Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Waterstofperoxide 30% (Perhydrol®) voor analyse EMSURE® ISO
- Product Code
- 107209
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Dit product is een mengsel. REACH registratienummer zie hoofdstuk 3.
Identified Uses
Reagens voor analyse
Manufacturers & Suppliers
Merck KGaA
manufacturer
64271 Darmstadt, Duitsland
+49 6151 72-2440
Emergency Contacts
Merck KGaA
+49 6151 722440
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Waterige oplossing
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Waterstofperoxide | 7722-84-1 | 25 - 35% | Yes |
Notes
De veiligheidsinformatiebladen van de catalogusartikelen staan ter beschikking op www.merck-chemicals.com
First Aid Measures
Emergency procedures for chemical exposure incidents
frisse lucht.
met ruim voldoende water afspoelen. Verontreinigde kleding verwijderen.
Symptoms: Irritatie en corrosie
uitspoelen met ruim voldoende water. Onmiddellijk een oogarts raadplegen.
Symptoms: Irritatie en corrosie, bindvliesontsteking Gevaar voor ernstig oogletsel.
slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.
Symptoms: Duizeligheid, Bewusteloosheid, Diarree, Misselijkheid, Braken, Hoofdpijn, Stuiptrekkingen, spiertrillingen, slapeloosheid, shock, Irritatie en corrosie
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Waterstofperoxide 30% (Perhydrol®) voor analyse EMSURE® ISO
---
Waterstofperoxide 30% (Perhydrol®) voor analyse EMSURE® ISO
UFI: 9VPX-658R-V99Q-9WPY
Waterstofperoxide 30% (Perhydrol TM) voor analyse EMSURE® ISO
UFI: 9VPX-658R-V99Q-9WPY
Waterstofperoxide in oplossing 30 %
---
Salpeterzuur 65% voor analyse EMSURE® ISO
---
Salpeterzuur 65% voor analyse EMSURE® ISO
---
Zwavelzuur 25% voor analyse EMSURE®
---
Zwavelzuur 25% voor analyse EMSURE®
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technische maatregelen en geschikte werkprocedures zouden prioriteit moeten hebben boven het gebruik van persoonlijke beschermingsmiddelen. Zie paragraaf 7.1.
Voor volledig contact: Handschoenenmateriaal: Natuurlijk latex, Handschoendikte: 0,6 mm, Penetratietijd: > 480 min. Voor spatcontact: Handschoenenmateriaal: Nitrilrubber, Handschoendikte: 0,11 mm, Penetratietijd: > 30 min. De te gebruiken beschermende handschoenen moeten voldoen aan de specificaties van EG regeling 89/686/EEG en de daaruit voortkomende norm EN374, bij voorbeeld KCL 706 Lapren (volledig contact), KCL 741 Dermatril L (spat contact).
Nauw aansluitende veiligheidsstofbril
Nodig indien dampen/aerosolen gevormd worden. Aanbevolen filtertype: filter NO. De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.
Beschermende kleding. Het soort lichaamsbescherming moet al naargelang van de concentratie en de hoeveelheid gevaarlijke stoffen op de werkplek gekozen worden. De chemische weerstand van de bescherming moet met de leverancier geregeld worden.
Afval niet in de gootsteen werpen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 2014
- Shipping Name
- Waterstofperoxide, oplossing in water
- Transport Class
- 5.1 (8)
- Packing Group
- II
ja
ja
ja
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Waterstofperoxide 30% (Perhydrol®) voor analyse EMSURE® ISO?
The signal word is danger.
What is the physical form of Waterstofperoxide 30% (Perhydrol®) voor analyse EMSURE® ISO?
Waterstofperoxide 30% (Perhydrol®) voor analyse EMSURE® ISO is a vloeibaar with kleurloos color. It has licht odor.
What is Waterstofperoxide 30% (Perhydrol®) voor analyse EMSURE® ISO used for?
Reagens voor analyse
What are the hazard statements for Waterstofperoxide 30% (Perhydrol®) voor analyse EMSURE® ISO?
This substance has 2 hazard statements:
- H302: Schadelijk bij inslikken.
- H318: Veroorzaakt ernstig oogletsel.
What is the melting point of Waterstofperoxide 30% (Perhydrol®) voor analyse EMSURE® ISO?
The melting point is -26 C and the boiling point is 107 C bij 1.013 hPa.