Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOTIP INDUSTRIAL BLANKE LAK
- Product Code
- 07242
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Heldere lak
Manufacturers & Suppliers
MOTIP DUPLI GmbH
manufacturer
Kurt Vogelsang Strasse 6, D-74855 Haßmersheim
+49/6266/75-0
Emergency Contacts
NVIC
030-2748888
24 uur per dag
Belgisch Antigifcentrum
070 245 245
elke dag, 24 op 24 uur
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mengsel van na elkaar aangevoerde stoffen met ongevaarlijke bijmengingen.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| aceton EC: 200-662-2 | 67-64-1 | 25 - 50% | Yes |
| propaan EC: 200-827-9 | 74-98-6 | 12.5 - 20% | Yes |
| butaan EC: 203-448-7 | 106-97-8 | 12.5 - 20% | Yes |
| 2-methoxy-1-methylethylacetaat EC: 203-603-9 | 108-65-6 | 5 - 10% | Yes |
| koolwaterstoffen EC: 918-668-5 | --- | 5 - 10% | Yes |
| isobutaan EC: 200-857-2 | 75-28-5 | 5 - 10% | Yes |
| xyleen EC: 215-535-7 | 1330-20-7 | 2.5 - 5% | Yes |
| n-butylacetaat EC: 204-658-1 | 123-86-4 | 2.5 - 5% | Yes |
| ethylbenzeen EC: 202-849-4 | 100-41-4 | 2.5% | Yes |
De benzeen-gehalte (EINECS-Nr. 200-753-7) ligt in de afzonderlijke componenten onder de 0,1% (Nota P van bijlage I bij Richtlijn 67/548 / EEG).
First Aid Measures
Emergency procedures for chemical exposure incidents
Frisse lucht toedienen; bij klachten arts ontbieden.
De ogen gedurende verscheidene minuten onder stromend water afspoelen terwijl de oogspleet geopend blijft. Bij aanhoudende klachten een dokter raadplegen.
Drink zeer veel water en voer verse lucht aan. Onmiddellijk een dokter waarschuwen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Veiligheidshandschoenen Handschoenen / bestand tegen oplosmiddelen In case of contact with spray dust protective gloves made of butyl shoud be used (min. 0.4 mm thick), e.g. KCL Camatril, article no. 898 or similar products Het handschoenmateriaal moet ondoorlatend en bestand zijn tegen het product / de stof / de bereiding. Kies handschoenmateriaal rekening houdend met de penetratietijden, de permeatiegraden en de degradatie. Handschoenmateriaal: Natuurrubber (latex), Butylrubber Doordringingstijd van het handschoenmateriaal: Butyl rubber gloves with a thickness of 0.4 mm are resistant to: Acetone: 480 min Butyl acetate: 60 min Ethyl acetate: 170 min Xylene: 42 min
Veiligheidsbril
Bij goede ventilatie niet noodzakelijk. Anders filter klasse A / P 2 of zelf-onafhankelijk.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- SPUITBUSSEN
- Packing Group
- vervalt
Waarschuwing: Gassen
Waarschuwing: Gassen
Waarschuwing: Gassen
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOTIP INDUSTRIAL BLANKE LAK?
The signal word is danger.
What is MOTIP INDUSTRIAL BLANKE LAK used for?
Heldere lak
What are the hazard statements for MOTIP INDUSTRIAL BLANKE LAK?
This substance has 5 hazard statements:
- H222: Zeer licht ontvlambare aerosol.
- H229: Houder onder druk: kan open barsten bij verhitting.
- H319: Veroorzaakt ernstige oogirritatie.
- H336: Kan slaperigheid of duizeligheid veroorzaken.
- H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of MOTIP INDUSTRIAL BLANKE LAK?
The melting point is Niet bepaald. and the boiling point is Vanwege aerosol niet bruikbaar..