelen 455/8, 1950 Kraainem
KENT Nederland BV
manufacturer
Breda Business Park II, Verlengde Poolseweg 16, NL-4818 CL Breda
Emergency Contacts
Emergency Contact
085 48 68 360
tussen 08.15 en 16.45 uur
Nationaal Vergiftigingen Informatie Centrum (NVIC)
+31 88 75 585 61
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mengsel van na elkaar aangevoerde stoffen met ongevaarlijke bijmengingen.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| methylmethacrylaat EC: 201-297-1 | 80-62-6 | 25 - 50% | Yes |
| 2-hydroxyethylmethacrylaat EC: 212-782-2 | 868-77-9 | 10 - 25% | Yes |
| methacrylzuur EC: 201-204-4 | 79-41-4 | 5 - 10% | Yes |
| 2-ethylhexylmethacrylaat EC: 211-708-6 | 688-84-6 | 5 - 10% | Yes |
| α,α-dimethylbenzylhydroperoxide EC: 201-254-7 | 80-15-9 | 1% | Yes |
| 2,6-di-tert-butyl-p-kresol EC: 204-881-4 | 128-37-0 | 1% | Yes |
De woordelijke inhoud van de opgegeven aanwijzingen inzake de mogelijke gevaren is te vinden in hoofdstuk 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Veel verse lucht aanvoeren en voor alle zekerheid een arts consulteren. Bij bewusteloosheid ligging en vervoer in stabiele zijligging.
Verontreinigde kleding onmiddellijk uittrekken. Onmiddellijk met water en zeep afwassen en goed naspoelen.
Symptoms: Huidirritatie
Ogen met open ooglid een aantal minuten onder stromend water afspoelen en aansluitend arts consulteren.
Mond spoelen. Geen braken teweegbrengen en onmiddellijk bijstand van arts inroepen.
Immediate Medical Attention
Arts consulteren of onmiddellijk bijstand van arts inroepen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, bluspoeder of waternevel. Grotere brand met waternevel of met schuim dat tegen alcohol bestand is bestrijden.
Krachtige waterstraal.
Kan ontplofbaar gas-lucht-mengsel vormen. Bij verhitting of brand is het ontstaan van vergiftige gassen mogelijk.
De aan gevaar blootgestelde tanks met watersproeistraal koelen.
Firefighter Protection
Ontploffings- en brandgassen niet inademen. Adembeschermingsapparaat dragen dat niet afhankelijk is van de omgevingslucht. Volledig beschermende overall aantrekken.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Voor voldoende ventilatie zorgen. Ontstekingsbronnen verwijderd houden. Beschermende kleding aantrekken. Niet beschermde personen op afstand houden.
Niet in de riolering/het oppervlaktewater/het grondwater laten terechtkomen.
Met vloeistofbindend materiaal (zand, bergmeel, zuurbinder, universele binder, zaagmeel) opnemen.
Materials: zand, bergmeel, zuurbinder, universele binder, zaagmeel
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Onstekingsbronnen op afstand houden - niet roken. Maatregelen treffen tegen ontlading van statische elektriciteit.
Op een koele plaats bewaren. Tank op een goed geventileerde plaats bewaren. Koel en droog bewaren in goed gesloten vaten.
Onstekingsbronnen op afstand houden - niet roken.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Zorg voor een goede verluchting/ventilatie
Veiligheidshandschoenen. Draag geschikte handschoenen getest volgens EN 374. Nitrielrubber. Aanbevolen materiaaldikte: ≥ 0.4 mm. Waarde voor de permeatie: Level 3 > 60 minutes.
Schutbril.
Als dit niet voldoende is moet er een ademhalingsbescherming gebruikt worden om het verdampingsniveau onder het niveau van de werkplek te beperken. Filter A (EN 14387)
Draag geschikte beschermende arbeidskleding.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Geen ontleding bij gebruik volgens voorschrift.
Geen verdere relevante informatie verkrijgbaar.
Geen gevaarlijke reacties bekend.
Warmte. Hete oppervlakken. Ontstekingsbronnen. Vlammen
Sterke oxydatiemiddelen, Alkaliën (logen)., Sterke alkaliën
Bij verhitting of brand is het ontstaan van vergiftige gassen mogelijk.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Mag niet tesamen met huisvuil gestort worden of in de riolering komen.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2924
- Shipping Name
- FLAMMABLE LIQUID, CORROSIVE, N.O.S. (methyl methacrylate, methacrylic acid)
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RAPID BOND CLEAR 50 ML Part A?
The signal word is danger.
What is the physical form of RAPID BOND CLEAR 50 ML Part A?
RAPID BOND CLEAR 50 ML Part A is a vloeibaar appearing as vloeistof, viskeus with kleurloos color. It has karakteristiek odor.
What is the solubility of RAPID BOND CLEAR 50 ML Part A?
niet resp. gering mengbaar in water
What is RAPID BOND CLEAR 50 ML Part A used for?
Kleefmiddel (ENKEL VOOR PROFESSIONEEL EN INDUSTRIEEL GEBRUIK)
What are the hazard statements for RAPID BOND CLEAR 50 ML Part A?
This substance has 5 hazard statements:
- H225: Licht ontvlambare vloeistof en damp.
- H314: Veroorzaakt ernstige brandwonden en oogletsel.
- H317: Kan een allergische huidreactie veroorzaken.
- H335: Kan irritatie van de luchtwegen veroorzaken.
- H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of RAPID BOND CLEAR 50 ML Part A?
The melting point is niet bepaald and the boiling point is ~100 °C.