NextSDS Logo
Safety Data Sheet NL

Di-isopropylether voor analyse EMSURE® ACS,Reag. Ph Eur

CAS 108-20-3

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Di-isopropylether voor analyse EMSURE® ACS,Reag. Ph Eur
Product Code
1.00867
Chemical Name
Di-isopropylether

Regulatory Identifiers

CAS Number
108-20-3 Check regulations →
REACH No.
01-2119548382-38-XXXX

Identified Uses

Reagens voor analyse, Chemische productie

Manufacturers & Suppliers

M

Millipore

distributor

M

Merck Life Science BV/SRL

national supplier

Brusselsesteenweg 288, B-3090 OVERIJSE

+32 (0)3 899-1301

Emergency Contacts

CHEMTREC

+(32) 28 083237

Anti-poison centre

070 245245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
STOT SE Cat. 3 H336

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H225 Licht ontvlambare vloeistof en damp.
H336 Kan slaperigheid of duizeligheid veroorzaken.

Precautionary Statements

P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P233 In goed gesloten verpakking bewaren.
P240 Opslag- en opvangreservoir aarden.
P241 Explosieveilige elektrische/ ventilatie-/ verlichtingsapparatuur gebruiken.
P242 Vonkvrij gereedschap gebruiken.
P243 Maatregelen treffen om ontladingen van statische elektriciteit te voorkomen.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Di-isopropyl ether EC: 203-560-6 108-20-3 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Na inademen: frisse lucht. Arts waarschuwen.

Skin contact

Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen.

Eye contact

Na oog contact: uitspoelen met ruim voldoende water. Contactlenzen uitnemen.

Ingestion

Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Kooldioxide (CO2) Schuim Droogpoeder

Unsuitable media

Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.

Specific hazards

Koolstofoxiden. Brandbaar. Opletten voor vuurterugslag. Dampen zijn zwaarder dan lucht en verspreiden zich mogelijk over de vloer. In geval van brand kunnen er gevaarlijke brandgassen en dampen ontstaan. Vormt ontplofbare mengsels met lucht bij omgevingstemperaturen.

Instructions

Container uit gevaarzone weghalen en koelen met water.

Firefighter Protection

Bij brand een persluchtmasker dragen.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Dampen, aërosol niet inademen. Vermijd contact met de stof. Zorg voor voldoende ventilatie. Verwijderd houden van warmte en ontstekingsbronnen. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.

Environmental

Product niet in de riolering laten komen. Risico op explosie.

Cleanup methods

Met vloeistofabsorberend materiaal, b.v. Chemizorb®, opnemen. Reinig het getroffen oppervlak.

Materials: vloeistofabsorberend materiaal, b.v. Chemizorb®

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Werken onder afzuiging. Stof/mengsel niet inademen. Ontwikkeling van dampen/aerosolen vermijden.

Storage

Beschermd tegen licht. Container goed afgesloten bewaren op een droge en goed geventileerde plaats. Verwijderd houden van warmte en ontstekingsbronnen.

Hygiene

Verontreinigde kleding vervangen. Toepassen van huidbeschermende crème aanbevolen. Na het werken met de stof handen wassen.

Fire prevention

Verwijderd houden van open vuur, hete oppervlakken en ontstekingsbronnen.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Volledig contact: Materiaal: butylrubber, Minimale laagdikte: 0,7 mm, Doorbraaktijd: 480 min, Getest materiaal: Butoject® (KCL 898). Spat contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,4 mm, Doorbraaktijd: 240 min, Getest materiaal: Camatril® (KCL 730 / Aldrich Z677442, Maat M). Deze aanbeveling heeft alleen betrekking op het in het veiligheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN374 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Eyes

beschermbril. Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU).

Respiratory

Aanbevolen filtertype: Filter A (volgens DIN 3181) voor dampen van organische verbindingen. De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.

Skin/Body

Vlamvertragende, antistatische beschermingskleding.

Environmental

Product niet in de riolering laten komen. Risico op explosie.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour Intensity
---
Solubility In Fat
---
Voc Content
---
Vapor Density
---
Softening Point
---
State Under Standard Conditions
---
Appearance
---
Upper Explosive Limit
21 %(V)
Density
0,72 g cm3 bij 20 °C
Decomposition Temperature
---
Explosive Limits
---
Molecular Weight
---
Relative Evaporation Rate
---
Flash Point
-29 °C - gesloten beker
Solubility In Water
3,11 g/l bij 20,2 °C - oplosbaar
Flammability
---
Solidification Point
---
Odor Threshold
---
Cloud Point
---
Crystallisation Point
---
Metal Corrosion
---
Vapor Pressure
227 hPa bij 25 °C, 160 hPa bij 20 °C
Physical State
vloeibaar
Properties Status
---
Melting Point
Smeltpunt/-traject: -85 °C
Colour
kleurloos
Auto Ignition Temperature
---
Odor
Geen gegevens beschikbaar
Solubility
---
Boiling Point
68,5 °C bij 1.013,25 hPa
Dynamic Viscosity
0,33 mPa.s bij 20 °C, 0,24 mPa.s bij 40 °C
Freezing Point
---
Form
---
Relative Density
---
Physical State Data
liquid
Kinematic Viscosity
---
Bulk Density
---
Lower Explosive Limit
1 %(V)
Ph
---
Evaporation Rate
---
Partition Coefficient
log Pow: 2,4 bij 20 °C - Een bio-accumulatie is niet te verwachten.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (kamertemperatuur). Bevat de volgende stabilisator(en): Butylhydroxytolueen (BHT) (0,001 %)

Reactivity

Mogelijk vorming van peroxiden. Dampen kunnen explosief mengsel vormen met lucht.

Hazardous reactions

Exotherme reactie met: Gevaar voor ontploffing met: Aldehyden, Aminen, minerale zuren, Oxidanten, Zink

Avoid

Verwarmend. Vocht.

Incompatible

verscheidene plastics

Decomposition

Peroxiden

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1159
Shipping Name
DIISOPROPYLETHER
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Di-isopropylether voor analyse EMSURE® ACS,Reag. Ph Eur?

The signal word is danger.

What is the physical form of Di-isopropylether voor analyse EMSURE® ACS,Reag. Ph Eur?

Di-isopropylether voor analyse EMSURE® ACS,Reag. Ph Eur is a vloeibaar with kleurloos color. It has geen gegevens beschikbaar odor.

What is Di-isopropylether voor analyse EMSURE® ACS,Reag. Ph Eur used for?

Reagens voor analyse, Chemische productie

What are the hazard statements for Di-isopropylether voor analyse EMSURE® ACS,Reag. Ph Eur?

This substance has 2 hazard statements:

  • H225: Licht ontvlambare vloeistof en damp.
  • H336: Kan slaperigheid of duizeligheid veroorzaken.

What is the melting point of Di-isopropylether voor analyse EMSURE® ACS,Reag. Ph Eur?

The melting point is Smeltpunt/-traject: -85 °C and the boiling point is 68,5 °C bij 1.013,25 hPa.