Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ORTHO-TDA
- Product Code
- 04243900
- Chemical Name
- 3(of 4)-methylbenzeen-1,2-diamine
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- 01-2119485380-38-0001
Identified Uses
Tussenproduct voor het vervaardigen van polyurethaangrondstoffen
Manufacturers & Suppliers
Covestro Deutschland AG
manufacturer
51365 Leverkusen
+49 214 6009 4068
Emergency Contacts
Chemtrec
+1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
aromatisch diamine mengsel van isomeren
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| methylfenyleendiamine; diaminotolueen; [technisch product reactiemassa van 4-methyl-m-fenyleendiamine (EG-nr. 202-453-1) en 2-meth yl-m-fenyleendiamine (EG-nr. 212-513-9)] EC: 248-145-0 | 26966-75-6 | 100% | Yes |
Notes
Dit product bevat geen zeer risicovolle stoffen in concentraties waarvoor een informatieverplichting geldt (REACH-richtlijn (EG) nr. 1907/2006, artikel 59).
First Aid Measures
Emergency procedures for chemical exposure incidents
Persoon in de frisse lucht brengen, warm houden, laten uitrusten, bij ademhalingsmoeilijkheden is doktershulp vereist.
Symptoms: ademhalingsmoeilijkheden
BIJ CONTACT MET HET HETE PRODUCT: Ontwikkelde productkorsten niet geforceerd of met gebruik van oplosmiddelen van de betroffen huid verwijderen. Voor behandeling van mogelijke brandwonden en voorzichtige reiniging van de huid onmiddellijk arts consulteren. Bij contact met de huid zorgvuldig met veel water en zeep wassen.
Symptoms: mogelijke brandwonden, reacties van de huid
De geopende ogen voldoende lang (minstens 10 minuten) met indien mogelijk lauw water spoelen. Oogarts raadplegen.
NIET laten braken, hulp van een arts vereist.
Immediate Medical Attention
Bij ademhalingsmoeilijkheden is doktershulp vereist. Voor behandeling van mogelijke brandwonden en voorzichtige reiniging van de huid onmiddellijk arts consulteren. Bij reacties van de huid, arts raadplegen. Oogarts raadplegen. Hulp van een arts vereist bij inslikken.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Handling in a fully closed system is recommended to minimize exposure.
Suitable material for safety gloves; EN 374: Heat-resistant gloves made of Kevlar/cotton, resistant up to 100C. Hand protection when handling the product at room temperature: Nitrile rubber - NBR (>= 0.35 mm). Breakthrough time not tested, remove immediately after contamination.
Wear eye/face protection.
Unless the product is handled in a fully closed system, the possible wearing of mouth and nose protection must be considered. In case of released vapors, mouth and nose protection is necessary. Use full mask with filter type ABEK.
Wear suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3257
- Shipping Name
- ELEVATED TEMPERATURE LIQUID, N.O.S. (Toluylenediamine, Molten)
- Transport Class
- 9
- Packing Group
- III
Hete smelt. Gevaar voor verbranding. Milieugevaarlijk. Beschermen tegen vocht. Gescheiden houden van voedingsen genotmiddelen, zuren en logen.
Hete smelt. Gevaar voor verbranding. Milieugevaarlijk. Beschermen tegen vocht. Gescheiden houden van voedingsen genotmiddelen, zuren en logen.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ORTHO-TDA?
The signal word is danger.
What is the physical form of ORTHO-TDA?
ORTHO-TDA is a vloeibaar, hete smelt appearing as vloeibaar, hete smelt with kleurloos tot roze color. It has kenmerkend odor.
What is ORTHO-TDA used for?
Tussenproduct voor het vervaardigen van polyurethaangrondstoffen
What are the hazard statements for ORTHO-TDA?
This substance has 6 hazard statements:
- H302: Schadelijk bij inslikken en bij contact met de huid
- H312: Schadelijk bij inslikken en bij contact met de huid
- H317: Kan een allergische huidreactie veroorzaken.
- H341: Verdacht van het veroorzaken van genetische schade.
- H350: Kan kanker veroorzaken.
- H410: Zeer giftig voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of ORTHO-TDA?
The melting point is 70 C DIN 51566 and the boiling point is 260 C DIN 53171.