NextSDS Logo
Safety Data Sheet NL

IPE 744

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
IPE 744

Regulatory Identifiers

CAS Number
N/A
UFI Code
EMPH-FRGE-5127-HJWC

Identified Uses

Verharder voor epoxy giethars.

Uses advised against

Niet geschikt voor "Doe-Het-Zelf". Alleen voor industrieel gebruik.

Manufacturers & Suppliers

ASSYST bvba / A.S.O.W. bvba logo

ASSYST bvba / A.S.O.W. bvba

distributor

Hellegatstraat 13a, 2590 Berlaar, België

+32 495 50 61 14 / +32 496 83 70 27

www.assyst.org / www.artsuppliesonweb.com

Emergency Contacts

Antigifcentrum

070 245 245

Antigifcentrum

02 264 96 30

Europees noodnummer

112

Nationaal Vergiftigingen Informatie Centrum (NVIC)

030-274 8888

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4
Acute Tox. Cat. 4
Skin Corr. Cat. 1A
Eye Dam. Cat. 1
Aquatic Chronic Cat. 2

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H302 + H312 Schadelijk bij inslikken en bij aanraking met de huid.
H314 Veroorzaakt ernstige brandwonden en oogletsel.
H411 Vergiftig voor in het water levende organismen, met langdurige gevolgen.

Precautionary Statements

P264 Was het gereedschap grondig na gebruik.
P273 Voorkom lozing in het milieu.
P280 Draag beschermende handschoenen/kleding en een beschermingsmiddel voor de ogen/het gezicht.
P303 + P361 + P353 BIJ CONTACT MET DE HUID (of het haar): Verontreinigde kleding onmiddellijk uittrekken. Huid spoelen met water of douche.
P305 + P351 + P338 BIJ CONTACT MET DE OGEN: voorzichtig spoelen met water gedurende enkele minuten. Contactlenzen verwijderen, indien aanwezig en gemakkelijk te doen. Blijf spoelen.
P310 Bel onmiddellijk een ANTIGIFCENTRUM of een arts.
P391 Morsingen opvangen.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Gevaarlijke bestanddelen in de zin van de CLP-verordening en de bijbehorende indeling:

Chemical Name CAS Number Concentration Hazardous
Propylidynetrimethanol, gepropoxyleerd, reactieproducten met ammoniak EC: 500-105-6 39423-51-3 80% Yes

Notes

Voor uitleg van afkortingen zie hoofdstuk 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Breng het slachtoffer in de frisse lucht en houd het warm en rustig.

Skin contact

Trek onmiddellijk alle besmette kleding uit. HAAL ONMIDDELLIJK MEDISCHE HULP. Verontreinigde kleding onmiddellijk uittrekken en veilig afvoeren. Na contact met de huid onmiddellijk wassen met zeep en veel water.

Eye contact

Na contact met de ogen, voldoende lang spoelen met water met de oogleden open, daarna onmiddellijk een oogarts raadplegen. Bescherm het onbeschadigde oog.

Ingestion

GEEN braken opwekken. Geef niets te eten of te drinken.

Immediate Medical Attention

HAAL ONMIDDELLIJK MEDISCHE HULP. In geval van ongeval of indien men zich onwel voelt, onmiddellijk een arts raadplegen.

Medical Treatment

Geen enkele.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2 of droge chemische brandblusser.

Unsuitable media

Geen enkele in het bijzonder.

Specific hazards

Adem geen explosie- of verbrandingsgassen in. Verbranding produceert zware rook.

Instructions

Verplaats onbeschadigde containers uit de directe gevarenzone als dat veilig kan.

Firefighter Protection

Gebruik geschikte ademhalingsapparatuur.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Draag persoonlijke beschermingsmiddelen. Breng personen in veiligheid.

Environmental

Niet in de bodem/ondergrond laten komen. Niet in het oppervlaktewater of het riool laten terechtkomen. Besmet waswater bewaren en afvoeren.

Cleanup methods

Wassen met veel water.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Vermijd contact met de huid en ogen, inademing van dampen en nevels. Gebruik geen lege containers voordat ze zijn schoongemaakt. Alvorens over te brengen, dient u zich ervan te vergewissen dat er zich geen resten van onverenigbaar materiaal in de containers bevinden.

Storage

Bewaar op een koele plaats en beschermd tegen vochtigheid in een gesloten originele verpakking.

Hygiene

Besmette kleding moet worden vervangen voordat men de eetzaal betreedt. Niet eten of drinken tijdens het werk.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Geen enkele.

Hands

Bescherm uw handen met handschoenen van categorie I (ref. Richtlijn 89/686/EEG en norm EN 374).

Eyes

Draag een veiligheidsbril (ref. norm EN 166).

Respiratory

Geschikte beschermende ademhalingsapparatuur gebruiken. (Ref. Dir. 89/686/EEG, zoals gewijzigd - UNI PROTECTED / 1998 - UNI EN 529/2006).

Skin/Body

Veiligheidsschoenen. Draag werkkleding met lange mouwen en veiligheidsschoeisel voor professioneel gebruik van categorie I (REF. Richtlijn 89/686/EEG en EN 344).

Environmental

Voorkom dat het in riolen, kelders of andere plaatsen terechtkomt waar de ophoping ervan gevaarlijk kan zijn.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Vloeibaar
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Kleurloos
Colour Intensity
---
Form
---
Odor
Ammoniakaal
Odor Threshold
---
Ph
12
Melting Point
-19°C
Boiling Point
>100°C
Flash Point
>200°C
Freezing Point
-19°C
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
6,8hPa (20°C)
Vapor Density
---
Relative Density
0,96 g/ml (25°C)
Bulk Density
---
Density
0,96 g/ml (25°C)
Flammability
>100°C
Upper Explosive Limit
Niet relevant
Lower Explosive Limit
Niet relevant
Explosive Limits
---
Auto Ignition Temperature
>300°C
Decomposition Temperature
>200°C
Solubility
---
Partition Coefficient
Niet relevant
Solubility In Water
N.A.
Solubility In Fat
Niet relevant
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
108 cps (25°C)
Kinematic Viscosity
Niet relevant
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Het product is stabiel bij normaal gebruik en opslag.

Reactivity

Onder normale gebruiksomstandigheden zijn er geen bijzondere risico's van reactie met andere stoffen.

Hazardous reactions

Geen enkele.

Avoid

Stabiel onder normale omstandigheden.

Incompatible

Geen enkele in het bijzonder.

Decomposition

Geen enkele.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Herstel, indien mogelijk. Verzending naar erkende verwijderingsinstallaties of voor gecontroleerde verbranding.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3082
Shipping Name
VLOEISTOF GEVAARLIJK VOOR HET MILIEU, N.E.G. (mengsel dat trimethylolpropaan-polyoxipropylentriamine bevat)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for IPE 744?

The signal word is danger.

What is the physical form of IPE 744?

IPE 744 is a vloeibaar with kleurloos color. It has ammoniakaal odor.

What is IPE 744 used for?

Verharder voor epoxy giethars.

What are the hazard statements for IPE 744?

This substance has 3 hazard statements:

  • H302 + H312: Schadelijk bij inslikken en bij aanraking met de huid.
  • H314: Veroorzaakt ernstige brandwonden en oogletsel.
  • H411: Vergiftig voor in het water levende organismen, met langdurige gevolgen.

What is the melting point of IPE 744?

The melting point is -19°C and the boiling point is >100°C.