NextSDS Logo
Safety Data Sheet NL

Silicone IND

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Silicone IND
Product Form
Arosol
Product Code
BDS001830AE

Regulatory Identifiers

CAS Number
N/A
UFI Code
TQXX-0895-200D-FK08

Identified Uses

Professioneel gebruik; smeermiddelen

Manufacturers & Suppliers

CRC Industries Europe B.V. logo

CRC Industries Europe B.V.

national supplier

Touwslagerstraat 1 9240 Zele Belgium

www.crcind.com

Emergency Contacts

Emergency Contact

+32(0)52/45.60.11

9-17h CET

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Skin Irrit. Cat. 2 H315
STOT SE Cat. 3 H336
Asp. Tox. Cat. 1 H304
Aquatic Chronic Cat. 2 H411

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H222 Zeer licht ontvlambare aerosol.
H229 Houder onder druk: kan open barsten bij verhitting.
H315 Veroorzaakt huidirritatie.
H336 Kan slaperigheid of duizeligheid veroorzaken.
H411 Giftig voor in het water levende organismen, met langdurige gevolgen.

Precautionary Statements

P102 Buiten het bereik van kinderen houden.
P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P211 Niet in een open vuur of op andere ontstekingsbronnen spuiten.
P251 Ook na gebruik niet doorboren of verbranden.
P261 Inademing van damp/spuitnevel vermijden.
P271 Alleen buiten of in een goed geventileerde ruimte gebruiken.
P410 + P412 Tegen zonlicht beschermen. Niet blootstellen aan temperaturen boven 50 .
P501 Inhoud/verpakking afvoeren naar een verzamelpunt voor gevaarlijk of speciaal afval, overeenkomstig de lokale, regionale, nationale en/of internationale regelgeving.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Product onderworpen aan CLP Artikel 1.1.3.7. De openbaarmakingsregels van de componenten zijn in dit geval gewijzigd.

Chemical Name CAS Number Concentration Hazardous
Koolwaterstoffen, C6-C7, n-alkanen, isoalkanen, cyclische verbindingen, <5% n-hexaan EC: 921-024-6 --- 25 - 50% Yes
Koolwaterstoffen, C7, iso-alkanen, cyclische EC: 927-510-4 --- 25 - 50% Yes
Kooldioxide (CO2) 124-38-9 1 - 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

De persoon in de frisse lucht brengen en ervoor zorgen dat deze gemakkelijk kan ademen.

Skin contact

De huid met overvloedig water wassen. Verontreinigde kleding uittrekken. Bij huidirritatie: een arts raadplegen.

Symptoms: Irritatie.

Eye contact

Als voorzorgsmaatregel de ogen met water uitspoelen.

Ingestion

Niet laten braken. Onmiddellijk een arts bellen. De mond spoelen. Bij braken het hoofd laag houden, zodat de maaginhoud niet in de longen kan komen.

Symptoms: Risico op longoedeem.

Medical Treatment

Zorg voor algemene ondersteunende maatregelen en behandel symptomatisch.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Er moet een goede algehele ventilatie worden gebruikt. Ventiliatiesnelheden moeten zijn aangepast aan de omstandigheden. Gebruik, indien van toepassing, afgesloten procesruimten, plaatselijke afzuiging of andere technische middelen om de concentraties in de lucht onder de aanbevolen blootstellingslimieten te houden. Wanneer er geen blootstellingslimieten zijn vastgesteld, houd dan de concentraties in de lucht op een aanvaardbaar niveau.

Hands

Draag geschikte handschoenen die getest zijn volgens EN374. De doorbraaktijd van de handschoen moet langer zijn dan de totale duur van het gebruik van het product. Als de werkzaamheden met het product langer duurt dan de doorbraaktijd van de handschoen, moet die tussenin vervangen worden. Handschoenen van nitril zijn aan te bevelen.

Eyes

Oogbescherming gebruiken in overeenstemming met EN 166. Veiligheidsbril met zijkleppen.

Respiratory

Bij ontoereikende ventilatie een geschikt ademhalingsapparaat gebruiken. Goedgekeurd gasmasker voor organische dampen. Type filter: AX

Skin/Body

Draag geschikte beschermende kleding

Environmental

Voorkom lozing in het milieu. Emissies van ventilatie- of procesapparatuur moet worden gecontroleerd om na te gaan dat zij voldoen aan de vereisten van milieubeschermingswetten.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Vloeibaar
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Vloeistof in spuitbus met CO2 drijfgas.
Colour
Kleurloos.
Colour Intensity
---
Form
---
Odor
Oplosmiddel.
Odor Threshold
Niet beschikbaar
Ph
Niet van toepassing
Melting Point
Niet van toepassing
Boiling Point
60 100 C
Flash Point
-26 C (gesloten beker)
Freezing Point
Niet beschikbaar
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
Niet beschikbaar
Vapor Density
---
Relative Density
0,72 bij 20C
Bulk Density
---
Density
0,72 g/cm bij 20C
Flammability
Zeer licht ontvlambare aerosol.
Upper Explosive Limit
Niet beschikbaar
Lower Explosive Limit
Niet beschikbaar
Explosive Limits
---
Auto Ignition Temperature
- 200 C
Decomposition Temperature
Niet beschikbaar
Solubility
Niet oplosbaar in water.
Partition Coefficient
Niet van toepassing
Solubility In Water
Niet oplosbaar in water.
Solubility In Fat
---
Molecular Weight
---
Voc Content
645 g/l
Metal Corrosion
---
Dynamic Viscosity
< 7 mPas bij 40C
Kinematic Viscosity
< 9,722 mm/s
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN 1950
Shipping Name
SPUITBUSSEN (AROSOLEN)
Transport Class
2.1
Packing Group
Niet van toepassing
ADR

Bijzondere bepalingen voor het vervoer - Colli (ADR) : V14, Bijzondere bepalingen voor het vervoer - Laden, lossen en behandeling (ADR) : CV9, CV12, Bijzondere bepalingen voor het vervoer - Bedrijf (ADR) : S2

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Silicone IND?

The signal word is danger.

What is the physical form of Silicone IND?

Silicone IND is a vloeibaar appearing as vloeistof in spuitbus met co2 drijfgas. with kleurloos. color. It has oplosmiddel. odor.

What is the solubility of Silicone IND?

Niet oplosbaar in water.

What is Silicone IND used for?

Professioneel gebruik; smeermiddelen

What are the hazard statements for Silicone IND?

This substance has 5 hazard statements:

  • H222: Zeer licht ontvlambare aerosol.
  • H229: Houder onder druk: kan open barsten bij verhitting.
  • H315: Veroorzaakt huidirritatie.
  • H336: Kan slaperigheid of duizeligheid veroorzaken.
  • H411: Giftig voor in het water levende organismen, met langdurige gevolgen.

What is the melting point of Silicone IND?

The melting point is Niet van toepassing and the boiling point is 60 100 C.

Compliance Scanner

Scan your compliance