Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
- Product Code
- 101145
Regulatory Identifiers
- CAS Number
- 12125-02-9 Check regulations →
- REACH No.
- 01-2119489385-24-XXXX
Identified Uses
Reagens voor analyse
Manufacturers & Suppliers
Merck KGaA
manufacturer
64271 Darmstadt, Duitsland
+49 6151 72-2440
Emergency Contacts
Merck KGaA
+49 6151 722440
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ammoniumchloride EC: 235-186-4 | 12125-02-9 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inhalatie: frisse lucht.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen.
Na oog contact: uitspoelen met ruim voldoende water. Oogarts raadplegen. Contactlenzen uitnemen.
Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.
Symptoms: lokale prikkelingsverschijnselen, misselijkheid, braken, diarrhee. Systemische effect: na opname van zeer grote hoeveelheden:: daling van de bloeddruk, collaps, storingen van het CZS, krampen, narcotische toestanden, ademhalingsstilstand, hemolyse.
Immediate Medical Attention
Een arts raadplegen. Oogarts raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Gebruik blusmiddelen die geschikt zijn voor de plaatselijke omstandigheden en de omgeving.
Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.
Niet brandbaar. Door brand in de omgeving is het ontstaan van gevaarlijke dampen mogelijk.
Gassen/dampen/nevels neerslaan met behulp van een watersproeistraal.
Firefighter Protection
Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Vermijd contact met de stof. Noodprocedures volgen, een deskundige raadplegen.
Droog opnemen.
Related Products
Similar products with comparable safety profiles
Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 12125-02-9
Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 12125-02-9
Ammoniumchloride voor analyse EMSURE® ACS, ISO, Reag. Ph Eur
---
Ammoniumchloride voor analyse EMSURE® ACS, ISO, Reag. Ph Eur
---
Ammoniumacetaat voor analyse EMSURE® ACS, Reag. Ph Eur
---
Ammoniumacetaat voor analyse EMSURE® ACS, Reag. Ph Eur
---
Ammoniumsulfaat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 7783-20-2
Ammoniumnitraat voor analyse EMSURE® ACS
CAS: 6484-52-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Voorzorgsmaatregelen op het etiket naleven.
Goed afgesloten. Droog. Aanbevolen bewaartemperatuur, zie productlabel.
Verontreinigde kleding vervangen. Toepassen van huidbeschermende crème aanbevolen. Na het werken met de stof handen wassen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technische maatregelen en geschikte werkprocedures zouden prioriteit moeten hebben boven het gebruik van persoonlijke beschermingsmiddelen. Zie paragraaf 7.1.
Handschoenenmateriaal: Nitrilrubber; Handschoendikte: 0,11 mm; Doorbraaktijd: > 480 min; Normen: EG regeling 89/686/EEG en EN374; Voorbeelden: KCL 741 Dermatril® L (volledig contact), KCL 741 Dermatril® L (spat contact).
Veiligheidsbril
nodig indien stofvorming plaatsvindt. Aanbevolen filtertype: Filter P 2 (volgens DIN 3181) voor vaste en vloeibare deeltjes van schadelijke stoffen
beschermende kleding
Afval niet in de gootsteen werpen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
sublimeerbaar
Zie paragraaf 10.3.
Heftige reacties mogelijk met: alkalihydroxiden, zuren. Kans op ontbranding of vorming van brandbare gassen of dampen met: halogeen-halogeen verbindingen, basisch afval, alkaline stoffen. Gevaar voor ontploffing met: nitraten, chloraten, Zware metaalzouten, nitrieten, Cyaanwaterstof (Blauwzuur), Chloor, zilverzout, Sterke oxidatiemiddelen
geen informatie beschikbaar
Aluminium, Lood, IJzer, Koper, koperverbindingen
bij brand: Zie hoofdstuk 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?
The signal word is warning.
What is the physical form of Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?
Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur is a solid with wit color. It has reukloos odor.
What is Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur used for?
Reagens voor analyse
What are the hazard statements for Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?
This substance has 2 hazard statements:
- H302: Schadelijk bij inslikken.
- H319: Veroorzaakt ernstige oogirritatie.
What is the melting point of Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?
The melting point is 338 °C and the boiling point is Niet van toepassing.