Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Diëthylether voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
- Product Code
- 1.00921
- Chemical Name
- Diëthylether
Regulatory Identifiers
- CAS Number
- 60-29-7 Check regulations →
- REACH No.
- 01-2119535785-29-XXXX
Identified Uses
Reagens voor analyse, Chemische productie
Manufacturers & Suppliers
Merck Life Science BV/SRL
distributor
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Diethylether EC: 200-467-2 | 60-29-7 | 100% | Yes |
Notes
For the full text of H-phrases mentioned in this paragraph, see paragraph 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inademen: frisse lucht. Arts waarschuwen.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen.
Na oog contact: uitspoelen met ruim voldoende water. Contactlenzen uitnemen.
Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.
Immediate Medical Attention
Geen gegevens beschikbaar
Medical Treatment
Geen gegevens beschikbaar
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Diëthylether voor analyse EMSURE® ACS, ISO, Reag. Ph Eur
---
Ethyleenglycol voor analyse EMSURE® Reag. Ph Eur, Reag. USP
---
Dichloormethaan voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 75-09-2
Dichloormethaan voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 75-09-2
Methanol voor analyse EMSURE® ACS, ISO, Reag. Ph Eur
---
Methanol voor analyse EMSURE® ACS, ISO, Reag. Ph Eur
---
Aceton voor analyse EMSURE® ACS, ISO, Reag. Ph Eur
CAS: 67-64-1
Aceton voor analyse EMSURE® ACS, ISO, Reag. Ph Eur
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Specific hand protection requirements include: Material: Viton, Minimum layer thickness: 0.7 mm, Breakthrough time: 30 min. Tested material: Vitoject (KCL 890 / Aldrich Z677698, Size M). This recommendation applies only to the product mentioned in the safety data sheet, for the applications specified by us. If the substance is dissolved in, or mixed with other substances, under conditions other than those mentioned in EN374, please contact the supplier of the CE-approved gloves (e.g., KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Use face and/or eye protection tested and approved by official institutions such as NIOSH (US) or EN166 (EU). Safety glasses.
Needed if vapors/aerosols are formed. Our recommendations for respiratory protection filtering are based on the following standards: DIN EN 143, DIN 14387 and other applicable standards regarding the respiratory protection system used. Recommended filter type: Filter type AX. The employer must ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the supplier's instructions. These measures must be extensively documented.
Flame-retardant, antistatic protective clothing.
Do not allow product to enter sewage system. Risk of explosion.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1155
- Shipping Name
- DIETHYL ETHER
- Transport Class
- 3
- Packing Group
- I
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Diëthylether voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?
The signal word is danger.
What is the physical form of Diëthylether voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?
Diëthylether voor analyse EMSURE® ACS,ISO,Reag. Ph Eur is a vloeibaar with kleurloos color. It has zoet, etherachtig odor.
What is Diëthylether voor analyse EMSURE® ACS,ISO,Reag. Ph Eur used for?
Reagens voor analyse, Chemische productie
What are the hazard statements for Diëthylether voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?
This substance has 3 hazard statements:
- H224: Zeer licht ontvlambare vloeistof en damp.
- H302: Schadelijk bij inslikken.
- H336: Kan slaperigheid of duizeligheid veroorzaken.
What is the melting point of Diëthylether voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?
The melting point is Smeltpunt: -116 C and the boiling point is 34,6 C bij 1.013 hPa.