NextSDS Logo
Safety Data Sheet NL

Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur

CAS 12125-02-9

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
Product Code
1.01145
Chemical Name
Ammoniumchloride

Regulatory Identifiers

CAS Number
12125-02-9 Check regulations →
REACH No.
01-2119489385-24-XXXX

Identified Uses

Reagens voor analyse

Manufacturers & Suppliers

M

Millipore

distributor

M

Merck Life Science BV/SRL

distributor

Brusselsesteenweg 288, B-3090 OVERIJSE

+32 (0)3 899-1301

Emergency Contacts

CHEMTREC

+(32) 28 083237

Anti-poison centre

070 245245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Schadelijk bij inslikken.
H319 Veroorzaakt ernstige oogirritatie.

Precautionary Statements

P264 Na het werken met dit product de huid grondig wassen.
P280 Draag oogbescherming/ gelaatsbescherming.
P301 + P312 NA INSLIKKEN: bij onwel voelen een ANTIGIFCENTRUM/ arts raadplegen.
P305 + P351 + P338 BIJ CONTACT MET DE OGEN: voorzichtig afspoelen met water gedurende een aantal minuten; contactlenzen verwijderen, indien mogelijk; blijven spoelen.
P337 + P313 Bij aanhoudende oogirritatie: een arts raadplegen.
P501 Inhoud/ verpakking afvoeren naar een erkend afvalverwerkingsbedrijf.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Ammoniumchloride EC: 235-186-4 12125-02-9 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Na inhalatie: frisse lucht.

Skin contact

Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen.

Eye contact

Na oog contact: uitspoelen met ruim voldoende water. Contactlenzen uitnemen.

Ingestion

Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen).

Immediate Medical Attention

Oogarts raadplegen. Een arts raadplegen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Gebruik blusmiddelen die geschikt zijn voor de plaatselijke omstandigheden en de omgeving.

Unsuitable media

Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.

Specific hazards

Niet brandbaar. Door brand in de omgeving is het ontstaan van gevaarlijke dampen mogelijk.

Instructions

Gassen/dampen/nevels neerslaan met behulp van een watersproeistraal.

Firefighter Protection

Bij brand een persluchtmasker dragen.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Vermijd stofinhalatie. Vermijd contact met de stof. Zorg voor voldoende ventilatie. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.

Environmental

Product niet in de riolering laten komen.

Cleanup methods

Droog opnemen. Vervuild oppervlak schoonmaken.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Voor voorzorgsmaatregelen zie hoofdstuk 2.2

Storage

Goed afgesloten. Droog. Aanbevolen bewaartemperatuur, zie productlabel.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Volledig contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L. Spad contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L.

Eyes

Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU).

Respiratory

nodig indien stofvorming plaatsvindt. Onze aanbevelingen voor het filteren van de ademhalingsbescherming zijn gebaseerd op de volgende normen: DIN EN 143, DIN 14387 en andere geldende normen m.b.t. het gebruikte ademhalingsbeschermingssysteem. Aanbevolen filtertype: Filter type P2. De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.

Skin/Body

beschermende kleding

Environmental

Product niet in de riolering laten komen.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Freezing Point
---
Appearance
Kristallijn poeder
Dynamic Viscosity
Geen gegevens beschikbaar
Odor
reukloos
Partition Coefficient
Geldt niet voor anorganisch stoffen
Solubility In Fat
---
Solidification Point
---
Lower Explosive Limit
Geen gegevens beschikbaar
Upper Explosive Limit
Geen gegevens beschikbaar
Ph
5 - 5,5 bij 25 °C
Properties Status
---
Colour
wit
Metal Corrosion
---
Relative Evaporation Rate
---
Odor Threshold
---
Vapor Density
---
State Under Standard Conditions
---
Solubility In Water
372 g/l bij 20 °C
Auto Ignition Temperature
> 400 °C - Relatieve zelfontbrandingstemperatuur van vaste stoffenontbrandt niet
Density
1,53 g cm3 bij 25 °C
Voc Content
---
Melting Point
Smeltpunt: 338 °C - (gesublimeerd)
Solubility
---
Crystallisation Point
---
Flash Point
Niet van toepassing
Vapor Pressure
1,3 hPa bij 160,4 °C 1,3 hPa bij 30 °C
Physical State
Kristallijn poeder
Flammability
Het product is niet brandbaar. - Ontvlambaarheid (vaste stoffen)
Kinematic Viscosity
Geen gegevens beschikbaar
Evaporation Rate
---
Explosive Limits
---
Colour Intensity
---
Cloud Point
---
Physical State Data
solid
Decomposition Temperature
Niet van toepassing
Softening Point
---
Bulk Density
circa 600 - 900 kg/m3
Boiling Point
520 °C
Form
---
Molecular Weight
---
Relative Density
Geen gegevens beschikbaar
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (kamertemperatuur).

Reactivity

Geen gegevens beschikbaar

Hazardous reactions

Heftige reacties mogelijk met: alkalihydroxiden, zuren. Kans op ontbranding of vorming van brandbare gassen of dampen met: halogeen-halogeen verbindingen, basisch afval, alkaline stoffen. Gevaar voor ontploffing met: nitraten, chloraten, Zware metaalzouten, nitrieten, Cyaanwaterstof (Blauwzuur), Chloor, zilverzout, Sterke oxidatiemiddelen.

Avoid

geen informatie beschikbaar

Incompatible

Aluminium, Lood, IJzer, Koper, koperverbindingen

Decomposition

In geval van brand: zie hoofdstuk 5

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?

The signal word is warning.

What is the physical form of Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?

Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur is a kristallijn poeder appearing as kristallijn poeder with wit color. It has reukloos odor.

What is Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur used for?

Reagens voor analyse

What are the hazard statements for Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?

This substance has 2 hazard statements:

  • H302: Schadelijk bij inslikken.
  • H319: Veroorzaakt ernstige oogirritatie.

What is the melting point of Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?

The melting point is Smeltpunt: 338 °C - (gesublimeerd) and the boiling point is 520 °C.