NextSDS Logo
Si

Silicone

DANGER Vloeistof in spuitbus met propaan/butaan drijfgas. SDS/MSDS
Chemical Identity

Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Silicone
Product Form
Spuitbus

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
Smeermiddelen

Overview

Silicone is a vloeistof in spuitbus met propaan/butaan drijfgas. substance commonly used smeermiddelen.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

Safety Classification

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Gevaar)

Hazard Classifications

Aerosol Category 1
Skin Irrit. Category 2
Aquatic Chronic Category 3

GHS Hazard Pictograms & Safety Symbols

GHS02 GHS Hazard Pictogram: Flammable hazard - Fire risk materials including gases, liquids, and solids

GHS02

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H222: Zeer licht ontvlambare aerosol.
  • H229: Houder onder druk: kan openbarsten bij verhitting.
  • H315: Veroorzaakt huidirritatie.
  • H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.

Precautionary Statements

  • P102: Buiten het bereik van kinderen houden.
  • P210: Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
  • P211: Niet in een open vuur of op andere ontstekingsbronnen spuiten.
  • P251: Ook na gebruik niet doorboren of verbranden.
  • P280: Beschermende handschoenen/beschermende kleding/oogbescherming/gelaatsbescherming dragen.
  • Tegen zonlicht beschermen. Niet blootstellen aan temperaturen boven 50°C/122°F.
  • Inhoud/verpakking afvoeren naar een erkend afvalinzamelpunt.
Supply Chain

Manufacturers & Suppliers

Authorized suppliers, manufacturers, and distribution network information

CRC Industries Europe bvba

manufacturer

Touwslagerstraat 1 9240 Zele Belgium

BE

+32(0)52/45.00.34

CRC Industries Finland Oy

national supplier

Smedsgatan 3-5 LT4, PL62, 08101 LOJO

FI

+358/(19)32.921

CRC Industries France

national supplier

6, avenue du marais, C.S. 90028, 95102 Argenteuil Cedex

FR

01.34.11.20.00

01.34.11.09.96

CRC Industries Deutschland GmbH

national supplier

Südring 9, D-76473 Iffezheim

DE

(07229) 303 0

(07229)30 32 66

CRC INDUSTRIES IBERIA S.L.U.

national supplier

GREMIO DEL CUERO-PARC.96, POLIGONO INDUSTR. DE HONTORIA, 40195 SEGOVIA

ES

0034/921.427.546

0034/921.436.270

CRC Industries Sweden

national supplier

Laxfiskevägen 16, 433 38 Partille

SE

0046/31 706 84 80

0046/31 27 39 91

Emergency

24/7 Emergency Response

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

CRC Industries Europe

+32(0)52/45.60.11

BE

(kantooruren)

Nationaal vergiftigingen informatie centrum

030 274 88 88

NL

(Uitsluitend voor professionele hulpverleners)

Antigifcentrum

070 - 245 245

BE

Composition

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

mixture

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
koolwaterstoffen, C3-4-rijk,aard-oliedestillaatPetroleumgas (1,3-butadieen < 0.1%)
EC: 270-990-9
68512-91-4 75-100% Hazardous
Koolwaterstoffen, C6, iso-alkanen, < 5% n-hexaan
EC: 254-909-9
N/A 20% Hazardous
First Aid

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

Inhalation Exposure

NA INADEMING: de persoon in de frisse lucht brengen en ervoor zorgen dat deze gemakkelijk kan ademen. Bij onwel voelen een ANTIGIFCENTRUM of een arts raadplegen.

Symptoms:

Overmatige inademing van dampen van oplosmiddel kan misselijkheid, hoofdpijn en duizeligheid veroorzaken.

Skin Contact

Met veel water en zeep wassen. Bij huidirritatie: een arts raadplegen.

Symptoms:

Kan irritatie veroorzaken. Symptomen: roodheid en pijn.

Eye Contact

Als de stof in de ogen komt, onmiddellijk met veel water uitspoelen. Bij aanhoudende oogirritatie: een arts raadplegen.

Symptoms:

Kan irritatie veroorzaken. Symptomen: roodheid en pijn.

Ingestion/Swallowing

Bij inslikken niet laten braken vanwege het risico van inademing in de longen. Als u vermoedt dat dit gebeurd is, onmiddellijk een arts raadplegen.

Symptoms:

Bij inname gevaar voor chemische pneumonie. Symptomen: pijnlijke keel, buikpijn, misselijkheid, braken.

Immediate Medical Attention Required

Bij onwel voelen een ANTIGIFCENTRUM of een arts raadplegen (na inhalatie). Als u vermoedt dat inslikken is gebeurd, onmiddellijk een arts raadplegen. Bij aanhoudende oogirritatie: een arts raadplegen. Bij huidirritatie: een arts raadplegen. Bij blijvende symptomen steeds dokter raadplegen.

Fire Safety

Fire Fighting Measures & Emergency Response

Fire suppression methods, extinguishing media, and firefighting safety procedures

Suitable Extinguishing Media

schuim, kooldioxyde of poeder

Unsuitable Extinguishing Media

Gebruik geen rechtstreekse waterstralen, omdat het risico bestaat dat deze het vuur zouden verspreiden.

Specific Fire Hazards

Spuitbussen kunnen exploderen bij temperaturen boven 50°C

Fire Fighting Instructions

Verpakking(en) die aan het vuur is/zijn blootgesteld koel houden door er water overheen te spuiten

Firefighter Protection Equipment

In geval van brand, inademen van rook vermijden

Spill Response

Accidental Release Measures & Spill Response

Emergency spill cleanup procedures, containment methods, and environmental protection

Emergency Procedures

Alle ontstekingsbronnen afsluiten. Voor voldoende ventilatie zorgen.

