Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MC-Injekt 1264 compact - Komponente B
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxyhars, Injektionsstoffe, Hardingsmiddel
Uses advised against
Geen verdere relevante informatie verkrijgbaar.
Manufacturers & Suppliers
MC-BAUCHEMIE Müller
manufacturer
Am Kruppwald 2-8, D-46238 Bottrop
+49(0)2041 101-0
MC-Bauchemie N.V.
distributor
Intercity Business Park, Gen. De Wittelaan 17 A, B-2800 Mechelen
+32 (0)15 20 14 62
Emergency Contacts
Nationaal Vergiftigingen Informatie Centrum (NVIC)
+31 30 - 2748888
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polyamine-Addukt | --- | 25 - 50% | Yes |
| 3-aminomethyl-3,5,5-trimethylcyclohexylamine EC: 220-666-8 | 2855-13-2 | 25 - 50% | Yes |
| Benzylalcohol EC: 202-859-9 | 100-51-6 | 10 - 25% | Yes |
| Polyoxypropylenediamine | 9046-10-0 | 1 - 2.5% | Yes |
| 2,4,6-tris(dimethylaminomethyl)fenol EC: 202-013-9 | 90-72-2 | 0.1 - 1.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Voor verse lucht zorgen.
Onmiddellijk met water en zeep afwassen en goed naspoelen.
Ogen bij geopend ooglid een aantal minuten met stromend water spoelen. Medische behandeling inschakelen.
Overvloedig water nadrinken en verse lucht toevoeren. Onmiddellijk een arts consulteren.
Immediate Medical Attention
Medische behandeling inschakelen (oogcontact), onmiddellijk een arts consulteren (inslikken).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Brandblusmaatregelen op omgeving afstemmen.
Geen verdere relevante informatie verkrijgbaar.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Beschermende kleding aantrekken. Niet beschermde personen op afstand houden.
Indringen in afvalwater, riolering, putten of kelders verhinderen.
Met vloeistofbindend materiaal opnemen.
Related Products
Similar products with comparable safety profiles
MC-Injekt 1264 compact - Komponente A
---
MC-Injekt 2300 top - Komponente B
---
MC-Injekt 2300 top - Komponente A
---
MC-Injekt GL-95 - Komponente B
---
MC-Injekt GL-95 TX - Komponente B 1
---
MC-Injekt GL-95 - Komponente A 2
CAS: 2867-47-2
MC-Injekt GL-95 - Komponente A 3
---
MC-Injekt GL-95 - Komponente A 1
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Koel en droog opslaan in goed afgesloten vaten. Tanks voorzichtig openen en behandelen.
Koel en droog opslaan in goed afgesloten vaten. Tanks ondoordringbaar gesloten houden.
Geen bijzondere maatregelen noodzakelijk.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Geen aanvullende gegevens. Zie 7.
Veriligheidshandschoenen. Bij keuze van het handschoenmateriaal dient men rekening te houden met de penetratietijden, de permeatiegraden en de juiste degradatie. Na het gebruik van handschoenen huidreinigingsmiddel en huidverzorgingsmiddel gebruiken. Handschoenmateriaal: wanneer de risicoanalyse aangeeft dat dit noodzakelijk is, dienen bij het hanteren van chemische producten ondoorlaatbare handschoenen te worden gedragen die resistent zijn tegen chemicaliën en die voldoen aan een goedgekeurde norm. Referentienummer EN 374. Geschikt voor korte tijd gebruik of bescherming tegen spatten: De keuze van een geschikte handschoen is niet alleen afhankelijk van het materiaal, maar ook van andere kwaliteitskenmerken en verschilt van fabrikant tot fabrikant. Aangezien het product uit meerdere stoffen is samengesteld, is de duurzaamheid van de handschoenmaterialen niet vooraf berekenbaar en moet derhalve vóór het gebruik worden getest. Doordringingstijd: handschoenen van butyl rubber/nitril rubber. (0,4 mm), doorbraaktijd <30 min. Verontreinigde handschoenen moeten worden verwijderd. Geschikt voor permanente blootstelling: Viton handschoenen (0,4 mm) doorbraaktijd > 30 min. De precieze penetratietijd kunt u te weten komen bij de handschoenfabrikant; houd er rekening mee.
Schutbril. Montuurbril met zijbescherming dragen DIN-/ EN-normen: DIN EN 166.
Aanbevolen: huid preventief beschermen met huid beschermende zalf.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Geen ontleding bij gebruik volgens voorschrift.
Geen verdere relevante informatie verkrijgbaar.
Geen verdere relevante informatie verkrijgbaar.
Geen verdere relevante informatie verkrijgbaar.
Geen verdere relevante informatie verkrijgbaar.
Geen gevaarlijke ontbindingsproducten bekend.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2735
- Shipping Name
- AMINEN, VLOEIBAAR, BIJTEND, N.E.G. (I S O F O R O N D I A M I N E, Polyoxypropylenediamine)
- Transport Class
- 8
- Packing Group
- III
Waarschuwing: Bijtende stoffen
Waarschuwing: Bijtende stoffen
Waarschuwing: Bijtende stoffen
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MC-Injekt 1264 compact - Komponente B?
The signal word is danger.
What is the physical form of MC-Injekt 1264 compact - Komponente B?
MC-Injekt 1264 compact - Komponente B is a vloeibaar with doorschijnend color. It has amine-achtig odor.
What is MC-Injekt 1264 compact - Komponente B used for?
Epoxyhars, Injektionsstoffe, Hardingsmiddel
What are the hazard statements for MC-Injekt 1264 compact - Komponente B?
This substance has 4 hazard statements:
- H302: Schadelijk bij inslikken.
- H314: Veroorzaakt ernstige brandwonden.
- H317: Kan een allergische huidreactie veroorzaken.
- H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of MC-Injekt 1264 compact - Komponente B?
The melting point is niet bepaald and the boiling point is 205 °C.