NextSDS Logo
Safety Data Sheet NL

INOVYN™ PVC - Suspension PVC

CAS 9002-86-2
EC 618-338-8

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
INOVYN™ PVC - Suspension PVC
Product Code
S8060
Chemical Name
HOMOPOLYMEER-HARS VAN VINYLCHLORIDE
Synonyms
polyvinylchloride

Regulatory Identifiers

CAS Number
9002-86-2 Check regulations →
EC Number
618-338-8 Check regulations →

Identified Uses

Wordt zowel gebruikt in stijve als soepele buizen, in profielen, schuim, verpakking, spuitgietvormen, in gekalandeerde folie, in film- en vloerbedekkingsproducten, als ook in kabelisolatie en -bekleding etc.

Uses advised against

Geen.

Manufacturers & Suppliers

I

INOVYN Europe Limited

manufacturer

Bankes Lane Office, Bankes Lane, PO Box 9, Runcorn, Cheshire, WA7 4JE

+44 (0)1928 561111

I

INOVYN Europe Limited, Succursale Belge

manufacturer

Avenue des Olympiades 20, 1140 Bruxelles, Belgique

+32 (0)2 362 9711

Emergency Contacts

CareChem

+44(0)1235 239 670

Belgisch Vergiftigingencentrum

+00 327 024 52 45

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Polyvinylchloride

Chemical Name CAS Number Concentration Hazardous
Polyvinylchloride EC: 618-338-8 9002-86-2 99% No

Notes

INOVYN™ PVC klassen kunnen sporen van vinylchloride monomeer (VCM) bevatten. VCM is gasvormig en kan langzaam in de omgeving vrijkomen. Zo een uitstoot in de lucht nabij een productiebedrijf zal enkel sporen van VCM bevatten waarvan de concentratie aanzienlijk lager is dan de aangegeven limieten.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Bij ademhalingsmoeilijkheden het slachtoffer in de frisse lucht brengen en laten rusten in een houding die het ademen vergemakkelijkt.

Symptoms: Hoge stofconcentraties kunnen irriterend zijn voor de luchtwegen.

Skin contact

Huid spoelen met water en zeep.

Symptoms: Kan schaafwonden veroorzaken na contact met huid en ogen.

Eye contact

Spoel de ogen met water gedurende tenminste 15 minuten.

Symptoms: Kan schaafwonden veroorzaken na contact met huid en ogen.

Ingestion

Mond laten spoelen met water. Geen braken opwekken.

Immediate Medical Attention

Indien ziekteverschijnselen optreden: onmiddellijk een arts raadplegen. Waarschijnlijk niet vereist, maar indien nodig: symptomen behandelen.

Medical Treatment

Waarschijnlijk niet vereist, maar indien nodig: symptomen behandelen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Zorg dragen voor toereikende ventilatie. De concentraties op de werkplek toetsen aan de bedrijfshygiënische grenswaarde.

Eyes

Draag geschikte bescherming van de ogen/het gezicht. Als er stof waarschijnlijk worden gegenereerd: Volledig aansluitende veiligheidsbril.

Respiratory

Normaal geen persoonlijke adembescherming nodig is. Een goedgekeurd stofmasker dragen indien tijdens gebruik stofvorming optreedt. Een geschikt stofmasker of stof adem bescherming met filter type P (EN143 of EN405) kunnen nodig zijn.

Skin/Body

Geen speciale vereisten.

Environmental

Laat geen grote hoeveelheden vrij in het oppervlaktewater of in de riolering.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Odor
Reukloos.
State Under Standard Conditions
---
Solidification Point
---
Partition Coefficient
Niet van toepassing.
Auto Ignition Temperature
450 °C (in laag); 650 °C (verspreid)
Voc Content
---
Colour Intensity
---
Dynamic Viscosity
Niet van toepassing.
Melting Point
Niet van toepassing. Glasovergangstemperatuur
Vapor Pressure
Niet van toepassing.
Flammability
Neergeslagen stof is zwak ontvlambaar en is niet vlamonderhoudend. Verbrandingsklasse: BZ1 (geen ontsteking)
Physical State
Poeder.
Flash Point
Niet van toepassing.
Freezing Point
---
Properties Status
---
Colour
Kleurloos.
Evaporation Rate
Niet van toepassing.
Kinematic Viscosity
Niet van toepassing.
Decomposition Temperature
≥120 °C (ongeveer 3 uur blootstellen), >250 °C (korte blootstelling)
Boiling Point
Niet van toepassing.
Metal Corrosion
Niet corrosief
Ph
Niet van toepassing.
Cloud Point
---
Softening Point
---
Form
---
Bulk Density
---
Crystallisation Point
---
Odor Threshold
Niet vastgesteld.
Solubility
Oplosbaarheid (Water) : Insoluble Oplosbaarheid (Andere stoffen) : Oplosbaar in: cyclohexanon, tetrahydrofuraan, 1,2-Dichloorethaan
Physical State Data
solid
Density
0.3 – 0.65
Lower Explosive Limit
Geen gegevens.
Solubility In Fat
---
Explosive Limits
---
Solubility In Water
Insoluble
Relative Density
1.4
Appearance
---
Molecular Weight
>10000 g/mol
Relative Evaporation Rate
---
Vapor Density
---
Upper Explosive Limit
Geen gegevens.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Niet van toepassing
Shipping Name
Niet van toepassing
Transport Class
Niet van toepassing
Packing Group
Niet van toepassing
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is INOVYN™ PVC - Suspension PVC known by?

INOVYN™ PVC - Suspension PVC is also known as: polyvinylchloride

What is the hazard signal word for INOVYN™ PVC - Suspension PVC?

The signal word is no signal word.

What is the physical form of INOVYN™ PVC - Suspension PVC?

INOVYN™ PVC - Suspension PVC is a poeder. with kleurloos. color. It has reukloos. odor.

What is the solubility of INOVYN™ PVC - Suspension PVC?

Oplosbaarheid (Water) : Insoluble Oplosbaarheid (Andere stoffen) : Oplosbaar in: cyclohexanon, tetrahydrofuraan, 1,2-Dichloorethaan

What is INOVYN™ PVC - Suspension PVC used for?

Wordt zowel gebruikt in stijve als soepele buizen, in profielen, schuim, verpakking, spuitgietvormen, in gekalandeerde folie, in film- en vloerbedekkingsproducten, als ook in kabelisolatie en -bekleding etc.

What is the melting point of INOVYN™ PVC - Suspension PVC?

The melting point is Niet van toepassing. Glasovergangstemperatuur and the boiling point is Niet van toepassing..

Compliance Scanner

Scan your compliance