Environmental Precautions

Vermijden dat het produkt in openbare riolen of waterlopen terecht komt.

Cleanup Methods

Wanneer er gemorst wordt, dit in inert materiaal absorberen

Cleanup Materials:

inert materiaal

Alternatives

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Section 9

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

Softening Point
Not available
Cloud Point
Not available
Decomposition Temperature
Not available
Crystallisation Point
Not available
Colour
Kleurloos.
Kinematic Viscosity
Not available
Auto Ignition Temperature
> 200 °C
Appearance
Vloeistof in spuitbus met propaan/butaan drijfgas.
Partition Coefficient
Not available
Evaporation Rate
Niet gekend.
Voc Content
545 g/l
Solubility
Not available
Odor
Oplosmiddel.
Solubility In Fat
Not available
Lower Explosive Limit
Niet gekend.
Physical State Data
aerosol
Density
0.700 g/cm3 (@ 20).
Critical Property
Ph
Niet van toepassing.
Explosive Limits
Not available
Boiling Point
Niet gekend.
Critical Property
Solubility In Water
Niet oplosbaar in water
Properties Status
Not available
Flash Point
< 0 °C
Critical Property
Vapor Density
Not available
Colour Intensity
Not available
Odor Threshold
Not available
Freezing Point
Not available
Relative Evaporation Rate
Niet gekend.
Physical State
Vloeistof in spuitbus met propaan/butaan drijfgas.
Critical Property
Solidification Point
Not available
Relative Density
0.700 g/cm3 (@ 20°C).
Molecular Weight
Not available
Form
Vloeistof in spuitbus met propaan/butaan drijfgas.
Metal Corrosion
Not available
Vapor Pressure
Niet gekend.
Melting Point
Not available
Bulk Density
Not available
Upper Explosive Limit
Niet gekend.
State Under Standard Conditions
Not available
Dynamic Viscosity
< 7 mPa.s (@ 40°C).
Flammability
Not available
Handling & Storage

Safe Handling & Storage Procedures

Industrial handling precautions, storage conditions, and workplace safety requirements

Handling Precautions

Het inademen van spuitnevel of damp vermijden.

Bij ontoereikende ventilatie een geschikt ademhalingsbeschuttingsmiddel dragen.

Aanraking met de ogen en de huid vermijden.

Beschermende handschoenen/beschermende kleding/oogbescherming/gelaatsbescherming dragen.

Storage Conditions

Houder onder druk.

Beschermen tegen de zon en niet blootstellen aan een hogere temperatuur dan 50°C.

Buiten bereik van kinderen bewaren.

General Hygiene Measures

Na gebruik grondig wassen

Fire Prevention Measures

Uit de buurt van warmte en van ontstekingsbronnen houden. Uitsluitend vonkvrij gereedschap gebruiken.

Section 8

Exposure Controls & Personal Protective Equipment

Occupational exposure limits, engineering controls, and required safety equipment

Engineering Controls

Voor voldoende ventilatie zorgen Uit de buurt van warmte en van ontstekingsbronnen houden Maatregelen treffen tegen ontladingen van statische elektriciteit

Hand Protection

Afhankelijk van de hoeveelheid en de tijd en het risico op contact met het product, kan de producent van de beschemende handschoenen advies geven bij de selectie van het juiste type materiaal en de doorbraaktijd van de handschoenen. Aanbevolen handschoenen: Nitril

Eye Protection

Draag een nauwaansluitende veiligheidsbril volgens norm EN 166.

Respiratory Protection

Bij ontoereikende ventilatie een geschikt ademhalingsbeschuttingsmiddel dragen. Aanbevolen ademhalingsbescherming: Luchtzuiverend organisch gas/dampmasker (type AX)

Environmental Exposure Controls

Voorkom lozing in het milieu. Gelekte/gemorste stof opruimen.

Section 10

Chemical Stability & Reactivity Data

Chemical stability, hazardous reactions, and incompatible materials information

Chemical Stability

Stabiel

Reactivity

Geen schadelijke reacties bekend indien voor de juiste doeleinden gebruikt

Hazardous Reactions

Geen schadelijke reacties bekend indien voor de juiste doeleinden gebruikt

Conditions to Avoid

Vermijd oververhitting

Incompatible Materials

Sterk oxyderend middel

Hazardous Decomposition Products

CO,CO2

Section 13

Waste Disposal & Treatment Methods

Waste disposal procedures, treatment methods, and regulatory compliance requirements

Waste Treatment Methods

Deze stof en de verpakking op veilige wijze afvoeren. Niet in het riool of het milieu lozen, naar een erkend afvalinzamelpunt brengen.

Product Disposal Recommendations

Deze stof en de verpakking op veilige wijze afvoeren. Niet in het riool of het milieu lozen, naar een erkend afvalinzamelpunt brengen.

Section 14

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

UN Number

1950

Proper Shipping Name

SPUITBUSSEN (AËROSOLEN)

Transport Hazard Class

2.1

Packing Group

Niet van toepassing.

IMDG Maritime Transport Precautions

F-D, S-U

FAQ

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Silicone?

The signal word for this substance is "danger".

What is the physical form of Silicone?

Silicone is a vloeistof in spuitbus met propaan/butaan drijfgas. appearing as vloeistof in spuitbus met propaan/butaan drijfgas. with kleurloos. color. It has oplosmiddel. odor.

What is Silicone used for?

Smeermiddelen

What are the hazard statements for Silicone?

This substance has 4 hazard statements: H222: Zeer licht ontvlambare aerosol. H229: Houder onder druk: kan openbarsten bij verhitting. H315: Veroorzaakt huidirritatie. H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.